[PATCH v1 35/35] drm/modes: Introduce more named modes
Noralf Trønnes
noralf at tronnes.org
Sun Aug 21 09:16:15 PDT 2022
Den 29.07.2022 18.35, skrev Maxime Ripard:
> Now that we can easily extend the named modes list, let's add a few more
> analog TV modes that were used in the wild, and some unit tests to make
> sure it works as intended.
>
> Signed-off-by: Maxime Ripard <maxime at cerno.tech>
>
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> index 3634ac9f787d..09ed5ce7746d 100644
> --- a/drivers/gpu/drm/drm_modes.c
> +++ b/drivers/gpu/drm/drm_modes.c
> @@ -1853,7 +1853,9 @@ struct drm_named_mode {
>
> static const struct drm_named_mode drm_named_modes[] = {
> { "NTSC", &drm_mode_480i, DRM_MODE_TV_NORM_NTSC_M, },
> + { "NTSC_J", &drm_mode_480i, DRM_MODE_TV_NORM_NTSC_J, },
> { "PAL", &drm_mode_576i, DRM_MODE_TV_NORM_PAL_B, },
> + { "PAL_M", &drm_mode_480i, DRM_MODE_TV_NORM_PAL_M, },
Please use a dash instead of an underscore to keep it consistent with
what's used elsewhere.
I tried to use PAL and set the connector as connected, but that didn't
work: video=Composite-1:PALe
Is this a bug and it should work or should it be phrased differently?
It would have been nice to get a warning in the log if the parser fails
to understand.
This very verbose version did work:
video=Composite-1:720x576 at 50ie,tv_mode=PAL-B
(it seems to me that userspace often treats connection status "unknown"
the same as "disconnected")
Noralf.
> };
>
> static bool drm_mode_parse_cmdline_named_mode(const char *name,
> diff --git a/drivers/gpu/drm/tests/drm_mode_test.c b/drivers/gpu/drm/tests/drm_mode_test.c
> index 006b73a61fd4..991eb8ed687c 100644
> --- a/drivers/gpu/drm/tests/drm_mode_test.c
> +++ b/drivers/gpu/drm/tests/drm_mode_test.c
> @@ -156,6 +156,32 @@ static void drm_mode_named_ntsc(struct kunit *test)
> KUNIT_EXPECT_TRUE(test, drm_mode_equal(&drm_mode_480i, mode));
> }
>
> +static void drm_mode_named_ntsc_j(struct kunit *test)
> +{
> + struct drm_mode_test_priv *priv = test->priv;
> + struct drm_device *drm = priv->drm;
> + struct drm_connector *connector = &priv->connector;
> + struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
> + struct drm_display_mode *mode;
> + const char *cmdline = "NTSC_J";
> + int ret;
> +
> + KUNIT_ASSERT_TRUE(test,
> + drm_mode_parse_command_line_for_connector(cmdline,
> + connector,
> + cmdline_mode));
> +
> + mutex_lock(&drm->mode_config.mutex);
> + ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
> + mutex_unlock(&drm->mode_config.mutex);
> + KUNIT_ASSERT_GT(test, ret, 0);
> +
> + mode = drm_connector_pick_cmdline_mode(connector);
> + KUNIT_ASSERT_PTR_NE(test, mode, NULL);
> +
> + KUNIT_EXPECT_TRUE(test, drm_mode_equal(&drm_mode_480i, mode));
> +}
> +
> static void drm_mode_named_pal(struct kunit *test)
> {
> struct drm_mode_test_priv *priv = test->priv;
> @@ -182,10 +208,38 @@ static void drm_mode_named_pal(struct kunit *test)
> KUNIT_EXPECT_TRUE(test, drm_mode_equal(&drm_mode_576i, mode));
> }
>
> +static void drm_mode_named_pal_m(struct kunit *test)
> +{
> + struct drm_mode_test_priv *priv = test->priv;
> + struct drm_device *drm = priv->drm;
> + struct drm_connector *connector = &priv->connector;
> + struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
> + struct drm_display_mode *mode;
> + const char *cmdline = "PAL_M";
> + int ret;
> +
> + KUNIT_ASSERT_TRUE(test,
> + drm_mode_parse_command_line_for_connector(cmdline,
> + connector,
> + cmdline_mode));
> +
> + mutex_lock(&drm->mode_config.mutex);
> + ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
> + mutex_unlock(&drm->mode_config.mutex);
> + KUNIT_ASSERT_GT(test, ret, 0);
> +
> + mode = drm_connector_pick_cmdline_mode(connector);
> + KUNIT_ASSERT_PTR_NE(test, mode, NULL);
> +
> + KUNIT_EXPECT_TRUE(test, drm_mode_equal(&drm_mode_480i, mode));
> +}
> +
> static struct kunit_case drm_mode_tests[] = {
> KUNIT_CASE(drm_mode_res_1920_1080_60),
> KUNIT_CASE(drm_mode_named_ntsc),
> + KUNIT_CASE(drm_mode_named_ntsc_j),
> KUNIT_CASE(drm_mode_named_pal),
> + KUNIT_CASE(drm_mode_named_pal_m),
> {}
> };
>
>
More information about the linux-amlogic
mailing list