[PATCH V3 3/6] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver
Yu Tu
yu.tu at amlogic.com
Sun Aug 14 23:34:12 PDT 2022
Hi Jerome,
On 2022/8/10 21:47, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
>
>
> On Fri 05 Aug 2022 at 16:57, Yu Tu <yu.tu at amlogic.com> wrote:
>
>> Add the S4 PLL clock controller found in the s4 SoC family.
>>
>> Signed-off-by: Yu Tu <yu.tu at amlogic.com>
>> ---
>> drivers/clk/meson/Kconfig | 12 +
>> drivers/clk/meson/Makefile | 1 +
>> drivers/clk/meson/s4-pll.c | 891 +++++++++++++++++++++++++++++++++++++
>> drivers/clk/meson/s4-pll.h | 88 ++++
>> 4 files changed, 992 insertions(+)
>> create mode 100644 drivers/clk/meson/s4-pll.c
>> create mode 100644 drivers/clk/meson/s4-pll.h
>>
>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> index fc002c155bc3..f4244edc7b28 100644
>> --- a/drivers/clk/meson/Kconfig
>> +++ b/drivers/clk/meson/Kconfig
>> @@ -115,4 +115,16 @@ config COMMON_CLK_G12A
>> help
>> Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
>> devices, aka g12a. Say Y if you want peripherals to work.
>> +
>> +config COMMON_CLK_S4_PLL
>> + tristate "S4 SoC PLL clock controllers support"
>> + depends on ARM64
>> + default y
>> + select COMMON_CLK_MESON_MPLL
>> + select COMMON_CLK_MESON_PLL
>> + select COMMON_CLK_MESON_REGMAP
>> + help
>> + Support for the pll clock controller on Amlogic S805X2 and S905Y4 devices,
>> + aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229.
>> + Say Y if you want peripherals and CPU frequency scaling to work.
>
> Looks like this doc is copy/paste of the peripheral controller.
> This probably needs to be updated
Okay.
>
>> endmenu
>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> index 6eca2a406ee3..376f49cc13f1 100644
>> --- a/drivers/clk/meson/Makefile
>> +++ b/drivers/clk/meson/Makefile
>> @@ -19,3 +19,4 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>> obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
>> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
>> +obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o
>> diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c
>> new file mode 100644
>> index 000000000000..478c78b5ed46
>> --- /dev/null
>> +++ b/drivers/clk/meson/s4-pll.c
>> @@ -0,0 +1,891 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Amlogic Meson-S4 Clock Controller Driver
>> + *
>> + * Copyright (c) 2021 Amlogic, inc.
>> + * Author: Yu Tu <yu.tu at amlogic.com>
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "clk-mpll.h"
>> +#include "clk-pll.h"
>> +#include "clk-regmap.h"
>> +#include "s4-pll.h"
>> +
>> +static DEFINE_SPINLOCK(meson_clk_lock);
>> +
>> +static struct clk_regmap s4_fixed_pll_dco = {
>> + .data = &(struct meson_clk_pll_data){
>> + .en = {
>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>> + .shift = 28,
>> + .width = 1,
>> + },
>> + .m = {
>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>> + .shift = 0,
>> + .width = 8,
>> + },
>> + .n = {
>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>> + .shift = 10,
>> + .width = 5,
>> + },
>> + .frac = {
>> + .reg_off = ANACTRL_FIXPLL_CTRL1,
>> + .shift = 0,
>> + .width = 17,
>> + },
>> + .l = {
>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>> + .shift = 31,
>> + .width = 1,
>> + },
>> + .rst = {
>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>> + .shift = 29,
>> + .width = 1,
>> + },
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fixed_pll_dco",
>> + .ops = &meson_clk_pll_ro_ops,
>> + .parent_data = (const struct clk_parent_data []) {
>> + { .fw_name = "xtal", }
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fixed_pll = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = ANACTRL_FIXPLL_CTRL0,
>> + .shift = 16,
>> + .width = 2,
>> + .flags = CLK_DIVIDER_POWER_OF_TWO,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fixed_pll",
>> + .ops = &clk_regmap_divider_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fixed_pll_dco.hw
>> + },
>> + .num_parents = 1,
>> + /*
>> + * This clock won't ever change at runtime so
>> + * CLK_SET_RATE_PARENT is not required
>> + */
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_fclk_div2_div = {
>> + .mult = 1,
>> + .div = 2,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div2_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fclk_div2 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_FIXPLL_CTRL1,
>> + .bit_idx = 24,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div2",
>> + .ops = &clk_regmap_gate_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fclk_div2_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_fclk_div3_div = {
>> + .mult = 1,
>> + .div = 3,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div3_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fclk_div3 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_FIXPLL_CTRL1,
>> + .bit_idx = 20,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div3",
>> + .ops = &clk_regmap_gate_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fclk_div3_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_fclk_div4_div = {
>> + .mult = 1,
>> + .div = 4,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div4_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fclk_div4 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_FIXPLL_CTRL1,
>> + .bit_idx = 21,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div4",
>> + .ops = &clk_regmap_gate_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fclk_div4_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_fclk_div5_div = {
>> + .mult = 1,
>> + .div = 5,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div5_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fclk_div5 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_FIXPLL_CTRL1,
>> + .bit_idx = 22,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div5",
>> + .ops = &clk_regmap_gate_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fclk_div5_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_fclk_div7_div = {
>> + .mult = 1,
>> + .div = 7,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div7_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fclk_div7 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_FIXPLL_CTRL1,
>> + .bit_idx = 23,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div7",
>> + .ops = &clk_regmap_gate_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fclk_div7_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_fclk_div2p5_div = {
>> + .mult = 2,
>> + .div = 5,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div2p5_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fixed_pll.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fclk_div2p5 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_FIXPLL_CTRL1,
>> + .bit_idx = 25,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div2p5",
>> + .ops = &clk_regmap_gate_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fclk_div2p5_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static const struct pll_mult_range s4_gp0_pll_mult_range = {
>> + .min = 125,
>> + .max = 250,
>> +};
>> +
>> +/*
>> + * Internal gp0 pll emulation configuration parameters
>> + */
>> +static const struct reg_sequence s4_gp0_init_regs[] = {
>> + { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x00000000 },
>> + { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 },
>> + { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 },
>> + { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 },
>> + { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x39272000 },
>> + { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000 }
>> +};
>> +
>> +static struct clk_regmap s4_gp0_pll_dco = {
>> + .data = &(struct meson_clk_pll_data){
>> + .en = {
>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>> + .shift = 28,
>> + .width = 1,
>> + },
>> + .m = {
>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>> + .shift = 0,
>> + .width = 8,
>> + },
>> + .n = {
>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>> + .shift = 10,
>> + .width = 5,
>> + },
>> + .frac = {
>> + .reg_off = ANACTRL_GP0PLL_CTRL1,
>> + .shift = 0,
>> + .width = 17,
>> + },
>> + .l = {
>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>> + .shift = 31,
>> + .width = 1,
>> + },
>> + .rst = {
>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>> + .shift = 29,
>> + .width = 1,
>> + },
>> + .range = &s4_gp0_pll_mult_range,
>> + .init_regs = s4_gp0_init_regs,
>> + .init_count = ARRAY_SIZE(s4_gp0_init_regs),
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "gp0_pll_dco",
>> + .ops = &meson_clk_pll_ops,
>> + .parent_data = (const struct clk_parent_data []) {
>> + { .fw_name = "xtal", }
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_gp0_pll = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = ANACTRL_GP0PLL_CTRL0,
>> + .shift = 16,
>> + .width = 3,
>> + .flags = (CLK_DIVIDER_POWER_OF_TWO |
>> + CLK_DIVIDER_ROUND_CLOSEST),
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "gp0_pll",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_gp0_pll_dco.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +/*
>> + * Internal hifi pll emulation configuration parameters
>> + */
>> +static const struct reg_sequence s4_hifi_init_regs[] = {
>> + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x00010e56 },
>> + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 },
>> + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 },
>> + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 },
>> + { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x39272000 },
>> + { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000 }
>> +};
>> +
>> +static struct clk_regmap s4_hifi_pll_dco = {
>> + .data = &(struct meson_clk_pll_data){
>> + .en = {
>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>> + .shift = 28,
>> + .width = 1,
>> + },
>> + .m = {
>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>> + .shift = 0,
>> + .width = 8,
>> + },
>> + .n = {
>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>> + .shift = 10,
>> + .width = 5,
>> + },
>> + .frac = {
>> + .reg_off = ANACTRL_HIFIPLL_CTRL1,
>> + .shift = 0,
>> + .width = 17,
>> + },
>> + .l = {
>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>> + .shift = 31,
>> + .width = 1,
>> + },
>> + .rst = {
>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>> + .shift = 29,
>> + .width = 1,
>> + },
>> + .range = &s4_gp0_pll_mult_range,
>> + .init_regs = s4_hifi_init_regs,
>> + .init_count = ARRAY_SIZE(s4_hifi_init_regs),
>> + .flags = CLK_MESON_PLL_ROUND_CLOSEST,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "hifi_pll_dco",
>> + .ops = &meson_clk_pll_ops,
>> + .parent_data = (const struct clk_parent_data []) {
>> + { .fw_name = "xtal", }
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_hifi_pll = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = ANACTRL_HIFIPLL_CTRL0,
>> + .shift = 16,
>> + .width = 2,
>> + .flags = (CLK_DIVIDER_POWER_OF_TWO |
>> + CLK_DIVIDER_ROUND_CLOSEST),
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "hifi_pll",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_hifi_pll_dco.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_hdmi_pll_dco = {
>> + .data = &(struct meson_clk_pll_data){
>> + .en = {
>> + .reg_off = ANACTRL_HDMIPLL_CTRL0,
>> + .shift = 28,
>> + .width = 1,
>> + },
>> + .m = {
>> + .reg_off = ANACTRL_HDMIPLL_CTRL0,
>> + .shift = 0,
>> + .width = 8,
>> + },
>> + .n = {
>> + .reg_off = ANACTRL_HDMIPLL_CTRL0,
>> + .shift = 10,
>> + .width = 5,
>> + },
>> + .frac = {
>> + .reg_off = ANACTRL_HDMIPLL_CTRL1,
>> + .shift = 0,
>> + .width = 17,
>> + },
>> + .l = {
>> + .reg_off = ANACTRL_HDMIPLL_CTRL0,
>> + .shift = 31,
>> + .width = 1,
>> + },
>> + .rst = {
>> + .reg_off = ANACTRL_HDMIPLL_CTRL0,
>> + .shift = 29,
>> + .width = 1,
>> + },
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "hdmi_pll_dco",
>> + .ops = &meson_clk_pll_ro_ops,
>> + .parent_data = (const struct clk_parent_data []) {
>> + { .fw_name = "xtal", }
>> + },
>> + .num_parents = 1,
>> + /*
>> + * Display directly handle hdmi pll registers ATM, we need
>> + * NOCACHE to keep our view of the clock as accurate as
>> + * possible
>> + */
>
> Is it really ?
>
> Given that HDMI support for the s4 is there yet, the
> addresses have changes and the region is no longer a syscon, it is time
> for the HDMI driver to get fixed.
>
>> + .flags = CLK_GET_RATE_NOCACHE,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_hdmi_pll_od = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = ANACTRL_HDMIPLL_CTRL0,
>> + .shift = 16,
>> + .width = 4,
>> + .flags = CLK_DIVIDER_POWER_OF_TWO,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "hdmi_pll_od",
>> + .ops = &clk_regmap_divider_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_hdmi_pll_dco.hw
>> + },
>> + .num_parents = 1,
>> + /*
>> + * Display directly handle hdmi pll registers ATM, we need
>> + * NOCACHE to keep our view of the clock as accurate as
>> + * possible
>> + */
>> + .flags = CLK_GET_RATE_NOCACHE | CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_hdmi_pll = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = ANACTRL_HDMIPLL_CTRL0,
>> + .shift = 20,
>> + .width = 2,
>> + .flags = CLK_DIVIDER_POWER_OF_TWO,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "hdmi_pll",
>> + .ops = &clk_regmap_divider_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_hdmi_pll_od.hw
>> + },
>> + .num_parents = 1,
>> + /*
>> + * Display directly handle hdmi pll registers ATM, we need
>> + * NOCACHE to keep our view of the clock as accurate as
>> + * possible
>> + */
>> + .flags = CLK_GET_RATE_NOCACHE | CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_mpll_50m_div = {
>> + .mult = 1,
>> + .div = 80,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mpll_50m_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fixed_pll_dco.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_mpll_50m = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = ANACTRL_FIXPLL_CTRL3,
>> + .mask = 0x1,
>> + .shift = 5,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mpll_50m",
>> + .ops = &clk_regmap_mux_ro_ops,
>> + .parent_data = (const struct clk_parent_data []) {
>> + { .fw_name = "xtal", },
>> + { .hw = &s4_mpll_50m_div.hw },
>> + },
>> + .num_parents = 2,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_mpll_prediv = {
>> + .mult = 1,
>> + .div = 2,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mpll_prediv",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fixed_pll_dco.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static const struct reg_sequence s4_mpll0_init_regs[] = {
>> + { .reg = ANACTRL_MPLL_CTRL2, .def = 0x40000033 }
>> +};
>> +
>> +static struct clk_regmap s4_mpll0_div = {
>> + .data = &(struct meson_clk_mpll_data){
>> + .sdm = {
>> + .reg_off = ANACTRL_MPLL_CTRL1,
>> + .shift = 0,
>> + .width = 14,
>> + },
>> + .sdm_en = {
>> + .reg_off = ANACTRL_MPLL_CTRL1,
>> + .shift = 30,
>> + .width = 1,
>> + },
>> + .n2 = {
>> + .reg_off = ANACTRL_MPLL_CTRL1,
>> + .shift = 20,
>> + .width = 9,
>> + },
>> + .ssen = {
>> + .reg_off = ANACTRL_MPLL_CTRL1,
>> + .shift = 29,
>> + .width = 1,
>> + },
>> + .lock = &meson_clk_lock,
>> + .init_regs = s4_mpll0_init_regs,
>> + .init_count = ARRAY_SIZE(s4_mpll0_init_regs),
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mpll0_div",
>> + .ops = &meson_clk_mpll_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_mpll_prediv.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_mpll0 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_MPLL_CTRL1,
>> + .bit_idx = 31,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mpll0",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_mpll0_div.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static const struct reg_sequence s4_mpll1_init_regs[] = {
>> + { .reg = ANACTRL_MPLL_CTRL4, .def = 0x40000033 }
>> +};
>> +
>> +static struct clk_regmap s4_mpll1_div = {
>> + .data = &(struct meson_clk_mpll_data){
>> + .sdm = {
>> + .reg_off = ANACTRL_MPLL_CTRL3,
>> + .shift = 0,
>> + .width = 14,
>> + },
>> + .sdm_en = {
>> + .reg_off = ANACTRL_MPLL_CTRL3,
>> + .shift = 30,
>> + .width = 1,
>> + },
>> + .n2 = {
>> + .reg_off = ANACTRL_MPLL_CTRL3,
>> + .shift = 20,
>> + .width = 9,
>> + },
>> + .ssen = {
>> + .reg_off = ANACTRL_MPLL_CTRL3,
>> + .shift = 29,
>> + .width = 1,
>> + },
>> + .lock = &meson_clk_lock,
>> + .init_regs = s4_mpll1_init_regs,
>> + .init_count = ARRAY_SIZE(s4_mpll1_init_regs),
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mpll1_div",
>> + .ops = &meson_clk_mpll_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_mpll_prediv.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_mpll1 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_MPLL_CTRL3,
>> + .bit_idx = 31,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mpll1",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_mpll1_div.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static const struct reg_sequence s4_mpll2_init_regs[] = {
>> + { .reg = ANACTRL_MPLL_CTRL6, .def = 0x40000033 }
>> +};
>> +
>> +static struct clk_regmap s4_mpll2_div = {
>> + .data = &(struct meson_clk_mpll_data){
>> + .sdm = {
>> + .reg_off = ANACTRL_MPLL_CTRL5,
>> + .shift = 0,
>> + .width = 14,
>> + },
>> + .sdm_en = {
>> + .reg_off = ANACTRL_MPLL_CTRL5,
>> + .shift = 30,
>> + .width = 1,
>> + },
>> + .n2 = {
>> + .reg_off = ANACTRL_MPLL_CTRL5,
>> + .shift = 20,
>> + .width = 9,
>> + },
>> + .ssen = {
>> + .reg_off = ANACTRL_MPLL_CTRL5,
>> + .shift = 29,
>> + .width = 1,
>> + },
>> + .lock = &meson_clk_lock,
>> + .init_regs = s4_mpll2_init_regs,
>> + .init_count = ARRAY_SIZE(s4_mpll2_init_regs),
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mpll2_div",
>> + .ops = &meson_clk_mpll_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_mpll_prediv.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_mpll2 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_MPLL_CTRL5,
>> + .bit_idx = 31,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mpll2",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_mpll2_div.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static const struct reg_sequence s4_mpll3_init_regs[] = {
>> + { .reg = ANACTRL_MPLL_CTRL8, .def = 0x40000033 }
>> +};
>> +
>> +static struct clk_regmap s4_mpll3_div = {
>> + .data = &(struct meson_clk_mpll_data){
>> + .sdm = {
>> + .reg_off = ANACTRL_MPLL_CTRL7,
>> + .shift = 0,
>> + .width = 14,
>> + },
>> + .sdm_en = {
>> + .reg_off = ANACTRL_MPLL_CTRL7,
>> + .shift = 30,
>> + .width = 1,
>> + },
>> + .n2 = {
>> + .reg_off = ANACTRL_MPLL_CTRL7,
>> + .shift = 20,
>> + .width = 9,
>> + },
>> + .ssen = {
>> + .reg_off = ANACTRL_MPLL_CTRL7,
>> + .shift = 29,
>> + .width = 1,
>> + },
>> + .lock = &meson_clk_lock,
>> + .init_regs = s4_mpll3_init_regs,
>> + .init_count = ARRAY_SIZE(s4_mpll3_init_regs),
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mpll3_div",
>> + .ops = &meson_clk_mpll_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_mpll_prediv.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_mpll3 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_MPLL_CTRL7,
>> + .bit_idx = 31,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mpll3",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_mpll3_div.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +/* Array of all clocks provided by this provider */
>> +static struct clk_hw_onecell_data s4_pll_hw_onecell_data = {
>> + .hws = {
>> + [CLKID_FIXED_PLL_DCO] = &s4_fixed_pll_dco.hw,
>> + [CLKID_FIXED_PLL] = &s4_fixed_pll.hw,
>> + [CLKID_FCLK_DIV2_DIV] = &s4_fclk_div2_div.hw,
>> + [CLKID_FCLK_DIV2] = &s4_fclk_div2.hw,
>> + [CLKID_FCLK_DIV3_DIV] = &s4_fclk_div3_div.hw,
>> + [CLKID_FCLK_DIV3] = &s4_fclk_div3.hw,
>> + [CLKID_FCLK_DIV4_DIV] = &s4_fclk_div4_div.hw,
>> + [CLKID_FCLK_DIV4] = &s4_fclk_div4.hw,
>> + [CLKID_FCLK_DIV5_DIV] = &s4_fclk_div5_div.hw,
>> + [CLKID_FCLK_DIV5] = &s4_fclk_div5.hw,
>> + [CLKID_FCLK_DIV7_DIV] = &s4_fclk_div7_div.hw,
>> + [CLKID_FCLK_DIV7] = &s4_fclk_div7.hw,
>> + [CLKID_FCLK_DIV2P5_DIV] = &s4_fclk_div2p5_div.hw,
>> + [CLKID_FCLK_DIV2P5] = &s4_fclk_div2p5.hw,
>> + [CLKID_GP0_PLL_DCO] = &s4_gp0_pll_dco.hw,
>> + [CLKID_GP0_PLL] = &s4_gp0_pll.hw,
>> + [CLKID_HIFI_PLL_DCO] = &s4_hifi_pll_dco.hw,
>> + [CLKID_HIFI_PLL] = &s4_hifi_pll.hw,
>> + [CLKID_HDMI_PLL_DCO] = &s4_hdmi_pll_dco.hw,
>> + [CLKID_HDMI_PLL_OD] = &s4_hdmi_pll_od.hw,
>> + [CLKID_HDMI_PLL] = &s4_hdmi_pll.hw,
>> + [CLKID_MPLL_50M_DIV] = &s4_mpll_50m_div.hw,
>> + [CLKID_MPLL_50M] = &s4_mpll_50m.hw,
>> + [CLKID_MPLL_PREDIV] = &s4_mpll_prediv.hw,
>> + [CLKID_MPLL0_DIV] = &s4_mpll0_div.hw,
>> + [CLKID_MPLL0] = &s4_mpll0.hw,
>> + [CLKID_MPLL1_DIV] = &s4_mpll1_div.hw,
>> + [CLKID_MPLL1] = &s4_mpll1.hw,
>> + [CLKID_MPLL2_DIV] = &s4_mpll2_div.hw,
>> + [CLKID_MPLL2] = &s4_mpll2.hw,
>> + [CLKID_MPLL3_DIV] = &s4_mpll3_div.hw,
>> + [CLKID_MPLL3] = &s4_mpll3.hw,
>> +
>> + [NR_PLL_CLKS] = NULL
>> + },
>> + .num = NR_PLL_CLKS,
>> +};
>> +
>> +static struct clk_regmap *const s4_pll_clk_regmaps[] = {
>> + &s4_fixed_pll_dco,
>> + &s4_fixed_pll,
>> + &s4_fclk_div2,
>> + &s4_fclk_div3,
>> + &s4_fclk_div4,
>> + &s4_fclk_div5,
>> + &s4_fclk_div7,
>> + &s4_fclk_div2p5,
>> + &s4_gp0_pll_dco,
>> + &s4_gp0_pll,
>> + &s4_hifi_pll_dco,
>> + &s4_hifi_pll,
>> + &s4_hdmi_pll_dco,
>> + &s4_hdmi_pll_od,
>> + &s4_hdmi_pll,
>> + &s4_mpll_50m,
>> + &s4_mpll0_div,
>> + &s4_mpll0,
>> + &s4_mpll1_div,
>> + &s4_mpll1,
>> + &s4_mpll2_div,
>> + &s4_mpll2,
>> + &s4_mpll3_div,
>> + &s4_mpll3,
>> +};
>> +
>> +static const struct reg_sequence s4_init_regs[] = {
>> + { .reg = ANACTRL_MPLL_CTRL0, .def = 0x00000543 },
>> +};
>> +
>> +static struct regmap_config clkc_regmap_config = {
>> + .reg_bits = 32,
>> + .val_bits = 32,
>> + .reg_stride = 4,
>> +};
>> +
>> +static int meson_s4_pll_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct regmap *regmap;
>> + void __iomem *base;
>> + int ret, i;
>> +
>> + base = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(base))
>> + return PTR_ERR(base);
>> +
>> + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
>> + if (IS_ERR(regmap))
>> + return PTR_ERR(regmap);
>> +
>> + ret = regmap_multi_reg_write(regmap, s4_init_regs, ARRAY_SIZE(s4_init_regs));
>> + if (ret) {
>> + dev_err(dev, "Failed to init registers\n");
>> + return ret;
>> + }
>> +
>> + /* Populate regmap for the regmap backed clocks */
>> + for (i = 0; i < ARRAY_SIZE(s4_pll_clk_regmaps); i++)
>> + s4_pll_clk_regmaps[i]->map = regmap;
>> +
>> + for (i = 0; i < s4_pll_hw_onecell_data.num; i++) {
>> + /* array might be sparse */
>> + if (!s4_pll_hw_onecell_data.hws[i])
>> + continue;
>> +
>> + ret = devm_clk_hw_register(dev, s4_pll_hw_onecell_data.hws[i]);
>> + if (ret) {
>> + dev_err(dev, "Clock registration failed\n");
>> + return ret;
>> + }
>> + }
>> +
>> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
>> + &s4_pll_hw_onecell_data);
>> +}
>> +
>> +static const struct of_device_id clkc_match_table[] = {
>> + {
>> + .compatible = "amlogic,s4-pll-clkc",
>> + },
>> + {}
>> +};
>> +
>> +static struct platform_driver s4_driver = {
>> + .probe = meson_s4_pll_probe,
>> + .driver = {
>> + .name = "s4-pll-clkc",
>> + .of_match_table = clkc_match_table,
>> + },
>> +};
>> +
>> +module_platform_driver(s4_driver);
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/clk/meson/s4-pll.h b/drivers/clk/meson/s4-pll.h
>> new file mode 100644
>> index 000000000000..41dc6de978c1
>> --- /dev/null
>> +++ b/drivers/clk/meson/s4-pll.h
>> @@ -0,0 +1,88 @@
>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
>> +/*
>> + * Copyright (c) 2021 Amlogic, inc.
>> + * Author: Yu Tu <yu.tu at amlogic.com>
>> + */
>> +
>> +#ifndef __MESON_S4_PLL_H__
>> +#define __MESON_S4_PLL_H__
>> +
>> +/* ANA_CTRL - Registers
>> + * REG_BASE: REGISTER_BASE_ADDR = 0xfe008000
>> + */
>> +#define ANACTRL_FIXPLL_CTRL0 (0x0010 << 2)
>
> I already commented on the "<< 2" . Remove them please.
Sorry, maybe I didn't pay attention to this comment earlier. A little
bit of a question why is this not okay? I understand isn't it better for
the compiler to help with this calculation itself?
>
>> +#define ANACTRL_FIXPLL_CTRL1 (0x0011 << 2)
>> +#define ANACTRL_FIXPLL_CTRL2 (0x0012 << 2)
>> +#define ANACTRL_FIXPLL_CTRL3 (0x0013 << 2)
>> +#define ANACTRL_FIXPLL_CTRL4 (0x0014 << 2)
>> +#define ANACTRL_FIXPLL_CTRL5 (0x0015 << 2)
>> +#define ANACTRL_FIXPLL_CTRL6 (0x0016 << 2)
>> +#define ANACTRL_FIXPLL_STS (0x0017 << 2)
>> +#define ANACTRL_GP0PLL_CTRL0 (0x0020 << 2)
>> +#define ANACTRL_GP0PLL_CTRL1 (0x0021 << 2)
>> +#define ANACTRL_GP0PLL_CTRL2 (0x0022 << 2)
>> +#define ANACTRL_GP0PLL_CTRL3 (0x0023 << 2)
>> +#define ANACTRL_GP0PLL_CTRL4 (0x0024 << 2)
>> +#define ANACTRL_GP0PLL_CTRL5 (0x0025 << 2)
>> +#define ANACTRL_GP0PLL_CTRL6 (0x0026 << 2)
>> +#define ANACTRL_GP0PLL_STS (0x0027 << 2)
>> +#define ANACTRL_HIFIPLL_CTRL0 (0x0040 << 2)
>> +#define ANACTRL_HIFIPLL_CTRL1 (0x0041 << 2)
>> +#define ANACTRL_HIFIPLL_CTRL2 (0x0042 << 2)
>> +#define ANACTRL_HIFIPLL_CTRL3 (0x0043 << 2)
>> +#define ANACTRL_HIFIPLL_CTRL4 (0x0044 << 2)
>> +#define ANACTRL_HIFIPLL_CTRL5 (0x0045 << 2)
>> +#define ANACTRL_HIFIPLL_CTRL6 (0x0046 << 2)
>> +#define ANACTRL_HIFIPLL_STS (0x0047 << 2)
>> +#define ANACTRL_MPLL_CTRL0 (0x0060 << 2)
>> +#define ANACTRL_MPLL_CTRL1 (0x0061 << 2)
>> +#define ANACTRL_MPLL_CTRL2 (0x0062 << 2)
>> +#define ANACTRL_MPLL_CTRL3 (0x0063 << 2)
>> +#define ANACTRL_MPLL_CTRL4 (0x0064 << 2)
>> +#define ANACTRL_MPLL_CTRL5 (0x0065 << 2)
>> +#define ANACTRL_MPLL_CTRL6 (0x0066 << 2)
>> +#define ANACTRL_MPLL_CTRL7 (0x0067 << 2)
>> +#define ANACTRL_MPLL_CTRL8 (0x0068 << 2)
>> +#define ANACTRL_MPLL_STS (0x0069 << 2)
>> +#define ANACTRL_HDMIPLL_CTRL0 (0x0070 << 2)
>> +#define ANACTRL_HDMIPLL_CTRL1 (0x0071 << 2)
>> +#define ANACTRL_HDMIPLL_CTRL2 (0x0072 << 2)
>> +#define ANACTRL_HDMIPLL_CTRL3 (0x0073 << 2)
>> +#define ANACTRL_HDMIPLL_CTRL4 (0x0074 << 2)
>> +#define ANACTRL_HDMIPLL_CTRL5 (0x0075 << 2)
>> +#define ANACTRL_HDMIPLL_CTRL6 (0x0076 << 2)
>> +#define ANACTRL_HDMIPLL_STS (0x0077 << 2)
>> +#define ANACTRL_HDMIPLL_VLOCK (0x0079 << 2)
>> +
>> +/*
>> + * CLKID index values
>> + *
>> + * These indices are entirely contrived and do not map onto the hardware.
>> + * It has now been decided to expose everything by default in the DT header:
>> + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
>> + * to expose, such as the internal muxes and dividers of composite clocks,
>> + * will remain defined here.
>> + */
>> +#define CLKID_FIXED_PLL_DCO 0
>> +#define CLKID_FCLK_DIV2_DIV 2
>> +#define CLKID_FCLK_DIV3_DIV 4
>> +#define CLKID_FCLK_DIV4_DIV 6
>> +#define CLKID_FCLK_DIV5_DIV 8
>> +#define CLKID_FCLK_DIV7_DIV 10
>> +#define CLKID_FCLK_DIV2P5_DIV 12
>> +#define CLKID_GP0_PLL_DCO 14
>> +#define CLKID_HIFI_PLL_DCO 16
>> +#define CLKID_HDMI_PLL_DCO 18
>> +#define CLKID_HDMI_PLL_OD 19
>> +#define CLKID_MPLL_50M_DIV 21
>> +#define CLKID_MPLL_PREDIV 23
>> +#define CLKID_MPLL0_DIV 24
>> +#define CLKID_MPLL1_DIV 26
>> +#define CLKID_MPLL2_DIV 28
>> +#define CLKID_MPLL3_DIV 30
>> +
>> +#define NR_PLL_CLKS 32
>> +/* include the CLKIDs that have been made part of the DT binding */
>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
>> +
>> +#endif /* __MESON_S4_PLL_H__ */
>
> .
More information about the linux-amlogic
mailing list