[PATCH v3 2/3] clk: divider: Switch from .round_rate to .determine_rate by default

[Guenter Roeck]

On 7/1/21 1:57 PM, Martin Blumenstingl wrote:
> Hi Guenter,
> 
> On Thu, Jul 1, 2021 at 10:25 PM Guenter Roeck <linux at roeck-us.net> wrote:
> [...]
>> [    0.000000] [<c07be330>] (clk_core_determine_round_nolock) from [<c07c5480>] (clk_core_set_rate_nolock+0x184/0x294)
>> [    0.000000] [<c07c5480>] (clk_core_set_rate_nolock) from [<c07c55c0>] (clk_set_rate+0x30/0x64)
>> [    0.000000] [<c07c55c0>] (clk_set_rate) from [<c163c310>] (imx6ul_clocks_init+0x2798/0x2a44)
>> [    0.000000] [<c163c310>] (imx6ul_clocks_init) from [<c162a4e4>] (of_clk_init+0x180/0x26c)
>> [    0.000000] [<c162a4e4>] (of_clk_init) from [<c1604d34>] (time_init+0x20/0x30)
>> [    0.000000] [<c1604d34>] (time_init) from [<c1600e0c>] (start_kernel+0x4c8/0x6cc)
>> [    0.000000] [<c1600e0c>] (start_kernel) from [<00000000>] (0x0)
>> [    0.000000] Code: bad PC value
>> [    0.000000] ---[ end trace 7009a0f298fd39e9 ]---
>> [    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
>>
>> Bisct points to this patch as culprit. Reverting it fixes the problem.
> sorry for breaking imx6 - and at the same time: thanks for reporting this!
> 
> Do you have some additional information about this crash (which clock
> this relates to, file and line number, etc.)?
> I am struggling to understand the cause of this NULL dereference
> My patch doesn't change the clk_core_determine_round_nolock()
> implementation and the new determine_rate code-path (inside that
> function) doesn't seem to be more fragile in terms of NULL values
> compared to the round_rate code-path.
> Instead I think it's more likely that the problem is somewhere within
> clk_divider_determine_rate() (or in any helper function it uses), but
> that doesn't show up in the trace
> 
> I don't have any imx6 board myself and so far I am unable to reproduce
> this crash on any hardware I have.
> However, if it's a problem in my clk-divider.c changes then I'd like
> to find the cause (ASAP) because possibly more SoCs may be broken...
> 

I don't have such a board either. The problem shows up in my qemu boot tests. See
https://kerneltests.org/builders/qemu-arm-v7-next/builds/38/steps/qemubuildcommand/logs/stdio
for an example. The problem reproduces with qemu's mcimx6ul-evk and sabrelite
emulations.

Guenter