[PATCHv1 3/9] soc: amlogic: meson-ee-pwrc: Add hdmi power domain Meson g12a SoCs

[Martin Blumenstingl]

Hi Anand,

On Mon, May 3, 2021 at 5:29 PM Anand Moon <linux.amoon at gmail.com> wrote:
[...]
> > > +static struct meson_ee_pwrc_mem_domain meson_pwrc_mem_hdmi[] = {
> > > +       { HHI_MEM_PD_REG0, GENMASK(15, 8) },
> > > +};
> > > +
> > the VPU power domain already includes:
> >   VPU_HHI_MEMPD(HHI_MEM_PD_REG0),
> > whereas VPU_HHI_MEMPD is bits[15:8]
> >
> > Having two power domains which are managing the same registers sounds
> > like it'll be causing some trouble
> > So for now this is (as I am not even sure what the goal here is):
> > NACKed-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> >
>
> Ok, thanks. On the line of Ethernet PD, I tried to add this accordingly.
>From what I understand the VPU power domain is special because the
display pipeline consists of multiple components (HDMI, VPU, ...)
that's why the handling currently is special

> whenever I try something new it fails. Please ignore this series.
if the VPU and HDMI power domains were separate (from hardware
perspective, not from driver perspective) then your change is a good
step forward.
in that case VPU_HHI_MEMPD would need to be removed from wherever it's
currently used -> that means we need to also decide if we want to
break compatibility with older (before this series) .dtbs


Best regards,
Martin