[PATCH v2 3/3] phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog
Neil Armstrong
narmstrong at baylibre.com
Tue Sep 29 05:25:49 EDT 2020
Hi Kishon,
Gentle ping.
Thanks,
Neil
On 15/09/2020 15:03, Neil Armstrong wrote:
> The AXG Analog MIPI-DSI PHY also provides functions to the PCIe PHY,
> thus we need to have inclusive support for both interfaces at runtime.
>
> This fixes the regmap get from parent node, removes cell param
> to select a mode and implement runtime configuration & power on/off
> for both functions since they are not exclusive.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> Reviewed-by: Remi Pommarel <repk at triplefau.lt>
> ---
> drivers/phy/amlogic/Kconfig | 1 +
> .../amlogic/phy-meson-axg-mipi-pcie-analog.c | 204 ++++++++++++------
> 2 files changed, 136 insertions(+), 69 deletions(-)
>
> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
> index 99e8a4c7f1f3..db5d0cd757e3 100644
> --- a/drivers/phy/amlogic/Kconfig
> +++ b/drivers/phy/amlogic/Kconfig
> @@ -66,6 +66,7 @@ config PHY_MESON_AXG_MIPI_PCIE_ANALOG
> depends on OF && (ARCH_MESON || COMPILE_TEST)
> select GENERIC_PHY
> select REGMAP_MMIO
> + select GENERIC_PHY_MIPI_DPHY
> help
> Enable this to support the Meson MIPI + PCIE analog PHY
> found in Meson AXG SoCs.
> diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
> index 1431cbf885e1..6eb21551bdd9 100644
> --- a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
> +++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
> @@ -4,9 +4,13 @@
> *
> * Copyright (C) 2019 Remi Pommarel <repk at triplefau.lt>
> */
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> #include <linux/module.h>
> #include <linux/phy/phy.h>
> #include <linux/regmap.h>
> +#include <linux/delay.h>
> +#include <linux/mfd/syscon.h>
> #include <linux/platform_device.h>
> #include <dt-bindings/phy/phy.h>
>
> @@ -14,10 +18,10 @@
> #define HHI_MIPI_CNTL0_COMMON_BLOCK GENMASK(31, 28)
> #define HHI_MIPI_CNTL0_ENABLE BIT(29)
> #define HHI_MIPI_CNTL0_BANDGAP BIT(26)
> -#define HHI_MIPI_CNTL0_DECODE_TO_RTERM GENMASK(15, 12)
> -#define HHI_MIPI_CNTL0_OUTPUT_EN BIT(3)
> +#define HHI_MIPI_CNTL0_DIF_REF_CTL1 GENMASK(25, 16)
> +#define HHI_MIPI_CNTL0_DIF_REF_CTL0 GENMASK(15, 0)
>
> -#define HHI_MIPI_CNTL1 0x01
> +#define HHI_MIPI_CNTL1 0x04
> #define HHI_MIPI_CNTL1_CH0_CML_PDR_EN BIT(12)
> #define HHI_MIPI_CNTL1_LP_ABILITY GENMASK(5, 4)
> #define HHI_MIPI_CNTL1_LP_RESISTER BIT(3)
> @@ -25,100 +29,170 @@
> #define HHI_MIPI_CNTL1_INPUT_SEL BIT(1)
> #define HHI_MIPI_CNTL1_PRBS7_EN BIT(0)
>
> -#define HHI_MIPI_CNTL2 0x02
> +#define HHI_MIPI_CNTL2 0x08
> #define HHI_MIPI_CNTL2_CH_PU GENMASK(31, 25)
> #define HHI_MIPI_CNTL2_CH_CTL GENMASK(24, 19)
> #define HHI_MIPI_CNTL2_CH0_DIGDR_EN BIT(18)
> #define HHI_MIPI_CNTL2_CH_DIGDR_EN BIT(17)
> #define HHI_MIPI_CNTL2_LPULPS_EN BIT(16)
> -#define HHI_MIPI_CNTL2_CH_EN(n) BIT(15 - (n))
> +#define HHI_MIPI_CNTL2_CH_EN GENMASK(15, 11)
> #define HHI_MIPI_CNTL2_CH0_LP_CTL GENMASK(10, 1)
>
> +#define DSI_LANE_0 (1 << 4)
> +#define DSI_LANE_1 (1 << 3)
> +#define DSI_LANE_CLK (1 << 2)
> +#define DSI_LANE_2 (1 << 1)
> +#define DSI_LANE_3 (1 << 0)
> +#define DSI_LANE_MASK (0x1F)
> +
> struct phy_axg_mipi_pcie_analog_priv {
> struct phy *phy;
> - unsigned int mode;
> struct regmap *regmap;
> + bool dsi_configured;
> + bool dsi_enabled;
> + bool powered;
> + struct phy_configure_opts_mipi_dphy config;
> };
>
> -static const struct regmap_config phy_axg_mipi_pcie_analog_regmap_conf = {
> - .reg_bits = 8,
> - .val_bits = 32,
> - .reg_stride = 4,
> - .max_register = HHI_MIPI_CNTL2,
> -};
> +static void phy_bandgap_enable(struct phy_axg_mipi_pcie_analog_priv *priv)
> +{
> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
> + HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP);
>
> -static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy)
> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
> + HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE);
> +}
> +
> +static void phy_bandgap_disable(struct phy_axg_mipi_pcie_analog_priv *priv)
> {
> - struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
> + HHI_MIPI_CNTL0_BANDGAP, 0);
> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
> + HHI_MIPI_CNTL0_ENABLE, 0);
> +}
>
> - /* MIPI not supported yet */
> - if (priv->mode != PHY_TYPE_PCIE)
> - return -EINVAL;
> +static void phy_dsi_analog_enable(struct phy_axg_mipi_pcie_analog_priv *priv)
> +{
> + u32 reg;
>
> regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
> - HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP);
> + HHI_MIPI_CNTL0_DIF_REF_CTL1,
> + FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0x1b8));
> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
> + BIT(31), BIT(31));
> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
> + HHI_MIPI_CNTL0_DIF_REF_CTL0,
> + FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL0, 0x8));
> +
> + regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0x001e);
> +
> + regmap_write(priv->regmap, HHI_MIPI_CNTL2,
> + (0x26e0 << 16) | (0x459 << 0));
> +
> + reg = DSI_LANE_CLK;
> + switch (priv->config.lanes) {
> + case 4:
> + reg |= DSI_LANE_3;
> + fallthrough;
> + case 3:
> + reg |= DSI_LANE_2;
> + fallthrough;
> + case 2:
> + reg |= DSI_LANE_1;
> + fallthrough;
> + case 1:
> + reg |= DSI_LANE_0;
> + break;
> + default:
> + reg = 0;
> + }
> +
> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL2,
> + HHI_MIPI_CNTL2_CH_EN,
> + FIELD_PREP(HHI_MIPI_CNTL2_CH_EN, reg));
> +
> + priv->dsi_enabled = true;
> +}
>
> +static void phy_dsi_analog_disable(struct phy_axg_mipi_pcie_analog_priv *priv)
> +{
> regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
> - HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE);
> - return 0;
> + HHI_MIPI_CNTL0_DIF_REF_CTL1,
> + FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0));
> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, BIT(31), 0);
> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
> + HHI_MIPI_CNTL0_DIF_REF_CTL1, 0);
> +
> + regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0x6);
> +
> + regmap_write(priv->regmap, HHI_MIPI_CNTL2, 0x00200000);
> +
> + priv->dsi_enabled = false;
> }
>
> -static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy)
> +static int phy_axg_mipi_pcie_analog_configure(struct phy *phy,
> + union phy_configure_opts *opts)
> {
> struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
> + int ret;
>
> - /* MIPI not supported yet */
> - if (priv->mode != PHY_TYPE_PCIE)
> - return -EINVAL;
> + ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
> + if (ret)
> + return ret;
> +
> + memcpy(&priv->config, opts, sizeof(priv->config));
> +
> + priv->dsi_configured = true;
> +
> + /* If PHY was already powered on, setup the DSI analog part */
> + if (priv->powered) {
> + /* If reconfiguring, disable & reconfigure */
> + if (priv->dsi_enabled)
> + phy_dsi_analog_disable(priv);
> +
> + usleep_range(100, 200);
> +
> + phy_dsi_analog_enable(priv);
> + }
>
> - regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
> - HHI_MIPI_CNTL0_BANDGAP, 0);
> - regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
> - HHI_MIPI_CNTL0_ENABLE, 0);
> return 0;
> }
>
> -static int phy_axg_mipi_pcie_analog_init(struct phy *phy)
> +static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy)
> {
> + struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
> +
> + phy_bandgap_enable(priv);
> +
> + if (priv->dsi_configured)
> + phy_dsi_analog_enable(priv);
> +
> + priv->powered = true;
> +
> return 0;
> }
>
> -static int phy_axg_mipi_pcie_analog_exit(struct phy *phy)
> +static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy)
> {
> + struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
> +
> + phy_bandgap_disable(priv);
> +
> + if (priv->dsi_enabled)
> + phy_dsi_analog_disable(priv);
> +
> + priv->powered = false;
> +
> return 0;
> }
>
> static const struct phy_ops phy_axg_mipi_pcie_analog_ops = {
> - .init = phy_axg_mipi_pcie_analog_init,
> - .exit = phy_axg_mipi_pcie_analog_exit,
> + .configure = phy_axg_mipi_pcie_analog_configure,
> .power_on = phy_axg_mipi_pcie_analog_power_on,
> .power_off = phy_axg_mipi_pcie_analog_power_off,
> .owner = THIS_MODULE,
> };
>
> -static struct phy *phy_axg_mipi_pcie_analog_xlate(struct device *dev,
> - struct of_phandle_args *args)
> -{
> - struct phy_axg_mipi_pcie_analog_priv *priv = dev_get_drvdata(dev);
> - unsigned int mode;
> -
> - if (args->args_count != 1) {
> - dev_err(dev, "invalid number of arguments\n");
> - return ERR_PTR(-EINVAL);
> - }
> -
> - mode = args->args[0];
> -
> - /* MIPI mode is not supported yet */
> - if (mode != PHY_TYPE_PCIE) {
> - dev_err(dev, "invalid phy mode select argument\n");
> - return ERR_PTR(-EINVAL);
> - }
> -
> - priv->mode = mode;
> - return priv->phy;
> -}
> -
> static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
> {
> struct phy_provider *phy;
> @@ -126,27 +200,20 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
> struct phy_axg_mipi_pcie_analog_priv *priv;
> struct device_node *np = dev->of_node;
> struct regmap *map;
> - struct resource *res;
> - void __iomem *base;
> int ret;
>
> priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
>
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - base = devm_ioremap_resource(dev, res);
> - if (IS_ERR(base)) {
> - dev_err(dev, "failed to get regmap base\n");
> - return PTR_ERR(base);
> - }
> -
> - map = devm_regmap_init_mmio(dev, base,
> - &phy_axg_mipi_pcie_analog_regmap_conf);
> + /* Get the hhi system controller node */
> + map = syscon_node_to_regmap(of_get_parent(dev->of_node));
> if (IS_ERR(map)) {
> - dev_err(dev, "failed to get HHI regmap\n");
> + dev_err(dev,
> + "failed to get HHI regmap\n");
> return PTR_ERR(map);
> }
> +
> priv->regmap = map;
>
> priv->phy = devm_phy_create(dev, np, &phy_axg_mipi_pcie_analog_ops);
> @@ -160,8 +227,7 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
> phy_set_drvdata(priv->phy, priv);
> dev_set_drvdata(dev, priv);
>
> - phy = devm_of_phy_provider_register(dev,
> - phy_axg_mipi_pcie_analog_xlate);
> + phy = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>
> return PTR_ERR_OR_ZERO(phy);
> }
>
More information about the linux-amlogic
mailing list