[PATCH] usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled

Martin Blumenstingl martin.blumenstingl at googlemail.com
Thu Jun 3 11:20:30 PDT 2021


On Tue, Jun 1, 2021 at 10:49 AM Neil Armstrong <narmstrong at baylibre.com> wrote:
>
> When only PHY1 is used (for example on Odroid-HC4), the regmap init code
> uses the usb2 ports when doesn't initialize the PHY1 regmap entry.
>
> This fixes:
> Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
> ...
> pc : regmap_update_bits_base+0x40/0xa0
> lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
> ...
> Call trace:
> regmap_update_bits_base+0x40/0xa0
> dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
> dwc3_meson_g12a_usb2_init+0x7c/0xc8
> dwc3_meson_g12a_usb_init+0x28/0x48
> dwc3_meson_g12a_probe+0x298/0x540
> platform_probe+0x70/0xe0
> really_probe+0xf0/0x4d8
> driver_probe_device+0xfc/0x168
> ...
>
> Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately")
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>



More information about the linux-amlogic mailing list