[PATCH V3 5/6] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT

[Yu Tu]

Hi Krzysztof,
     Thank you for your reply.

On 2022/8/5 17:16, Krzysztof Kozlowski wrote:
> [ EXTERNAL EMAIL ]
> 
> On 05/08/2022 10:57, Yu Tu wrote:
>> Added information about the S4 SOC Peripheral Clock controller in DT.
>>
>> Signed-off-by: Yu Tu <yu.tu at amlogic.com>
>> ---
>>   arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++
>>   1 file changed, 26 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>> index a816b1f7694b..71be1dda15a2 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>> @@ -6,6 +6,8 @@
>>   #include <dt-bindings/interrupt-controller/irq.h>
>>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>>   #include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
>> +#include <dt-bindings/clock/amlogic,s4-clkc.h>
>>   
>>   / {
>>   	cpus {
>> @@ -100,6 +102,30 @@ clkc_pll: pll-clock-controller at 8000 {
>>   				#clock-cells = <1>;
>>   			};
>>   
>> +			clkc_periphs: periphs-clock-controller {
> 
> Node names should be generic, so "clock-controller"
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> 
> You miss here unit address. Test your DTS with dtbs check and with
> regular compile with W=1.
I will change to clkc_periphs: clock-controller at 0 {.
Is that okay?
> 
> 
> Best regards,
> Krzysztof
> 
> .