[PATCH 3/6] arm64: dts: meson-sm1-odroid-c4: fix hub_5v regulator gpio

[Martin Blumenstingl]

Hi Neil,

On Tue, Jun 1, 2021 at 11:01 AM Neil Armstrong <narmstrong at baylibre.com> wrote:
>
> As described in the Odroid-C4 schematics, the HUB_5V regulator is controlled
> by GPIOH_8 and in Open Drain since this GPIO doesn't support Push-Pull.
>
> Fixes: 326e57518b0d ("arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4")
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
my interpretation of page 32 of the schematics [0] is that GPIOH_8 manages VCC5V
GPIOH_4 is connected as RST_N to the RESET# pad of the USB hub -> this
seems to match the original regulator definition


[0] https://wiki.odroid.com/_media/odroid-c4/odroid-c4_rev1.0.pdf