[PATCH V3 2/6] arm64: dts: meson: add S4 Soc PLL clock controller in DT
Jerome Brunet
jbrunet at baylibre.com
Wed Aug 10 06:32:08 PDT 2022
On Fri 05 Aug 2022 at 17:39, Yu Tu <yu.tu at amlogic.com> wrote:
> Hi Krzysztof,
> Thank you for your reply.
>
> On 2022/8/5 17:16, Krzysztof Kozlowski wrote:
>> [ EXTERNAL EMAIL ]
>> On 05/08/2022 10:57, Yu Tu wrote:
>>> Added information about the S4 SOC PLL Clock controller in DT.
>>>
>>> Signed-off-by: Yu Tu <yu.tu at amlogic.com>
>>> ---
>>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 8 ++++++++
>>> 1 file changed, 8 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>>> index ff213618a598..a816b1f7694b 100644
>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>>> @@ -92,6 +92,14 @@ apb4: apb4 at fe000000 {
>>> #size-cells = <2>;
>>> ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>>> + clkc_pll: pll-clock-controller at 8000 {
>> Node names should be generic - clock-controller.
>> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>>
> I will change to clkc_pll: clock-controller at 8000, in next version.
Same comment applies to the binding doc.
Also it would be nice to split this in two series.
Bindings and drivers in one, arm64 dt in the other. These changes goes
in through different trees.
>> Best regards,
>> Krzysztof
>> .
More information about the linux-amlogic
mailing list