[PATCH v2] mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk
Neil Armstrong
narmstrong at baylibre.com
Tue Sep 28 00:36:52 PDT 2021
The memory at the end of the controller only accepts 32bit read/write
accesses, but the arm64 memcpy_to/fromio implementation only uses 64bit
(which will be split into two 32bit access) and 8bit leading to incomplete
copies to/from this memory when the buffer is not multiple of 8bytes.
Add a local copy using writel/readl accesses to make sure we use the right
memory access width.
The switch to memcpy_to/fromio was done because of 285133040e6c
("arm64: Import latest memcpy()/memmove() implementation"), but using memcpy
worked before since it mainly used 32bit memory acceses.
Fixes: 103a5348c22c ("mmc: meson-gx: use memcpy_to/fromio for dram-access-quirk")
Reported-by: Christian Hewitt <christianshewitt at gmail.com>
Suggested-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
Changes since v1:
- added sg pre-validation at meson_mmc_request and dropped checks in meson_mmc_copy_buffer
drivers/mmc/host/meson-gx-mmc.c | 73 ++++++++++++++++++++++++++-------
1 file changed, 59 insertions(+), 14 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 3f28eb4d17fe..8f36536cb1b6 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -746,7 +746,7 @@ static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg)
writel(start, host->regs + SD_EMMC_START);
}
-/* local sg copy to buffer version with _to/fromio usage for dram_access_quirk */
+/* local sg copy for dram_access_quirk */
static void meson_mmc_copy_buffer(struct meson_host *host, struct mmc_data *data,
size_t buflen, bool to_buffer)
{
@@ -764,21 +764,27 @@ static void meson_mmc_copy_buffer(struct meson_host *host, struct mmc_data *data
sg_miter_start(&miter, sgl, nents, sg_flags);
while ((offset < buflen) && sg_miter_next(&miter)) {
- unsigned int len;
+ unsigned int buf_offset = 0;
+ unsigned int len, left;
+ u32 *buf = miter.addr;
len = min(miter.length, buflen - offset);
+ left = len;
- /* When dram_access_quirk, the bounce buffer is a iomem mapping */
- if (host->dram_access_quirk) {
- if (to_buffer)
- memcpy_toio(host->bounce_iomem_buf + offset, miter.addr, len);
- else
- memcpy_fromio(miter.addr, host->bounce_iomem_buf + offset, len);
+ if (to_buffer) {
+ do {
+ writel(*buf++, host->bounce_iomem_buf + offset + buf_offset);
+
+ buf_offset += 4;
+ left -= 4;
+ } while (left);
} else {
- if (to_buffer)
- memcpy(host->bounce_buf + offset, miter.addr, len);
- else
- memcpy(miter.addr, host->bounce_buf + offset, len);
+ do {
+ *buf++ = readl(host->bounce_iomem_buf + offset + buf_offset);
+
+ buf_offset += 4;
+ left -= 4;
+ } while (left);
}
offset += len;
@@ -830,7 +836,11 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
if (data->flags & MMC_DATA_WRITE) {
cmd_cfg |= CMD_CFG_DATA_WR;
WARN_ON(xfer_bytes > host->bounce_buf_size);
- meson_mmc_copy_buffer(host, data, xfer_bytes, true);
+ if (host->dram_access_quirk)
+ meson_mmc_copy_buffer(host, data, xfer_bytes, true);
+ else
+ sg_copy_to_buffer(data->sg, data->sg_len,
+ host->bounce_buf, xfer_bytes);
dma_wmb();
}
@@ -849,12 +859,43 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
}
+static int meson_mmc_validate_dram_access(struct mmc_host *mmc, struct mmc_data *data)
+{
+ struct scatterlist *sg;
+ int i;
+
+ /* Reject request if any element offset or size is not 32bit aligned */
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (!IS_ALIGNED(sg->offset, sizeof(u32)) ||
+ !IS_ALIGNED(sg->length, sizeof(u32))) {
+ dev_err(mmc_dev(mmc), "unaligned sg offset %u len %u\n",
+ data->sg->offset, data->sg->length);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct meson_host *host = mmc_priv(mmc);
bool needs_pre_post_req = mrq->data &&
!(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE);
+ /*
+ * The memory at the end of the controller used as bounce buffer for
+ * the dram_access_quirk only accepts 32bit read/write access,
+ * check the aligment and length of the data before starting the request.
+ */
+ if (host->dram_access_quirk && mrq->data) {
+ mrq->cmd->error = meson_mmc_validate_dram_access(mmc, mrq->data);
+ if (mrq->cmd->error) {
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+ }
+
if (needs_pre_post_req) {
meson_mmc_get_transfer_mode(mmc, mrq);
if (!meson_mmc_desc_chain_mode(mrq->data))
@@ -999,7 +1040,11 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
if (meson_mmc_bounce_buf_read(data)) {
xfer_bytes = data->blksz * data->blocks;
WARN_ON(xfer_bytes > host->bounce_buf_size);
- meson_mmc_copy_buffer(host, data, xfer_bytes, false);
+ if (host->dram_access_quirk)
+ meson_mmc_copy_buffer(host, data, xfer_bytes, false);
+ else
+ sg_copy_from_buffer(data->sg, data->sg_len,
+ host->bounce_buf, xfer_bytes);
}
next_cmd = meson_mmc_get_next_command(cmd);
--
2.25.1
More information about the linux-amlogic
mailing list