[PATCH v2] PCI: DWC: meson: add 256 bytes MRRS quirk

[Art Nikpal]

> This needs to say whether this is a functional or a performance issue.

Looks like not a performance issue , this is a functional issue.

We detect just one problem(may be exist another i dont know ) for
writing(reading works fine) any data to NVME devices with MRRS != 256
we have scrambled HDMI display

> Does this problem actually affect *all* DesignWare-based controllers?
> So why is this limited to PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3?

i can say only for VIM3 device which use this controller and have this problem

On Wed, Jul 28, 2021 at 3:43 AM Bjorn Helgaas <helgaas at kernel.org> wrote:
>
> On Tue, Jul 27, 2021 at 10:30:00AM +0800, Artem Lapkin wrote:
> > 256 bytes maximum read request size. They can't handle
> > anything larger than this. So force this limit on
> > any devices attached under these ports.
>
> This needs to say whether this is a functional or a performance issue.
>
> If it's a functional issue, i.e., if meson signals an error or abort
> when it receives a read request for > 256 bytes, we need to explain
> exactly what happens.
>
> If it's a performance issue, we need to explain why MRRS affects
> performance and that this is an optimization.
>
> > Come-from: https://lkml.org/lkml/2021/6/18/160
> > Come-from: https://lkml.org/lkml/2021/6/19/19
>
> Please use lore.kernel.org URLs instead.  The lore URLs are a little
> uglier, but are more functional, more likely to continue working, and
> avoid the ads.  These are:
>
>   https://lore.kernel.org/r/20210618230132.GA3228427@bjorn-Precision-5520
>   https://lore.kernel.org/r/20210619063952.2008746-1-art@khadas.com
>
> > It only affects PCIe in P2P, in non-P2P is will certainly affect
> > transfers on the internal SoC/Processor/Chip internal bus/fabric.
>
> This needs to explain how a field in a PCIe TLP affects transfers on
> these non-PCIe fabrics.
>
> > These quirks are currently implemented in the
> > controller driver and only applies when the controller has been probed
> > and to each endpoint detected on this particular controller.
> >
> > Continue having separate quirks for each controller if the core
> > isn't the right place to handle MPS/MRRS.
>
> I see similar code in dwc/pci-keystone.c.  Does this problem actually
> affect *all* DesignWare-based controllers?
>
> If so, we should put the workaround in the common dwc code, e.g.,
> pcie-designware.c or similar.
>
> It also seems to affect pci-loongson.c (not DesignWare-based).  Is
> there some reason it has the same problem, e.g., does loongson contain
> DesignWare IP, or does it use the same non-PCIe fabric?
>
> > >> Neil
> >
> > Signed-off-by: Artem Lapkin <art at khadas.com>
> > ---
> >  drivers/pci/controller/dwc/pci-meson.c | 31 ++++++++++++++++++++++++++
> >  1 file changed, 31 insertions(+)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
> > index 686ded034..1498950de 100644
> > --- a/drivers/pci/controller/dwc/pci-meson.c
> > +++ b/drivers/pci/controller/dwc/pci-meson.c
> > @@ -466,6 +466,37 @@ static int meson_pcie_probe(struct platform_device *pdev)
> >       return ret;
> >  }
> >
> > +static void meson_mrrs_limit_quirk(struct pci_dev *dev)
> > +{
> > +     struct pci_bus *bus = dev->bus;
> > +     int mrrs, mrrs_limit = 256;
> > +     static const struct pci_device_id bridge_devids[] = {
> > +             { PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3) },
>
> I don't really believe that PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 is the
> only device affected here.  Is this related to the Meson root port, or
> is it related to a PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 on a plug-in card?
> I guess the former, since you're searching upward for a root port.
>
> So why is this limited to PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3?
>
> > +             { 0, },
> > +     };
> > +
> > +     /* look for the matching bridge */
> > +     while (!pci_is_root_bus(bus)) {
> > +             /*
> > +              * 256 bytes maximum read request size. They can't handle
> > +              * anything larger than this. So force this limit on
> > +              * any devices attached under these ports.
> > +              */
> > +             if (!pci_match_id(bridge_devids, bus->self)) {
> > +                     bus = bus->parent;
> > +                     continue;
> > +             }
> > +
> > +             mrrs = pcie_get_readrq(dev);
> > +             if (mrrs > mrrs_limit) {
> > +                     pci_info(dev, "limiting MRRS %d to %d\n", mrrs, mrrs_limit);
> > +                     pcie_set_readrq(dev, mrrs_limit);
> > +             }
> > +             break;
> > +     }
> > +}
> > +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, meson_mrrs_limit_quirk);
> > +
> >  static const struct of_device_id meson_pcie_of_match[] = {
> >       {
> >               .compatible = "amlogic,axg-pcie",
> > --
> > 2.25.1
> >