[PATCH] arm64: dts: meson: vim3: enable hdmi audio loopback

[Neil Armstrong]

On 29/04/2021 10:42, Jerome Brunet wrote:
> Enable audio capture frontends and a tdm decoder.
> This makes it possible to loopback the audio played on the hdmi codec,
> which is the only output interface at the moment.
> 
> Of course, one TODDR device would be enough to do that but since
> the 3 FRDDRs are enabled on the playback side, let's do the same on the
> capture side.
> 
> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> ---
>  .../boot/dts/amlogic/meson-khadas-vim3.dtsi   | 41 +++++++++++++++++--
>  .../dts/amlogic/meson-sm1-khadas-vim3l.dts    | 13 ++++++
>  2 files changed, 50 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> index 66d67524b031..3cf4ecb6d52e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> @@ -171,11 +171,16 @@ hdmi_connector_in: endpoint {
>  	sound {
>  		compatible = "amlogic,axg-sound-card";
>  		model = "KHADAS-VIM3";
> -		audio-aux-devs = <&tdmout_a>;
> +		audio-aux-devs = <&tdmin_a>, <&tdmout_a>;
>  		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
>  				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
>  				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
> -				"TDM_A Playback", "TDMOUT_A OUT";
> +				"TDM_A Playback", "TDMOUT_A OUT",
> +				"TDMIN_A IN 0", "TDM_A Capture",
> +				"TDMIN_A IN 3", "TDM_A Loopback",
> +				"TODDR_A IN 0", "TDMIN_A OUT",
> +				"TODDR_B IN 0", "TDMIN_A OUT",
> +				"TODDR_C IN 0", "TDMIN_A OUT";
>  
>  		assigned-clocks = <&clkc CLKID_MPLL2>,
>  				  <&clkc CLKID_MPLL0>,
> @@ -198,8 +203,20 @@ dai-link-2 {
>  			sound-dai = <&frddr_c>;
>  		};
>  
> -		/* 8ch hdmi interface */
>  		dai-link-3 {
> +			sound-dai = <&toddr_a>;
> +		};
> +
> +		dai-link-4 {
> +			sound-dai = <&toddr_b>;
> +		};
> +
> +		dai-link-5 {
> +			sound-dai = <&toddr_c>;
> +		};
> +
> +		/* 8ch hdmi interface */
> +		dai-link-6 {
>  			sound-dai = <&tdmif_a>;
>  			dai-format = "i2s";
>  			dai-tdm-slot-tx-mask-0 = <1 1>;
> @@ -214,7 +231,7 @@ codec {
>  		};
>  
>  		/* hdmi glue */
> -		dai-link-4 {
> +		dai-link-7 {
>  			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
>  
>  			codec {
> @@ -454,10 +471,26 @@ &tdmif_a {
>  	status = "okay";
>  };
>  
> +&tdmin_a {
> +	status = "okay";
> +};
> +
>  &tdmout_a {
>  	status = "okay";
>  };
>  
> +&toddr_a {
> +	status = "okay";
> +};
> +
> +&toddr_b {
> +	status = "okay";
> +};
> +
> +&toddr_c {
> +	status = "okay";
> +};
> +
>  &tohdmitx {
>  	status = "okay";
>  };
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
> index 06de0b1ce726..f2c098143594 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
> @@ -32,6 +32,19 @@ vddcpu: regulator-vddcpu {
>  		regulator-boot-on;
>  		regulator-always-on;
>  	};
> +
> +	sound {
> +		model = "G12B-KHADAS-VIM3L";
> +		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
> +				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
> +				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
> +				"TDM_A Playback", "TDMOUT_A OUT",
> +				"TDMIN_A IN 0", "TDM_A Capture",
> +				"TDMIN_A IN 13", "TDM_A Loopback",
> +				"TODDR_A IN 0", "TDMIN_A OUT",
> +				"TODDR_B IN 0", "TDMIN_A OUT",
> +				"TODDR_C IN 0", "TDMIN_A OUT";
> +	};
>  };
>  
>  &cpu0 {
> 

Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>