[PATCH V2 6/6] tty: serial: meson: Change request_irq to devm_request_irq and move devm_request_irq to meson_uart_probe()
Yu Tu
yu.tu at amlogic.com
Wed Dec 29 05:53:50 PST 2021
Because an interrupt error occurs when the user opens /dev/ttyAML* but
don't close it, and then opens the same port again. This problem is
encountered in actual projects.
Signed-off-by: Yu Tu <yu.tu at amlogic.com>
---
drivers/tty/serial/meson_uart.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index c17109d6d441..41c2c607e70e 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -135,8 +135,6 @@ static void meson_uart_shutdown(struct uart_port *port)
unsigned long flags;
u32 val;
- free_irq(port->irq, port);
-
spin_lock_irqsave(&port->lock, flags);
val = readl(port->membase + AML_UART_CONTROL);
@@ -284,7 +282,6 @@ static void meson_uart_reset(struct uart_port *port)
static int meson_uart_startup(struct uart_port *port)
{
u32 val;
- int ret;
meson_uart_reset(port);
@@ -298,10 +295,7 @@ static int meson_uart_startup(struct uart_port *port)
val = (AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(port->fifosize / 2));
writel(val, port->membase + AML_UART_MISC);
- ret = request_irq(port->irq, meson_uart_interrupt, 0,
- port->name, port);
-
- return ret;
+ return 0;
}
static void meson_uart_change_speed(struct uart_port *port, unsigned long baud)
@@ -908,6 +902,14 @@ static int meson_uart_probe(struct platform_device *pdev)
meson_ports[pdev->id] = port;
platform_set_drvdata(pdev, port);
+ ret = devm_request_irq(&pdev->dev, port->irq, meson_uart_interrupt,
+ 0, dev_name(&pdev->dev), port);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request uart irq: %d\n",
+ ret);
+ return ret;
+ }
+
/* reset port before registering (and possibly registering console) */
meson_uart_reset(port);
--
2.33.1
More information about the linux-amlogic
mailing list