[PATCH V5 2/2] soc: s4: Add support for power domains controller

[Shunzhou Jiang]

Add support s4 Power controller. In s4, power control
registers are in secure domain, and should be accessed by smc.

Signed-off-by: Shunzhou Jiang <shunzhou.jiang at amlogic.com>
---
V1->V2: fix spelling error, patchset use cover-letter
v2->V3: add power domain always on reason
v3->V4: clear vpu and usb power domaon always on
V4->v5: add review owner in patchset
---
 drivers/soc/amlogic/meson-secure-pwrc.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
index 59bd195fa9c9..a10a417a87db 100644
--- a/drivers/soc/amlogic/meson-secure-pwrc.c
+++ b/drivers/soc/amlogic/meson-secure-pwrc.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <dt-bindings/power/meson-a1-power.h>
+#include <dt-bindings/power/meson-s4-power.h>
 #include <linux/arm-smccc.h>
 #include <linux/firmware/meson/meson_sm.h>
 #include <linux/module.h>
@@ -119,6 +120,18 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
 	SEC_PD(RSA,	0),
 };
 
+static struct meson_secure_pwrc_domain_desc s4_pwrc_domains[] = {
+	SEC_PD(S4_DOS_HEVC,	0),
+	SEC_PD(S4_DOS_VDEC,	0),
+	SEC_PD(S4_VPU_HDMI,	0),
+	SEC_PD(S4_USB_COMB,	0),
+	SEC_PD(S4_GE2D,		0),
+	/* ETH is for ethernet online wakeup, and should be always on */
+	SEC_PD(S4_ETH,		GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(S4_DEMOD,	0),
+	SEC_PD(S4_AUDIO,	0),
+};
+
 static int meson_secure_pwrc_probe(struct platform_device *pdev)
 {
 	int i;
@@ -187,11 +200,20 @@ static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
 	.count = ARRAY_SIZE(a1_pwrc_domains),
 };
 
+static struct meson_secure_pwrc_domain_data meson_secure_s4_pwrc_data = {
+	.domains = s4_pwrc_domains,
+	.count = ARRAY_SIZE(s4_pwrc_domains),
+};
+
 static const struct of_device_id meson_secure_pwrc_match_table[] = {
 	{
 		.compatible = "amlogic,meson-a1-pwrc",
 		.data = &meson_secure_a1_pwrc_data,
 	},
+	{
+		.compatible = "amlogic,meson-s4-pwrc",
+		.data = &meson_secure_s4_pwrc_data,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, meson_secure_pwrc_match_table);
-- 
2.34.1