[PATCH v8 01/11] dt-bindings: clock: meson: add A1 PLL clock controller bindings

[Jerome Brunet]

On Fri 02 Dec 2022 at 11:39, Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> wrote:

> On 02/12/2022 10:51, Dmitry Rokosov wrote:
>> On Thu, Dec 01, 2022 at 10:10:04PM -0600, Rob Herring wrote:
>>>
>>> On Fri, 02 Dec 2022 01:56:53 +0300, Dmitry Rokosov wrote:
>>>> From: Jian Hu <jian.hu at amlogic.com>
>>>>
>>>> Add the documentation to support Amlogic A1 PLL clock driver,
>>>> and add A1 PLL clock controller bindings.
>>>>
>>>> Signed-off-by: Jian Hu <jian.hu at amlogic.com>
>>>> Signed-off-by: Dmitry Rokosov <ddrokosov at sberdevices.ru>
>>>> ---
>>>>  .../bindings/clock/amlogic,a1-pll-clkc.yaml   | 52 +++++++++++++++++++
>>>>  include/dt-bindings/clock/a1-pll-clkc.h       | 16 ++++++
>>>>  2 files changed, 68 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>>>>  create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h
>>>>
>>>
>>> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
>>> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>>>
>>> yamllint warnings/errors:
>>> ./Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml:26:6: [warning] wrong indentation: expected 6 but found 5 (indentation)
>>>
>>> dtschema/dtc warnings/errors:
>>> ./Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml: $id: relative path/filename doesn't match actual path or filename
>>> 	expected: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml#
>>> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.example.dtb: pll-clock-controller at 7c80: reg: [[0, 31872], [0, 396]] is too long
>>> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>>>
>>> doc reference errors (make refcheckdocs):
>>>
>>> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221201225703.6507-2-ddrokosov@sberdevices.ru
>>>
>>> The base for the series is generally the latest rc1. A different dependency
>>> should be noted in *this* patch.
>>>
>>> If you already ran 'make dt_binding_check' and didn't see the above
>>> error(s), then make sure 'yamllint' is installed and dt-schema is up to
>>> date:
>>>
>>> pip3 install dtschema --upgrade
>>>
>>> Please check and re-submit after running the above command yourself. Note
>>> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
>>> your schema. However, it must be unset to test all examples with your schema.
>>>
>> 
>> Please find all fixes of above warnings and errors in the my patch
>> located at the link:
>> 
>> https://lore.kernel.org/linux-amlogic/20221201225703.6507-9-ddrokosov@sberdevices.ru/
>
> Why? This patch here is broken and it should be fixed. Don't apply
> broken patches...

Dmitry is ressurecting a series that is several years old and not his to
begin with.

He was unsure about take the code of somebody else.
To be fair, he even asked for advice on IRC about to proceed.

Dmitry, as you may have guessed, for next revision, please fix Jian Hu
original patches in place, not with fixup patches.

If your fixes are minor (not complete rewrite), please keep the original
author and add your SoB

>
> Best regards,
> Krzysztof