[PATCH V2] arm64: dts: add support for S4 based Amlogic AQ222

Neil Armstrong narmstrong at baylibre.com
Thu Dec 9 06:00:25 PST 2021


Hi,

On 08/12/2021 07:44, xianwei.zhao wrote:
> Add basic support for the Amlogic S4 based Amlogic AQ222 board:
> which describe components as follows: CPU, GIC, IRQ, Timer, UART.
> It's capable of booting up into the serial console.
> 
> Signed-off-by: xianwei.zhao <xianwei.zhao at amlogic.com>
> ---
> V1 -> V2: cleaned up coding style, modify CPU affinity of timer interrups,
>           and modify GIC reg defintions.
> ---
>  arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>  .../dts/amlogic/meson-s4-s805x2-aq222.dts     | 30 ++++++
>  arch/arm64/boot/dts/amlogic/meson-s4.dtsi     | 99 +++++++++++++++++++
>  3 files changed, 130 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 5148cd9e5146..faea74a45994 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -57,3 +57,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> new file mode 100644
> index 000000000000..3b340594a125
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-s4.dtsi"
> +
> +/ {
> +	model = "Amlogic Meson S4 AQ222 Development Board";
> +	compatible = "amlogic,aq222";

According to bindings, it should be: compatible = "amlogic,aq222, "meson,s4";

> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &uart_B;
> +	};
> +
> +	memory at 00000000 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x40000000>;
> +	};
> +
> +};
> +
> +&uart_B {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> new file mode 100644
> index 000000000000..d7083c93d3d0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> @@ -0,0 +1,99 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	cpus:cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0:cpu at 0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35","arm,armv8";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +		};
> +
> +		CPU1:cpu at 1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35","arm,armv8";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +		};
> +
> +		CPU2:cpu at 2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35","arm,armv8";
> +			reg = <0x0 0x2>;
> +			enable-method = "psci";
> +		};
> +
> +		CPU3:cpu at 3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35","arm,armv8";
> +			reg = <0x0 0x3>;
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	xtal: xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal";
> +		#clock-cells = <0>;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		gic: interrupt-controller at fff01000 {
> +			compatible = "arm,gic-400";
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			interrupt-controller;
> +			reg = <0x0 0xfff01000 0 0x1000>,
> +			      <0x0 0xfff02000 0 0x2000>,
> +			      <0x0 0xfff04000 0 0x2000>,
> +			      <0x0 0xfff06000 0 0x2000>;
> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +		};
> +
> +		apb4: apb4 at fe000000 {
> +			compatible = "simple-bus";
> +			reg = <0x0 0xfe000000 0x0 0x480000>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
> +
> +			uart_B: serial at 7a000 {
> +				compatible = "amlogic,meson-s4-uart",
> +					     "amlogic,meson-ao-uart";

When will you send the serial bindings ?

> +				reg = <0x0 0x7a000 0x0 0x18>;
> +				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
> +				status = "disabled";
> +				clocks = <&xtal>, <&xtal>, <&xtal>;
> +				clock-names = "xtal", "pclk", "baud";
> +			};
> +		};
> +	};
> +};
> 
> base-commit: c5468e3c930d4d2937d3a842a85df0f74e95e152
> 

No need to send a v3 until both bindings have been accepted.

Neil



More information about the linux-amlogic mailing list