[PATCH] Add MagicBox M16S support

Neil Armstrong narmstrong at baylibre.com
Thu Jul 21 10:55:03 PDT 2022


On 21/07/2022 16:37, Zhang Ning wrote:
> On Mon, Jul 18, 2022 at 10:02:32AM +0200, Neil Armstrong wrote:
> 
> Thank you for review.
>> Hi,
>>
>> On 12/07/2022 16:24, Zhang Ning wrote:
>>> MagicBox M16S or MagicBox 3Pro is popular Tv box in China.
>>>
>>> it's gxm_q201_v1 according u-boot log.
>>> and it's almost same as Q201 reference design.
>>>
>>> add a simple dts to support this Tv box.
>>>
>>> Signed-off-by: Zhang Ning <zhangn1985 at qq.com>
>>> ---
>>>    arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>>>    .../dts/amlogic/meson-gxm-magicbox-m16s.dts   | 20 +++++++++++++++++++
>>>    2 files changed, 21 insertions(+)
>>>    create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>>> index 8773211df50e..e0907fb41829 100644
>>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>>> @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
>>>    dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
>>>    dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
>>>    dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
>>> +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-magicbox-m16s.dtb
>>>    dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
>>>    dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
>>>    dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
>>> new file mode 100644
>>> index 000000000000..be543d65a529
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
>>> @@ -0,0 +1,20 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +/*
>>> + * Copyright (c) 2022 Zhang Ning <zhangn1985 at qq.com>
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "meson-gxm.dtsi"
>>> +#include "meson-gx-p23x-q20x.dtsi"
>>> +#include <dt-bindings/input/input.h>
>>> +#include <dt-bindings/leds/common.h>
>>> +
>>> +/ {
>>> +	compatible = "magicbox,m16s", "amlogic,s912", "amlogic,meson-gxm";
>>> +	model = "MagicBox M16S";
>>> +};
>>
>> The compatible should be documented in the DT bindings in:
>> Documentation/devicetree/bindings/arm/amlogic.yaml
> 
> I will update this part next version.
>>
>>> +&ethmac {
>>> +        phy-mode = "rmii";
>>> +        phy-handle = <&internal_phy>;
>>> +};
>>
>> Is the sd_emmc_a change incompatible with the M16S ?
> 
> sd_emmc_a is used as SDIO for wifi/bt. and wifi/bt works with this dtb.
> I checked mrvl-sd8997 DT bindings,  missing a lot of properties need
> by mrvl-sd8997.
> 
> I don't have schematics to fill these properties, need more time to
> check vendor OS or try each GPIO.

Ok fine no problem, you can push it later when you figure out the properties.

>>
>> Neil

Neil



More information about the linux-amlogic mailing list