[PATCH] ARM: dts: meson8: Use a higher default GPU clock frequency
Neil Armstrong
narmstrong at baylibre.com
Mon Jul 26 01:12:39 PDT 2021
Hi,
On Sun, 11 Jul 2021 23:40:23 +0200, Martin Blumenstingl wrote:
> We are seeing "imprecise external abort (0x1406)" errors during boot
> (which then cause the whole board to hang) on Meson8 (but not Meson8m2).
> These are observed while trying to access the GPU's registers when the
> MALI clock is running at it's default setting of 24MHz. The 3.10 vendor
> kernel uses 318.75MHz as "default" GPU frequency. Using that makes the
> "imprecise external aborts" go away.
> Add the assigned-clocks and assigned-clock-rates properties to also bump
> the MALI clock to 318.75MHz before accessing any of it's registers.
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (for-next)
[1/1] ARM: dts: meson8: Use a higher default GPU clock frequency
https://git.kernel.org/amlogic/c/44cf630bcb8c5ec78125805c9447dd5766792224
--
Neil
More information about the linux-amlogic
mailing list