[PATCH AUTOSEL 5.10 09/23] arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610

[Sasha Levin]

From: Christian Hewitt <christianshewitt at gmail.com>

[ Upstream commit f26573e2bc9dfd551a0d5c6971f18cc546543312 ]

The BL32/TEE reserved-memory region is now inherited from the common
family dtsi (meson-g12-common) so we can drop it from board files.

Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>
Reviewed-by: Kevin Hilman <khilman at baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 8 --------
 arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts  | 8 --------
 2 files changed, 16 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 4d5b3e514b514..71f91e31c1818 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -157,14 +157,6 @@ vddio_ao1v8: regulator-vddio_ao1v8 {
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32 at 5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 5ab139a34c018..c21178e9c6064 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -203,14 +203,6 @@ vddio_ao1v8: regulator-vddio_ao1v8 {
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32 at 5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
-- 
2.34.1