[PATCH v2] arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4

Kevin Hilman khilman at baylibre.com
Mon Jan 25 13:42:22 EST 2021


On Fri, 22 Jan 2021 06:52:18 +0100, Marek Szyprowski wrote:
> For the proper reboot Odroid-C4 board requires to switch TFLASH_VDD_EN
> pin to the high impedance mode, otherwise the board is stuck in the
> middle of loading early stages of the bootloader from SD card.
> 
> This can be achieved by using the OPEN_DRAIN flag instead of the
> ACTIVE_HIGH, what will leave the pin in input mode to achieve high state
> (pin has the pull-up) and solve the issue.

Applied, thanks!

[1/1] arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
      commit: c649d91a8ec4dda78bcbd3890156bffb4df2fa16

Best regards,
-- 
Kevin Hilman <khilman at baylibre.com>



More information about the linux-amlogic mailing list