[PATCHv1 2/3] ARM: dts: meson: Use new reset id for reset controller

[Anand Moon]

Hi Philipp,

Thanks for your review comments.

On Fri, 30 Jul 2021 at 15:16, Philipp Zabel <p.zabel at pengutronix.de> wrote:
>
> On Fri, 2021-07-30 at 01:40 +0530, Anand Moon wrote:
> > Used new reset id for reset controller as it conflict
> > with the core reset id.
> >
> > Fixes: b96446541d83 ("ARM: dts: meson8b: extend ethernet controller description")
> >
> > Cc: Jerome Brunet <jbrunet at baylibre.com>
> > Cc: Neil Armstrong <narmstrong at baylibre.com>
> > Cc: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> > Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> > ---
> >  arch/arm/boot/dts/meson8b.dtsi  | 2 +-
> >  arch/arm/boot/dts/meson8m2.dtsi | 2 +-
> >  2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
> > index c02b03cbcdf4..cb3a579d09ef 100644
> > --- a/arch/arm/boot/dts/meson8b.dtsi
> > +++ b/arch/arm/boot/dts/meson8b.dtsi
> > @@ -511,7 +511,7 @@ &ethmac {
> >       tx-fifo-depth = <2048>;
> >
> >       resets = <&reset RESET_ETHERNET>;
> > -     reset-names = "stmmaceth";
> > +     reset-names = "ethreset";
>
> This looks like an incompatible change. Is the "stmmaceth" reset not
> used? It is documented as "MAC reset signal" in [1]. So a PHY reset
> should be separate from this.
>
> [1] Documentation/devicetree/bindings/net/snps,dwmac.yaml
>
>From the above device tree binding is been used below.
  reset-names:
    const: stmmaceth

While testing new reset driver changes I was getting conflict with
reset id, see the below links
hence I opted for a new reset-names = "ethreset".

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/stmicro/stmmac/stmmac.h?h=v5.14-rc3#n12
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c?h=v5.14-rc3#n598

> regards
> Philipp

Thanks

-Anand