[PATCH 5/8] arm64: dts: meson: remove reset-gpios from ethernet node for VIM2 meson-gxm-khadas-vim2

[Artem Lapkin]

1) fix down/up ethernet interface - need remove reset-gpios for ethernet node

`ifconfig eth0 down && ifconfig eth0 up` # didnt works with reset-gpios

2) add max-speed 1Gbit

Signed-off-by: Artem Lapkin <art at khadas.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index a6baf865aa2..70343da2811 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -195,7 +195,7 @@ external_phy: ethernet-phy at 0 {
 
 		reset-assert-us = <10000>;
 		reset-deassert-us = <30000>;
-		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		max-speed = <1000>;
 
 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_15 */
-- 
2.25.1