[PATCH] usb: dwc3: meson-g12a: Disable the regulator in the error handling path of the probe

Christophe JAILLET christophe.jaillet at wanadoo.fr
Fri May 21 09:55:50 PDT 2021


If an error occurs after a successful 'regulator_enable()' call,
'regulator_disable()' must be called.

Fix the error handling path of the probe accordingly.

The remove function doesn't need to be fixed, because the
'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()'
which is called via 'pm_runtime_set_suspended()' in the remove function.

Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Signed-off-by: Christophe JAILLET <christophe.jaillet at wanadoo.fr>
---
Please review carefully.

I'm not that sure about:
   The remove function doesn't need to be fixed, because the
   'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()'
   which is called via 'pm_runtime_set_suspended()' in the remove function.

This is more a guess than anything else!
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index bdf1f98dfad8..804957525130 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -772,13 +772,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 
 	ret = priv->drvdata->usb_init(priv);
 	if (ret)
-		goto err_disable_clks;
+		goto err_disable_regulator;
 
 	/* Init PHYs */
 	for (i = 0 ; i < PHY_COUNT ; ++i) {
 		ret = phy_init(priv->phys[i]);
 		if (ret)
-			goto err_disable_clks;
+			goto err_disable_regulator;
 	}
 
 	/* Set PHY Power */
@@ -816,6 +816,10 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	for (i = 0 ; i < PHY_COUNT ; ++i)
 		phy_exit(priv->phys[i]);
 
+err_disable_regulator:
+	if (priv->vbus)
+		regulator_disable(priv->vbus);
+
 err_disable_clks:
 	clk_bulk_disable_unprepare(priv->drvdata->num_clks,
 				   priv->drvdata->clks);
-- 
2.30.2




More information about the linux-amlogic mailing list