[PATCH 1/2] arm64: dts: amlogic: misc DT schema fixups

Kevin Hilman khilman at baylibre.com
Wed Apr 21 21:48:32 BST 2021


Take a pass at cleaning up a bunch of warnings
from 'make dtbs_check' that have crept in.

Signed-off-by: Kevin Hilman <khilman at baylibre.com>
---
 Documentation/devicetree/bindings/media/rc.yaml    |  4 ++++
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi          |  4 ++--
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi         |  1 -
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi  | 14 +++++++-------
 .../arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts |  2 +-
 .../boot/dts/amlogic/meson-g12b-gtking-pro.dts     |  4 ++--
 arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts  |  2 +-
 .../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi     |  4 ++--
 .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts |  2 +-
 .../dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts |  2 +-
 .../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts |  8 ++++----
 .../boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts |  2 +-
 .../boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts   |  2 +-
 .../boot/dts/amlogic/meson-gxm-wetek-core2.dts     |  2 +-
 arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi |  4 ++--
 .../arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts |  2 +-
 16 files changed, 31 insertions(+), 28 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml
index 946441b4e1a5..c4a088669112 100644
--- a/Documentation/devicetree/bindings/media/rc.yaml
+++ b/Documentation/devicetree/bindings/media/rc.yaml
@@ -90,9 +90,12 @@ properties:
       - rc-leadtek-y04g0051
       - rc-lme2510
       - rc-manli
+      - rc-mecool-kii-pro
+      - rc-mecool-kiii-pro
       - rc-medion-x10
       - rc-medion-x10-digitainer
       - rc-medion-x10-or2x
+      - rc-minix-neo
       - rc-msi-digivox-ii
       - rc-msi-digivox-iii
       - rc-msi-tvanywhere
@@ -145,6 +148,7 @@ properties:
       - rc-videomate-s350
       - rc-videomate-tv-pvr
       - rc-videostrong-kii-pro
+      - rc-vega-s9x
       - rc-wetek-hub
       - rc-wetek-play2
       - rc-winfast
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 755b4ad15184..b4000cf65a9a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -88,13 +88,13 @@ reset: reset-controller at 0 {
 				#reset-cells = <1>;
 			};
 
-			periphs_pinctrl: pinctrl at 0400 {
+			periphs_pinctrl: pinctrl at 400 {
 				compatible = "amlogic,meson-a1-periphs-pinctrl";
 				#address-cells = <2>;
 				#size-cells = <2>;
 				ranges;
 
-				gpio: bank at 0400 {
+				gpio: bank at 400 {
 					reg = <0x0 0x0400 0x0 0x003c>,
 					      <0x0 0x0480 0x0 0x0118>;
 					reg-names = "mux", "gpio";
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index d945c84ab697..895c43c7af9f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1731,7 +1731,6 @@ ge2d: ge2d at ff940000 {
 			interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&clkc CLKID_VAPB>;
 			resets = <&reset RESET_GE2D>;
-			reset-names = "core";
 		};
 
 		gic: interrupt-controller at ffc01000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 3dd2a5a8739b..793d48f72390 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -128,9 +128,9 @@ soc {
 
 		pcie: pcie at fc000000 {
 			compatible = "amlogic,g12a-pcie", "snps,dw-pcie";
-			reg = <0x0 0xfc000000 0x0 0x400000
-			       0x0 0xff648000 0x0 0x2000
-			       0x0 0xfc400000 0x0 0x200000>;
+			reg = <0x0 0xfc000000 0x0 0x400000>,
+			      <0x0 0xff648000 0x0 0x2000>,
+			      <0x0 0xfc400000 0x0 0x200000>;
 			reg-names = "elbi", "cfg", "config";
 			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <1>;
@@ -140,8 +140,8 @@ pcie: pcie at fc000000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000
-				  0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>;
+			ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>,
+				 <0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>;
 
 			clocks = <&clkc CLKID_PCIE_PHY
 				  &clkc CLKID_PCIE_COMB
@@ -2009,7 +2009,7 @@ mux {
 				};
 			};
 
-			vrtc: rtc at 0a8 {
+			vrtc: rtc at a8 {
 				compatible = "amlogic,meson-vrtc";
 				reg = <0x0 0x000a8 0x0 0x4>;
 			};
@@ -2187,7 +2187,7 @@ gpio_intc: interrupt-controller at f080 {
 				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
 			};
 
-			watchdog: wdt at f0d0 {
+			watchdog: watchdog at f0d0 {
 				compatible = "amlogic,meson-gxbb-wdt";
 				reg = <0x0 0xf0d0 0x0 0x10>;
 				clocks = <&xtal>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
index 211191f66344..6c7bfacbad78 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
@@ -12,7 +12,7 @@
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
-	compatible = "azw,gsking-x", "amlogic,g12b";
+	compatible = "azw,gsking-x", "amlogic,s922x", "amlogic,g12b";
 	model = "Beelink GS-King X";
 
 	aliases {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
index 0e331aa5a2d7..707daf92787b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
@@ -11,7 +11,7 @@
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
-	compatible = "azw,gtking", "amlogic,g12b";
+	compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b";
 	model = "Beelink GT-King Pro";
 
 	aliases {
@@ -35,7 +35,7 @@ power-button {
 	leds {
 		compatible = "gpio-leds";
 
-		white {
+		led-white {
 			label = "power:white";
 			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
index a7db84a500bb..5d96c1449050 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
@@ -11,7 +11,7 @@
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
-	compatible = "azw,gtking", "amlogic,g12b";
+	compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b";
 	model = "Beelink GT-King";
 
 	aliases {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 473b81c652cf..344573e157a7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -42,7 +42,7 @@ emmc_pwrseq: emmc-pwrseq {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			label = "n2:blue";
 			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -497,7 +497,7 @@ &gpio {
 	 * This signal should be handled by a USB specific power sequence
 	 * in order to reset the Hub when USB bus is powered down.
 	 */
-	usb-hub {
+	hog-0 {
 		gpio-hog;
 		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index bfaf7f41a2d6..201596247fd9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -257,7 +257,7 @@ &gpio_ao {
 	 * This signal should be handled by a USB specific power sequence
 	 * in order to reset the Hub when USB bus is powered down.
 	 */
-	usb-hub {
+	hog-0 {
 		gpio-hog;
 		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
index 5ab5d3aa0646..c529b6c860a4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
@@ -44,7 +44,7 @@ button at 0 {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
index ad6d72254150..b331a013572f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
@@ -16,28 +16,28 @@ / {
 	leds {
 		compatible = "gpio-leds";
 
-		yellow {
+		led-yellow {
 			color = <LED_COLOR_ID_YELLOW>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		blue {
+		led-blue {
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		green {
+		led-green {
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		red {
+		led-red {
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
index 0651756d7fb5..ebebf344b715 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
@@ -49,7 +49,7 @@ button at 0 {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
index a414cd39c2b1..ea9f234d1fc7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
@@ -17,7 +17,7 @@ / {
 	leds {
 		compatible = "gpio-leds";
 
-		white {
+		led-white {
 			color = <LED_COLOR_ID_WHITE>;
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
index ec794c134c15..1e7f77f9b533 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
@@ -22,7 +22,7 @@ memory at 0 {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 877e3b989203..66d67524b031 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -43,14 +43,14 @@ button-function {
 	leds {
 		compatible = "gpio-leds";
 
-		white {
+		led-white {
 			color = <LED_COLOR_ID_WHITE>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		red {
+		led-red {
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index b2a4e823c1d8..8c327c03d845 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -47,7 +47,7 @@ &gpio {
 	 * This signal should be handled by a USB specific power sequence
 	 * in order to reset the Hub when USB bus is powered down.
 	 */
-	usb-hub {
+	hog-0 {
 		gpio-hog;
 		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
 		output-high;
-- 
2.29.2




More information about the linux-amlogic mailing list