[PATCH v2 1/1] arm64: dts: meson: add gpio-fan control to GS-King-X

[Neil Armstrong]

On 16/05/2022 14:25, Furkan Kardame wrote:
> GS-King-X has a single speed GPIO fan which is always-on by default. If
> we add controls for the fan and a trip point, the fan stays off most of
> the time, reducing background noise from the unit.
> 
> Signed-off-by: Furkan Kardame <f.kardame at manjaro.org>
> ---
>   .../boot/dts/amlogic/meson-g12b-gsking-x.dts  | 26 +++++++++++++++++++
>   1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
> index 6c7bfacba..243410913 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
> @@ -19,6 +19,15 @@ aliases {
>   		rtc0 = &rtc;
>   		rtc1 = &vrtc;
>   	};
> +
> +	gpio_fan: gpio-fan {
> +		compatible = "gpio-fan";
> +		gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
> +		/* Using Dummy Speed */
> +		gpio-fan,speed-map = <0 0
> +					1 1>;

The speed-map is not correctly indented, it should be:

gpio-fan,speed-map = <0 0>, <1 1>;

> +		#cooling-cells = <2>;
> +		};

This bracked is not correctly aligned

>   
>   	gpio-keys-polled {
>   		compatible = "gpio-keys-polled";
> @@ -131,3 +140,20 @@ &tdmout_a {
>   &tohdmitx {
>   	status = "okay";
>   };
> +
> +&cpu_thermal {
> +	trips {
> +		cpu_active: cpu-active
> +			temperature = <60000>; /* millicelsius */
> +			hysteresis = <2000>; /* millicelsius */
> +			type = "active";
> +		};
> +	};
> +
> +	cooling-maps {
> +		map {
> +			trip = <&cpu_active>;
> +			cooling-device = <&gpio_fan 1 THERMAL_NO_LIMIT>;

This should be: cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;

> +		};
> +	};
> +};

Thanks,
Neil