net: stmmac: dwmac-meson8b: interface sometimes does not come up at boot
Jerome Brunet
jbrunet at baylibre.com
Wed Mar 2 05:39:47 PST 2022
On Wed 02 Mar 2022 at 12:01, Heiner Kallweit <hkallweit1 at gmail.com> wrote:
> On 02.03.2022 11:33, Erico Nunes wrote:
>> On Sat, Feb 26, 2022 at 2:53 PM Heiner Kallweit <hkallweit1 at gmail.com> wrote:
>>> Just to rule out that the PHY may be involved:
>>> - Does the issue occur with internal and/or external PHY?
>>
>> My target boards have the internal phy only. It is not possible for me
>> at the moment to test it with an external phy.
>>
>>> - Issue still occurs in PHY polling mode? (disable PHY interrupt in dts)
>>
>> Thanks for suggesting this. I did tests with this and it seems to be a
>> workaround.
>> With phy interrupt on recent kernels (around v5.17-rc3) I'm able to
>> reproduce the issue relatively easily over a batch of a hundred jobs.
>> With my tests with the phy in polling mode, I have not been able to
>> reproduce so far, even with several hundred jobs.
>>
> It's my understanding that in the problem case the "aneg complete"
> interrupt fires, but no data flows.
> This might indicate a timing issue. According to the meson PHY driver
> (I don't have the datasheet) the PHY doesn't have a "link up" interrupt
> source, just the mentioned "aneg complete".
>
> Below I send an experimental patch that delays the link up processing
> a little and eliminates not needed interrupt sources.
> Could you please test it with PHY interrupts enabled?
>
>
> By the way, to all:
> I found that interrupt mode is broken in fixed (aneg disabled) mode,
> because link-up isn't signaled. Experiments showed that irq source
> bit 7 can be used to fix this, but this bit isn't documented in the
> driver.
>
>> For completeness I also tested 46f69ded988d (from my initial analysis)
>> and setting the phy to polling mode there does not make a difference,
>> issue still reproduces. So it may have been a different bug. Though I
>> guess at this point we can disregard that and focus on the current
>> kernel.
>>
>> I tried adding a few debugs and delays to the interrupt code path in
>> drivers/net/phy/meson-gxl.c but nothing gave me useful info so far.
>>
>> Do you have more advice on how to proceed from here?
>>
>> Thanks
>>
>> Erico
>
> Heiner
Hi,
I also did some tests on my side as well. Mostly with v5.10.93 ATM
It is true that I can recall seeing this issue only on boards using the
internal PHY (g12 and gxl board for me - I don't have meson8b boards)
I tried on the u200 (g12 based). Being the ref design it has both
the internal and external interfaces and I can choose.
To my surprise, I could not reproduce the issue on it with the internal
PHY ... until I noticed that eMMC was initialising more or less at the
same time as the network.
I disabled the eMMC, out of curiosity, and the issue was back.
Like Heiner, I suspect a timing issue - at this stage, I can't tell if it
is PHY related though.
I also tried with the external phy, could not reproduce. Unfortunately,
as we can see from the first test on the u200, not reproducing is not
really a proof and it difficult to conclude.
Like Erico, I tried bisecting but I ended up on a BT merge ... Clearly
inconclusive :(
Disabling the IRQ is an interesting test but, on my side, I have mixed
results (on the libretech-cc this time):
* I first tried quickly while bisecting, on commit
5.6.0-rc3-01434-g8d4ccd7770e7:
- With IRQ => NOK
- POLL => NOK
Seeing Erico's report, I thought maybe I mixed things up so I tried again,
doubled checked IRQ were disabled ... still broken. There was another
commit I reproduce it without IRQ but I lost it.
* I also tried on v5.10.93:
- With IRQ => NOK
- POLL => OK ... (well, I got bored before the issue showed up)
It seems that switching to polling, in some case, changes the timings
just enough to hide the issue ... but not always. Unless I forgot to
consider something else ?? Ideas ?
If I understand the proposed patch correctly, it is mostly about the phy
IRQ. Since I reproduce without the IRQ, I suppose it is not the
problem we where looking for (might still be a problem worth fixing -
the phy is not "rock-solid" when it comes to aneg - I already tried
stabilising it a few years ago)
TBH, It bothers me that I reproduced w/o the IRQ. The idea makes
sense :/
>
>
> diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
> index 7e7904fee..0acb3a99a 100644
> --- a/drivers/net/phy/meson-gxl.c
> +++ b/drivers/net/phy/meson-gxl.c
> @@ -7,6 +7,7 @@
> * Author: Neil Armstrong <narmstrong at baylibre.com>
> */
> #include <linux/kernel.h>
> +#include <linux/delay.h>
> #include <linux/module.h>
> #include <linux/mii.h>
> #include <linux/ethtool.h>
> @@ -209,12 +210,7 @@ static int meson_gxl_config_intr(struct phy_device *phydev)
> if (ret)
> return ret;
>
> - val = INTSRC_ANEG_PR
> - | INTSRC_PARALLEL_FAULT
> - | INTSRC_ANEG_LP_ACK
> - | INTSRC_LINK_DOWN
> - | INTSRC_REMOTE_FAULT
> - | INTSRC_ANEG_COMPLETE;
> + val = INTSRC_LINK_DOWN | INTSRC_ANEG_COMPLETE;
> ret = phy_write(phydev, INTSRC_MASK, val);
> } else {
> val = 0;
> @@ -240,6 +236,9 @@ static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev)
> if (irq_status == 0)
> return IRQ_NONE;
>
> + if (irq_status & INTSRC_ANEG_COMPLETE)
> + msleep(100);
> +
> phy_trigger_machine(phydev);
>
> return IRQ_HANDLED;
More information about the linux-amlogic
mailing list