[PATCH 1/3] i2c: meson: Use _SHIFT and _MASK for register definitions

Lucas Tanure tanure at linux.com
Sat Mar 26 03:22:27 PDT 2022


Differentiate between masks and shifts

Signed-off-by: Lucas Tanure <tanure at linux.com>
---
 drivers/i2c/busses/i2c-meson.c | 41 ++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 07eb819072c4..4b4a5b2d77ab 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -30,18 +30,21 @@
 #define REG_TOK_RDATA1		0x1c
 
 /* Control register fields */
-#define REG_CTRL_START		BIT(0)
-#define REG_CTRL_ACK_IGNORE	BIT(1)
-#define REG_CTRL_STATUS		BIT(2)
-#define REG_CTRL_ERROR		BIT(3)
-#define REG_CTRL_CLKDIV		GENMASK(21, 12)
-#define REG_CTRL_CLKDIVEXT	GENMASK(29, 28)
-
-#define REG_SLV_ADDR		GENMASK(7, 0)
-#define REG_SLV_SDA_FILTER	GENMASK(10, 8)
-#define REG_SLV_SCL_FILTER	GENMASK(13, 11)
-#define REG_SLV_SCL_LOW		GENMASK(27, 16)
-#define REG_SLV_SCL_LOW_EN	BIT(28)
+#define REG_CTRL_START			BIT(0)
+#define REG_CTRL_ACK_IGNORE		BIT(1)
+#define REG_CTRL_STATUS			BIT(2)
+#define REG_CTRL_ERROR			BIT(3)
+#define REG_CTRL_CLKDIV_SHIFT		12
+#define REG_CTRL_CLKDIV_MASK		GENMASK(21, REG_CTRL_CLKDIV_SHIFT)
+#define REG_CTRL_CLKDIVEXT_SHIFT	28
+#define REG_CTRL_CLKDIVEXT_MASK		GENMASK(29, REG_CTRL_CLKDIVEXT_SHIFT)
+
+#define REG_SLV_ADDR_MASK		GENMASK(7, 0)
+#define REG_SLV_SDA_FILTER_MASK		GENMASK(10, 8)
+#define REG_SLV_SCL_FILTER_MASK		GENMASK(13, 11)
+#define REG_SLV_SCL_LOW_SHIFT		16
+#define REG_SLV_SCL_LOW_MASK		GENMASK(27, REG_SLV_SCL_LOW_SHIFT)
+#define REG_SLV_SCL_LOW_EN		BIT(28)
 
 #define I2C_TIMEOUT_MS		500
 #define FILTER_DELAY		15
@@ -149,11 +152,11 @@ static void meson_i2c_set_clk_div(struct meson_i2c *i2c, unsigned int freq)
 		div = GENMASK(11, 0);
 	}
 
-	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV,
-			   FIELD_PREP(REG_CTRL_CLKDIV, div & GENMASK(9, 0)));
+	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK,
+			   FIELD_PREP(REG_CTRL_CLKDIV_MASK, div & GENMASK(9, 0)));
 
-	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT,
-			   FIELD_PREP(REG_CTRL_CLKDIVEXT, div >> 10));
+	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT_MASK,
+			   FIELD_PREP(REG_CTRL_CLKDIVEXT_MASK, div >> 10));
 
 	/* Disable HIGH/LOW mode */
 	meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_SCL_LOW_EN, 0);
@@ -292,8 +295,8 @@ static void meson_i2c_do_start(struct meson_i2c *i2c, struct i2c_msg *msg)
 		TOKEN_SLAVE_ADDR_WRITE;
 
 
-	meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_ADDR,
-			   FIELD_PREP(REG_SLV_ADDR, msg->addr << 1));
+	meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_ADDR_MASK,
+			   FIELD_PREP(REG_SLV_ADDR_MASK, msg->addr << 1));
 
 	meson_i2c_add_token(i2c, TOKEN_START);
 	meson_i2c_add_token(i2c, token);
@@ -467,7 +470,7 @@ static int meson_i2c_probe(struct platform_device *pdev)
 
 	/* Disable filtering */
 	meson_i2c_set_mask(i2c, REG_SLAVE_ADDR,
-			   REG_SLV_SDA_FILTER | REG_SLV_SCL_FILTER, 0);
+			   REG_SLV_SDA_FILTER_MASK | REG_SLV_SCL_FILTER_MASK, 0);
 
 	meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
 
-- 
2.35.1




More information about the linux-amlogic mailing list