[PATCH] arm64: dts: meson-sm1: add spdifin spdifout nodes
Art Nikpal
email2tema at gmail.com
Tue Dec 14 18:32:07 PST 2021
On Mon, Oct 4, 2021 at 9:51 PM Jerome Brunet <jbrunet at baylibre.com> wrote:
>
>
> On Mon 06 Sep 2021 at 19:56, Art Nikpal <email2tema at gmail.com> wrote:
>
> >> It would be nice to indicate how it was tested ?
> >
> > https://github.com/khadas/khadas-linux-kernel/blob/master/patches/linux-5.14-rc5.sound/0001-arm64-dts-meson-khadas-vim3-remake-simple-sound-for-.patch
> >
> > i have test it
> >
> > i2s and spdif output from gpio headers - works well
>
> You have tested spdifout_a then.
>
> Nothing says spdifin (which was only tested on the axg series so far) or
> spdifout_b would actually work if enabled at a later point.
>
> I would prefer if things could at least be tested once before being
> added DT.
>
> >
> > On Mon, Sep 6, 2021 at 5:29 PM Jerome Brunet <jbrunet at baylibre.com> wrote:
> >>
> >>
> >> On Thu 02 Sep 2021 at 15:31, Neil Armstrong <narmstrong at baylibre.com> wrote:
> >>
> >> > Hi,
> >> >
> >> > On 11/08/2021 07:09, Artem Lapkin wrote:
> >> >> Add spdifin spdifout spdifout_b nodes for Amlogic SM1 SoCs.
> >> >>
> >> >> Signed-off-by: Artem Lapkin <art at khadas.com>
> >> >> ---
> >> >> arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 40 ++++++++++++++++++++++
> >> >> 1 file changed, 40 insertions(+)
> >> >>
> >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> >> >> index 3d8b1f4f2..1efdbb61e 100644
> >> >> --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> >> >> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> >> >> @@ -356,6 +356,33 @@ tdmin_lb: audio-controller at 3c0 {
> >> >> status = "disabled";
> >> >> };
> >> >>
> >> >> + spdifin: audio-controller at 400 {
> >> >> + compatible = "amlogic,g12a-spdifin",
> >> >> + "amlogic,axg-spdifin";
> >> >> + reg = <0x0 0x400 0x0 0x30>;
> >> >> + #sound-dai-cells = <0>;
> >> >> + sound-name-prefix = "SPDIFIN";
> >> >> + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
> >> >> + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
> >> >> + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
> >> >> + clock-names = "pclk", "refclk";
> >> >> + resets = <&clkc_audio AUD_RESET_SPDIFIN>;
> >> >> + status = "disabled";
> >> >> + };
> >> >> +
> >> >> + spdifout: audio-controller at 480 {
> >> >> + compatible = "amlogic,g12a-spdifout",
> >> >> + "amlogic,axg-spdifout";
> >> >> + reg = <0x0 0x480 0x0 0x50>;
> >> >> + #sound-dai-cells = <0>;
> >> >> + sound-name-prefix = "SPDIFOUT";
> >> >> + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
> >> >> + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
> >> >> + clock-names = "pclk", "mclk";
> >> >> + resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
> >> >> + status = "disabled";
> >> >> + };
> >> >> +
> >> >> tdmout_a: audio-controller at 500 {
> >> >> compatible = "amlogic,sm1-tdmout";
> >> >> reg = <0x0 0x500 0x0 0x40>;
> >> >> @@ -401,6 +428,19 @@ tdmout_c: audio-controller at 580 {
> >> >> status = "disabled";
> >> >> };
> >> >>
> >> >> + spdifout_b: audio-controller at 680 {
> >> >> + compatible = "amlogic,g12a-spdifout",
> >> >> + "amlogic,axg-spdifout";
> >> >> + reg = <0x0 0x680 0x0 0x50>;
> >> >> + #sound-dai-cells = <0>;
> >> >> + sound-name-prefix = "SPDIFOUT_B";
> >> >> + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
> >> >> + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
> >> >> + clock-names = "pclk", "mclk";
> >> >> + resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>;
> >> >> + status = "disabled";
> >> >> + };
> >> >> +
> >> >> toacodec: audio-controller at 740 {
> >> >> compatible = "amlogic,sm1-toacodec",
> >> >> "amlogic,g12a-toacodec";
> >> >>
> >> >
> >> > Jerome could you quickly review this ?
> >> >
> >>
> >> Just this, without the related card change is not usefull as it won't be
> >> part of the card.
Current sound card dt configuration not configured for it, but we can
apply dt overlays anytime.
IMHO: current sound configuration is not ideal and for some tasks
better to use custom configuration.
but anyway i think meson-sm1.dtsi must be completed by missed spdif in/out nodes
> >>
> >> It would be nice to indicate how it was tested ?
> >>
> >> AFAIK:
> >> - spdifout b can only be routed to hdmi and dw-hdmi driver does not
> >> support that yet
Ok! But why not accept it at this moment - next time will be easy to
improve dw-hdmi driver
+like options i can submit new patch without spdifout_b node
> >> - the VIM3 does not have connectors for the spdif (in or out). If it
we have test SPDIF in and SPDIF OUT both works fine on VIM3L meson-sm1
> >> requires some extension card, it should be noted somewhere, at least
SPDIF in and SPDIF OUT both pins available via GPIO header ( SPDIF_OUT
PIN 13 and SPDIF_IN PIN 35 - same PWM_F )
> >>
> >>
> >> > Thanks,
> >> > Neil
> >>
>
More information about the linux-amlogic
mailing list