VIM1's wifi doesn't work after update to Linux 6.1
Zhang Ning
zhangn1985 at outlook.com
Sat Dec 17 18:00:46 PST 2022
My VIM3 also meet same problem.
On Thu, Dec 08, 2022 at 09:02:00PM +0800, Zhang Ning wrote:
> Hi,
>
> After update khadas VIM1's kernel to 6.1-rc7, WIFI stop working, with
> below log:
>
> [ 363.591315] INFO: task kworker/0:2:157 blocked for more than 120 seconds.
> [ 363.598130] Tainted: G C 6.1.0-0-arm64 #1 Debian 6.1~rc7-2~exp1
> [ 363.605870] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 363.613682] task:kworker/0:2 state:D stack:0 pid:157 ppid:2 flags:0x00000008
> [ 363.621938] Workqueue: events sdio_irq_work
> [ 363.625989] Call trace:
> [ 363.628294] __switch_to+0xe4/0x160
> [ 363.631812] __schedule+0x340/0x970
> [ 363.635300] schedule+0x58/0xf0
> [ 363.638351] __mmc_claim_host+0x104/0x290
> [ 363.642371] sdio_irq_work+0x2c/0x90
> [ 363.645861] process_one_work+0x1f4/0x460
> [ 363.649879] worker_thread+0x188/0x4d0
> [ 363.653547] kthread+0xe0/0xe4
> [ 363.656523] ret_from_fork+0x10/0x20
> [ 363.661253] INFO: task ksdioirqd/mmc2:408 blocked for more than 121 seconds.
> [ 363.668216] Tainted: G C 6.1.0-0-arm64 #1 Debian 6.1~rc7-2~exp1
> [ 363.674977] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 363.682750] task:ksdioirqd/mmc2 state:D stack:0 pid:408 ppid:2 flags:0x00000008
> [ 363.690961] Call trace:
> [ 363.693272] __switch_to+0xe4/0x160
> [ 363.696715] __schedule+0x340/0x970
> [ 363.700154] schedule+0x58/0xf0
> [ 363.703285] __mmc_claim_host+0x104/0x290
> [ 363.707243] sdio_irq_thread+0x84/0x204
> [ 363.711000] kthread+0xe0/0xe4
> [ 363.714056] ret_from_fork+0x10/0x20
>
> I searched linux-wireless and linux-amlogic maillist no similar issue
> reported.
>
> I applied "WIP-arm64-dts-meson-set-p212-p23x-q20x-SDIO-to-100MH.patch"
> to VIM1's kernel 6.1.0-rc7, is it related?
>
> thanks.
> Ning.
More information about the linux-amlogic
mailing list