[PATCH v3 1/2] mmc: meson: adjust and re-use constant IRQ_EN_MASK

Heiner Kallweit hkallweit1 at gmail.com
Thu Aug 25 12:53:42 PDT 2022


Constant IRQ_EN_MASK has no user currently. In preparation of adding
SDIO interrupt support, revive it and adjust it to our needs.

Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
---
v2:
- patch added to series
---
 drivers/mmc/host/meson-gx-mmc.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index dbc9fac8f..9a4da2544 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -101,8 +101,7 @@
 #define   IRQ_RESP_STATUS BIT(14)
 #define   IRQ_SDIO BIT(15)
 #define   IRQ_EN_MASK \
-	(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN | IRQ_RESP_STATUS |\
-	 IRQ_SDIO)
+	(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN)
 
 #define SD_EMMC_CMD_CFG 0x50
 #define SD_EMMC_CMD_ARG 0x54
@@ -940,17 +939,16 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
 	struct meson_host *host = dev_id;
 	struct mmc_command *cmd;
 	struct mmc_data *data;
-	u32 irq_en, status, raw_status;
+	u32 status, raw_status;
 	irqreturn_t ret = IRQ_NONE;
 
-	irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
 	raw_status = readl(host->regs + SD_EMMC_STATUS);
-	status = raw_status & irq_en;
+	status = raw_status & IRQ_EN_MASK;
 
 	if (!status) {
 		dev_dbg(host->dev,
-			"Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
-			 irq_en, raw_status);
+			"Unexpected IRQ! irq_en 0x%08lx - status 0x%08x\n",
+			 IRQ_EN_MASK, raw_status);
 		return IRQ_NONE;
 	}
 
@@ -1230,10 +1228,8 @@ static int meson_mmc_probe(struct platform_device *pdev)
 
 	/* clear, ack and enable interrupts */
 	writel(0, host->regs + SD_EMMC_IRQ_EN);
-	writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN,
-	       host->regs + SD_EMMC_STATUS);
-	writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN,
-	       host->regs + SD_EMMC_IRQ_EN);
+	writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
+	writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
 
 	ret = request_threaded_irq(host->irq, meson_mmc_irq,
 				   meson_mmc_irq_thread, IRQF_ONESHOT,
-- 
2.37.2






More information about the linux-amlogic mailing list