[PATCH v2 2/3] clk: divider: Switch from .round_rate to .determine_rate by default
Martin Blumenstingl
martin.blumenstingl at googlemail.com
Mon May 24 03:37:32 PDT 2021
.determine_rate is meant to replace .round_rate. The former comes with a
benefit which is especially relevant on 32-bit systems: since
.determine_rate uses an "unsigned long" (compared to a "signed long"
which is used by .round_rate) the maximum value on 32-bit systems
increases from 2^31 (or approx. 2.14GHz) to 2^32 (or approx. 4.29GHz).
Switch to a .determine_rate implementation by default so 32-bit systems
can benefit from the increased maximum value as well as so we have one
fewer user of .round_rate.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
drivers/clk/clk-divider.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 87ba4966b0e8..9e05e81116af 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -425,8 +425,8 @@ long divider_ro_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
}
EXPORT_SYMBOL_GPL(divider_ro_round_rate_parent);
-static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
+static int clk_divider_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk_divider *divider = to_clk_divider(hw);
@@ -437,13 +437,13 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
val = clk_div_readl(divider) >> divider->shift;
val &= clk_div_mask(divider->width);
- return divider_ro_round_rate(hw, rate, prate, divider->table,
- divider->width, divider->flags,
- val);
+ return divider_ro_determine_rate(hw, req, divider->table,
+ divider->width,
+ divider->flags, val);
}
- return divider_round_rate(hw, rate, prate, divider->table,
- divider->width, divider->flags);
+ return divider_determine_rate(hw, req, divider->table, divider->width,
+ divider->flags);
}
int divider_get_val(unsigned long rate, unsigned long parent_rate,
@@ -500,14 +500,14 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
const struct clk_ops clk_divider_ops = {
.recalc_rate = clk_divider_recalc_rate,
- .round_rate = clk_divider_round_rate,
+ .determine_rate = clk_divider_determine_rate,
.set_rate = clk_divider_set_rate,
};
EXPORT_SYMBOL_GPL(clk_divider_ops);
const struct clk_ops clk_divider_ro_ops = {
.recalc_rate = clk_divider_recalc_rate,
- .round_rate = clk_divider_round_rate,
+ .determine_rate = clk_divider_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_divider_ro_ops);
--
2.31.1
More information about the linux-amlogic
mailing list