[PATCH RESEND v2 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver
Jerome Brunet
jbrunet at baylibre.com
Mon Feb 28 03:36:32 PST 2022
On Thu 17 Feb 2022 at 14:33, Liang Yang <liang.yang at amlogic.com> wrote:
> convert txt to yaml and refine the meson NFC clock document.
>
> Signed-off-by: Liang Yang <liang.yang at amlogic.com>
> ---
> .../bindings/mtd/amlogic,meson-nand.txt | 60 ----------------
> .../bindings/mtd/amlogic,meson-nand.yaml | 70 +++++++++++++++++++
> 2 files changed, 70 insertions(+), 60 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
> create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>
> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
> deleted file mode 100644
> index 5794ab1147c1..000000000000
> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
> +++ /dev/null
> @@ -1,60 +0,0 @@
> -Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
> -
> -This file documents the properties in addition to those available in
> -the MTD NAND bindings.
> -
> -Required properties:
> -- compatible : contains one of:
> - - "amlogic,meson-gxl-nfc"
> - - "amlogic,meson-axg-nfc"
> -- clocks :
> - A list of phandle + clock-specifier pairs for the clocks listed
> - in clock-names.
> -
> -- clock-names: Should contain the following:
> - "core" - NFC module gate clock
> - "device" - device clock from eMMC sub clock controller
> - "rx" - rx clock phase
> - "tx" - tx clock phase
> -
> -- amlogic,mmc-syscon : Required for NAND clocks, it's shared with SD/eMMC
> - controller port C
> -
> -Optional children nodes:
> -Children nodes represent the available nand chips.
> -
> -Other properties:
> -see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
> -
> -Example demonstrate on AXG SoC:
> -
> - sd_emmc_c_clkc: mmc at 7000 {
> - compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
> - reg = <0x0 0x7000 0x0 0x800>;
> - };
> -
> - nand-controller at 7800 {
> - compatible = "amlogic,meson-axg-nfc";
> - reg = <0x0 0x7800 0x0 0x100>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
> -
> - clocks = <&clkc CLKID_SD_EMMC_C>,
> - <&sd_emmc_c_clkc CLKID_MMC_DIV>,
> - <&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
> - <&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
> - clock-names = "core", "device", "rx", "tx";
> - amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&nand_pins>;
> -
> - nand at 0 {
> - reg = <0>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - nand-on-flash-bbt;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
> new file mode 100644
> index 000000000000..671f0a8fdc7c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/amlogic,mmc-clkc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
> +
> +maintainers:
> + - liang.yang at amlogic.com
> +
> +properties:
> + compatible:
> + enum:
> + - "amlogic,meson-gxl-nfc"
> + - "amlogic,meson-axg-nfc"
> +
> + reg:
> + maxItems: 2
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 2
> +
> + clock-names:
> + items:
> + - const: "core", "device"
> +
> + "#clock-cells":
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - "#clock-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + nand-controller at 7800 {
> + compatible = "amlogic,meson-axg-nfc";
> + reg = <0x0 0x7800 0x0 0x100>,
> + <0x0 0x7000 0x0 0x1>;
Please name the register ressources instead of relying on the order
Also, use the actual size of region, not the size you are using in the
driver. AFAIK, the size of the 2nd region is not 0x1
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
> +
> + clocks = <&clkc CLKID_SD_EMMC_C>,
> + <&clkc CLKID_FCLK_DIV2>;
> + clock-names = "core", "device";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&nand_pins>;
> +
> + nand at 0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + nand-on-flash-bbt;
> + };
> + };
> +
> +...
> \ No newline at end of file
More information about the linux-amlogic
mailing list