[PATCHv1 1/6] dt-bindings: net: ethernet-phy: Fix the parsing of ethernet-phy compatible string

Anand Moon linux.amoon at gmail.com
Thu Mar 25 13:33:28 GMT 2021


Hi Andrew,

On Thu, 25 Mar 2021 at 18:27, Andrew Lunn <andrew at lunn.ch> wrote:
>
> On Thu, Mar 25, 2021 at 12:42:20PM +0000, Anand Moon wrote:
> > Fix the parsing of check of pattern ethernet-phy-ieee802.3 used
> > by the device tree to initialize the mdio phy.
> >
> > As per the of_mdio below 2 are valid compatible string
> >       "ethernet-phy-ieee802.3-c22"
> >       "ethernet-phy-ieee802.3-c45"
>
> Nope, this is not the full story. Yes, you can have these compatible
> strings. But you can also use the PHY ID,
> e.g. ethernet-phy-idAAAA.BBBB, where AAAA and BBBB are what you find in
> registers 2 and 3 of the PHY.
>

Oops I did not read the drivers/net/mdio/of_mdio.c completely.
Thanks for letting me know so in the next series,
I will try to add the below compatible string as per the description in the dts.

               compatible = "ethernet-phy-id001c.c916",
                            "ethernet-phy-ieee802.3-c22";

> > Cc: Rob Herring <robh at kernel.org>
> > Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> > ---
> >  Documentation/devicetree/bindings/net/ethernet-phy.yaml | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> > index 2766fe45bb98..cfc7909d3e56 100644
> > --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> > +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> > @@ -33,7 +33,7 @@ properties:
> >          description: PHYs that implement IEEE802.3 clause 22
> >        - const: ethernet-phy-ieee802.3-c45
> >          description: PHYs that implement IEEE802.3 clause 45
> > -      - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
> > +      - pattern: "^ethernet-phy-ieee[0-9]{3}\\.[0-9][-][a-f0-9]{4}$"
>
> So here you need, in addition to, not instead of.
>
> Please test you change on for example imx6ul-14x14-evk.dtsi
>

Yes I have gone through the test case.

>    Andrew

- Anand



More information about the linux-amlogic mailing list