[PATCH v1 05/35] drm/connector: Add TV standard property
Geert Uytterhoeven
geert at linux-m68k.org
Wed Aug 17 06:05:52 PDT 2022
Hi Maxime,
On Wed, Aug 17, 2022 at 1:15 PM Maxime Ripard <maxime at cerno.tech> wrote:
> On Wed, Aug 17, 2022 at 10:35:07AM +0200, Geert Uytterhoeven wrote:
> > On Wed, Aug 17, 2022 at 9:47 AM Maxime Ripard <maxime at cerno.tech> wrote:
> > > On Wed, Aug 17, 2022 at 09:31:18AM +0200, Geert Uytterhoeven wrote:
> > > > On Tue, Aug 16, 2022 at 5:50 PM Maxime Ripard <maxime at cerno.tech> wrote:
> > > > > On Tue, Aug 16, 2022 at 04:43:44PM +0200, Geert Uytterhoeven wrote:
> > > > > > > > > > Either you have to add them here (e.g. "hd720p50" and "hd720p60"), or
> > > > > > > > > > handle them through "@<refresh>". The latter would impact "[PATCH v1
> > > > > > > > > > 09/35] drm/modes: Move named modes parsing to a separate function", as
> > > > > > > > > > currently a named mode and a refresh rate can't be specified both.
> > > > > > > > >
> > > > > > > > > I think the former would make more sense. It simplifies a bit the
> > > > > > > > > parser, and we're going to use a named mode anyway.
> > > > > > > > >
> > > > > > > > > > As "[PATCH v1 34/35] drm/modes: Introduce the tv_mode property as a
> > > > > > > > > > command-line option" uses a separate "tv_mode" option, and not the main
> > > > > > > > > > mode name, I think you want to add them here.
> > > > > > > > >
> > > > > > > > > It's a separate story I think, we could have a named mode hd720p50,
> > > > > > > > > which would be equivalent to 1280x720,tv_mode=hd720p
> > > > > > > >
> > > > > > > > So where's the field rate in "1280x720,tv_mode=hd720p"?
> > > > > > >
> > > > > > > Yeah, sorry I meant 1280x720 at 50,tv_mode=hd720p
> > > > > >
> > > > > > Above you said "I think the former would make more sense", so that
> > > > > > should be "1280x720,tv_mode=hd720p50"?
> > > > >
> > > > > No, 720p at 50Hz would be either hd720p50 or 1280x720 at 50,tv_mode=hd720p
> > > > > and 60Hz would be hd720p60 or 1280x720 at 60,tv_mode=hd720p
> > > >
> > > > I disagree: hd720p50 and hd720p60 are different TV modes.
> > >
> > > I agree, and I don't see how that command-line doesn't express that?
> >
> > Oh, I see what you mean: yes, it expresses that.
> > But it is inconsistent with the NTSC/PAL/SECAM/hd{480,576}[ip] modes,
> > where the TV mode specifies both number of lines and frame rate.
>
> Only if we're using a named mode, and naming is hard :)
That's not true: "640x480,tv_mode=PAL-N" would give me a mode with
625 lines and 25 frames/s, "640x480,tv_mode=PAL-M" would give me a
mode with 525 lines and 30 frames/s.
> Honestly, I'd be inclined to drop the hd* for now from this series. I
> don't have a hardware to test it with, for some we don't even have
> drivers that could implement these modes, we don't have a spec to work
> from, it looks like a recipe for failure :)
OK.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
More information about the linux-amlogic
mailing list