[PATCHv1 0/3] Meson-8b and Meson-gxbb Fix some missing code

[Anand Moon]

On Odroid C1+ and Odroid C2 USB feature is broken

It's being observed the after initiation of USB phy
the USB port goes in to suspend state, If we pass usbcore.autosuspend=-1
via command line USB hot plug seen to be working.

Another issue I observed is increase of USB interrupts event
even if there is not much activity on USB ports.

$ cat /proc/interrupts | grep usb
 35:   26462800          0          0          0     GIC-0  63 Level     c90c0000.usb, dwc2_hsotg:usb1

Changes added power node to usb phy and small code cleanup
in usb phy.

Previous version RFC.
[0] https://patchwork.kernel.org/project/linux-amlogic/cover/20210617194154.2397-1-linux.amoon@gmail.com/
Dopped the reoder of code changes as of now.

Thanks
-Anand

Anand Moon (3):
  ARM: dts: meson8b: odroidc1: Add usb phy power node
  phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset
    mode
  phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER

 arch/arm/boot/dts/meson8b-odroidc1.dts | 20 ++++++++++++++++++++
 drivers/phy/amlogic/phy-meson8b-usb2.c |  8 ++++++--
 2 files changed, 26 insertions(+), 2 deletions(-)

-- 
2.32.0