[PATCH v4 0/4] drm: panel: add support for TDO tl070wsh30 panel

[Neil Armstrong]

Hi Sam,

Is there anything more to change ?

Thanks,
Neil

On 15/09/2020 14:19, Neil Armstrong wrote:
> This adds support bindings and support for the TDO TL070WSH30 TFT-LCD panel
> module shipped with the Amlogic S400 Development Kit.
> The panel has a 1024×600 resolution and uses 24 bit RGB per pixel.
> It provides a MIPI DSI interface to the host, a built-in LED backlight
> and touch controller.
> 
> Changes since v3 at [3]:
> - reordered tdo vendor prefix
> 
> Changes since v2 at [2]:
> - added reset gpio to panel-simple-dsi bindings
> - moved bindings to panel-simple
> - re-ordered prepare/unprepare
> - added back refresh print
> - moved regulator/reset handling in prepare/unprepare
> - aligned remove/shutdown with panel-simple
> - added sentinel comment into dt match table
> 
> Changes since v1 at [1]:
> - added missing vendor-prefixes patch
> - removed vrefresh
> - fixed warning on add_panel return
> - removed DRM logging
> 
> [1] https://patchwork.freedesktop.org/series/81376/#rev1
> [2] https://patchwork.freedesktop.org/series/81376/#rev2
> [3] https://patchwork.freedesktop.org/series/81376/#rev3
> 
> Neil Armstrong (4):
>   dt-bindings: vendor-prefixes: Add Shanghai Top Display
>     Optolelectronics vendor prefix
>   dt-bindings: display: panel-simple-dsi: add optional reset gpio
>   dt-bindings: display: panel-simple-dsi: add TDO TL070WSH30 DSI panel
>     bindings
>   drm: panel: add TDO tl070wsh30 panel driver
> 
>  .../display/panel/panel-simple-dsi.yaml       |   3 +
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  drivers/gpu/drm/panel/Kconfig                 |  11 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c  | 250 ++++++++++++++++++
>  5 files changed, 267 insertions(+)
>  create mode 100644 drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c
>