ODROID-C1/-C2 USB Detection only triggered by some devices dwc2

[Martin Blumenstingl]

Hi Minas,

On Mon, Jul 12, 2021 at 8:42 AM Minas Harutyunyan
<Minas.Harutyunyan at synopsys.com> wrote:
[...]
> > 3. unplugging the Corsair Voyager and plugging in a USB 3.0 card
> > reader (nothing automatically happened), then running lsusb -vv and
> > lsusb -t
> Could you please set verbose debugging:
> CONFIG_USB_DWC2_VERBOSE=y
>
> and repeat test 3. There are couple of transaction errors and some EP
> stalled. I want to understand on which device/ep this happen.
sure, I attached the dmesg output (gzipped, since it's uncompressed
size is 1.5M) with CONFIG_USB_DWC2_VERBOSE=y
The lsusb -vv and lsusb -t outputs are the same so I did not attach them again.


Best regards,
Martin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dmesg.txt.gz
Type: application/gzip
Size: 158959 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-amlogic/attachments/20210712/9ac3fed3/attachment.gz>