[PATCH 0/2] phy: Add support for the HDMI TX PHY on Meson8/8b/8m2
Martin Blumenstingl
martin.blumenstingl at googlemail.com
Fri Jun 4 12:03:36 PDT 2021
Amlogic Meson8/8b/8m2 SoCs embed a HDMI TX PHY. Unfortunately there is
no (public) documentation for this hardware. The best thing we have is
the 3.10 vendor kernel, which unfortunately doesn't document most
register bits (only a few are named there, the rest is all magic
numbers).
It is possible that this is a TranSwitch HDMI TX PHY based core, but
this is pure speculation.
Adding a driver for the HDMI TX PHY gets us one step closer to video
output on these older SoCs.
Martin Blumenstingl (2):
dt-bindings: phy: Add the Amlogic Meson8 HDMI TX PHY bindings
phy: amlogic: Add a new driver for the HDMI TX PHY on Meson8/8b/8m2
.../phy/amlogic,meson8-hdmi-tx-phy.yaml | 51 ++++++
drivers/phy/amlogic/Kconfig | 11 ++
drivers/phy/amlogic/Makefile | 1 +
drivers/phy/amlogic/phy-meson8-hdmi-tx.c | 150 ++++++++++++++++++
4 files changed, 213 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml
create mode 100644 drivers/phy/amlogic/phy-meson8-hdmi-tx.c
--
2.31.1
More information about the linux-amlogic
mailing list