[PATCH 1/1] arm64: dts: meson-g12b-odroid-n2: move assigned-clocks

[Jerome Brunet]

On Sat 18 Dec 2021 at 15:26, Alexander Stein <alexander.stein at mailbox.org> wrote:

> dtschema expects a 'clocks' property if 'assigned-clocks' is used, but
> 'sound' node does not.
> So move the MPLL[0-2] clock settings &clkc_audio which actually use them.

No, this does not make sense.
The sound card needs the clocks set in such way - nothing else
The clock controller work just as well regarless of the clock rate

Having a clock property or not does not change that

> This fixes the dtschema warning:
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dt.yaml: sound: 'clocks' is a dependency of 'assigned-clocks'
>

Then the schema needs fixing IMO

> Signed-off-by: Alexander Stein <alexander.stein at mailbox.org>
> ---
>  .../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi    | 15 +++++++--------
>  1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> index 9c05c83453f5..85257507206c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> @@ -252,14 +252,6 @@ sound {
>  				"U19 INR", "ACODEC LORP",
>  				"Lineout", "U19 OUTL",
>  				"Lineout", "U19 OUTR";
> -
> -		assigned-clocks = <&clkc CLKID_MPLL2>,
> -				  <&clkc CLKID_MPLL0>,
> -				  <&clkc CLKID_MPLL1>;
> -		assigned-clock-parents = <0>, <0>, <0>;
> -		assigned-clock-rates = <294912000>,
> -				       <270950400>,
> -				       <393216000>;
>  		status = "okay";
>  
>  		dai-link-0 {
> @@ -365,6 +357,13 @@ &cecb_AO {
>  };
>  
>  &clkc_audio {
> +	assigned-clocks = <&clkc CLKID_MPLL2>,
> +				<&clkc CLKID_MPLL0>,
> +				<&clkc CLKID_MPLL1>;
> +	assigned-clock-parents = <0>, <0>, <0>;
> +	assigned-clock-rates = <294912000>,
> +					<270950400>,
> +					<393216000>;
>  	status = "okay";
>  };