[PATCH 3/4] clk: meson: axg: add Video Clocks
Neil Armstrong
narmstrong at baylibre.com
Thu Sep 10 07:47:28 EDT 2020
Hi,
On 10/09/2020 12:13, Jerome Brunet wrote:
>
> On Mon 07 Sep 2020 at 11:38, Neil Armstrong <narmstrong at baylibre.com> wrote:
>
>> Add the Video Clocks present on the Amlogic AXg SoCs.
>>
>> The AXG only has a single ENCL CTS clock and even if VCLK exist along VCLK2,
>> only VCLK2 is used since it clocks the MIPI DSI IP directly.
>>
>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>> ---
>> drivers/clk/meson/axg.c | 774 ++++++++++++++++++++++++++++++++++++++++
>> drivers/clk/meson/axg.h | 21 +-
>> 2 files changed, 794 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
>> index 13fc0006f63d..2550616c14b0 100644
>> --- a/drivers/clk/meson/axg.c
>> +++ b/drivers/clk/meson/axg.c
>> @@ -1026,6 +1026,704 @@ static struct clk_regmap axg_sd_emmc_c_clk0 = {
>> },
>> };
>>
>> +/* VPU Clock */
>> +
>> +static const struct clk_hw *axg_vpu_parent_hws[] = {
>> + &axg_fclk_div4.hw,
>> + &axg_fclk_div3.hw,
>> + &axg_fclk_div5.hw,
>> + &axg_fclk_div7.hw,
>> +};
>> +
>> +static struct clk_regmap axg_vpu_0_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_VPU_CLK_CNTL,
>> + .mask = 0x3,
>> + .shift = 9,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vpu_0_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + /*
>> + * bits 9:10 selects from 4 possible parents:
>> + * fclk_div4, fclk_div3, fclk_div5, fclk_div7,
>> + */
>
> These comments (and the same bellow) are not very useful
Ok, these are copy/paste from gxbb.c and g12a.c, I wonder why these are now useless.
>
>> + .parent_hws = axg_vpu_parent_hws,
>> + .num_parents = ARRAY_SIZE(axg_vpu_parent_hws),
>
> Could you add a comment here explaining why parenting needs to be
> manually controlled ?
Ditto, this was already explained for GXBB & G12A.
The VPU clock needs a specific clock parenting defined in DT to
achieve the frequency used by the vendor.
>
>> + .flags = CLK_SET_RATE_NO_REPARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vpu_0_div = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = HHI_VPU_CLK_CNTL,
>> + .shift = 0,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vpu_0_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vpu_0_sel.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vpu_0 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VPU_CLK_CNTL,
>> + .bit_idx = 8,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vpu_0",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vpu_0_div.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>
> Why is UNUSED required ?
It's UNUSED until we have a mechanism to keep a clock enabled until the proper
module is loaded, and it was already discussed for GXBB & G12A.
>
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vpu_1_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_VPU_CLK_CNTL,
>> + .mask = 0x3,
>> + .shift = 25,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vpu_1_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + /*
>> + * bits 25:26 selects from 4 possible parents:
>> + * fclk_div4, fclk_div3, fclk_div5, fclk_div7,
>> + */
>> + .parent_hws = axg_vpu_parent_hws,
>> + .num_parents = ARRAY_SIZE(axg_vpu_parent_hws),
>> + .flags = CLK_SET_RATE_NO_REPARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vpu_1_div = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = HHI_VPU_CLK_CNTL,
>> + .shift = 16,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vpu_1_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vpu_1_sel.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vpu_1 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VPU_CLK_CNTL,
>> + .bit_idx = 24,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vpu_1",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vpu_1_div.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vpu = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_VPU_CLK_CNTL,
>> + .mask = 1,
>> + .shift = 31,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vpu",
>> + .ops = &clk_regmap_mux_ops,
>> + /*
>> + * bit 31 selects from 2 possible parents:
>> + * vpu_0 or vpu_1
>> + */
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vpu_0.hw,
>> + &axg_vpu_1.hw
>> + },
>> + .num_parents = 2,
>> + .flags = CLK_SET_RATE_NO_REPARENT,
>> + },
>> +};
>> +
>> +/* VAPB Clock */
>> +
>> +static const struct clk_hw *axg_vapb_parent_hws[] = {
>> + &axg_fclk_div4.hw,
>> + &axg_fclk_div3.hw,
>> + &axg_fclk_div5.hw,
>> + &axg_fclk_div7.hw,
>> +};
>
> This is the same as the vpu table. Could they share a single table ?
Yes, will do
>
>> +
>> +static struct clk_regmap axg_vapb_0_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_VAPBCLK_CNTL,
>> + .mask = 0x3,
>> + .shift = 9,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vapb_0_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + /*
>> + * bits 9:10 selects from 4 possible parents:
>> + * fclk_div4, fclk_div3, fclk_div5, fclk_div7,
>> + */
>> + .parent_hws = axg_vapb_parent_hws,
>> + .num_parents = ARRAY_SIZE(axg_vapb_parent_hws),
>> + .flags = CLK_SET_RATE_NO_REPARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vapb_0_div = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = HHI_VAPBCLK_CNTL,
>> + .shift = 0,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vapb_0_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vapb_0_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vapb_0 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VAPBCLK_CNTL,
>> + .bit_idx = 8,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vapb_0",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vapb_0_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vapb_1_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_VAPBCLK_CNTL,
>> + .mask = 0x3,
>> + .shift = 25,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vapb_1_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + /*
>> + * bits 25:26 selects from 4 possible parents:
>> + * fclk_div4, fclk_div3, fclk_div5, fclk_div7,
>> + */
>> + .parent_hws = axg_vapb_parent_hws,
>> + .num_parents = ARRAY_SIZE(axg_vapb_parent_hws),
>> + .flags = CLK_SET_RATE_NO_REPARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vapb_1_div = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = HHI_VAPBCLK_CNTL,
>> + .shift = 16,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vapb_1_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vapb_1_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vapb_1 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VAPBCLK_CNTL,
>> + .bit_idx = 24,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vapb_1",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vapb_1_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vapb_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_VAPBCLK_CNTL,
>> + .mask = 1,
>> + .shift = 31,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vapb_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + /*
>> + * bit 31 selects from 2 possible parents:
>> + * vapb_0 or vapb_1
>> + */
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vapb_0.hw,
>> + &axg_vapb_1.hw
>> + },
>> + .num_parents = 2,
>> + .flags = CLK_SET_RATE_NO_REPARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vapb = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VAPBCLK_CNTL,
>> + .bit_idx = 30,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vapb",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vapb_sel.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +/* Video Clocks */
>> +
>> +static const struct clk_hw *axg_vclk_parent_hws[] = {
>> + &axg_gp0_pll.hw,
>> + &axg_fclk_div4.hw,
>> + &axg_fclk_div3.hw,
>> + &axg_fclk_div5.hw,
>> + &axg_fclk_div2.hw,
>> + &axg_fclk_div7.hw,
>> + &axg_mpll1.hw,
>> +};
>> +
>> +static struct clk_regmap axg_vclk_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_VID_CLK_CNTL,
>> + .mask = 0x7,
>> + .shift = 16,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vclk_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_hws = axg_vclk_parent_hws,
>> + .num_parents = ARRAY_SIZE(axg_vclk_parent_hws),
>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
>> + },
>
> Why is NOCACHE ? Is there something poking behind CCF back ? if yes, why
> is this required ?
I'm surprised you ask this since the situation hasn't changed since I pushed the
video clock for GXBB, then G12A.
The switch to CCF for the VPU is still planned, but until now I was unable to allocate enough
time for this huge rework.
Since I'm the single DRM driver contributor and lacking any other reviewers, I must deal
with new features & bugfixing before moving to CCF.
The clock situation is far from perfect, and I'd also like it to be solved at some point.
I'll add the same explanation I gave for GXBB in https://lkml.kernel.org/r/1541516257-16157-5-git-send-email-narmstrong@baylibre.com
>
>> +};
>> +
>> +static struct clk_regmap axg_vclk2_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_VIID_CLK_CNTL,
>> + .mask = 0x7,
>> + .shift = 16,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vclk2_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_hws = axg_vclk_parent_hws,
>> + .num_parents = ARRAY_SIZE(axg_vclk_parent_hws),
>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk_input = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VID_CLK_DIV,
>> + .bit_idx = 16,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk_input",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk_sel.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk2_input = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VIID_CLK_DIV,
>> + .bit_idx = 16,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk2_input",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk2_sel.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk_div = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = HHI_VID_CLK_DIV,
>> + .shift = 0,
>> + .width = 8,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vclk_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vclk_input.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_GET_RATE_NOCACHE,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk2_div = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = HHI_VIID_CLK_DIV,
>> + .shift = 0,
>> + .width = 8,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vclk2_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vclk2_input.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_GET_RATE_NOCACHE,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VID_CLK_CNTL,
>> + .bit_idx = 19,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk_div.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk2 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VIID_CLK_CNTL,
>> + .bit_idx = 19,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk2",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk2_div.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk_div1 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VID_CLK_CNTL,
>> + .bit_idx = 0,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk_div1",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk_div2_en = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VID_CLK_CNTL,
>> + .bit_idx = 1,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk_div2_en",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk_div4_en = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VID_CLK_CNTL,
>> + .bit_idx = 2,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk_div4_en",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk_div6_en = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VID_CLK_CNTL,
>> + .bit_idx = 3,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk_div6_en",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk_div12_en = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VID_CLK_CNTL,
>> + .bit_idx = 4,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk_div12_en",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk2_div1 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VIID_CLK_CNTL,
>> + .bit_idx = 0,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk2_div1",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk2.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk2_div2_en = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VIID_CLK_CNTL,
>> + .bit_idx = 1,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk2_div2_en",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk2.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk2_div4_en = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VIID_CLK_CNTL,
>> + .bit_idx = 2,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk2_div4_en",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk2.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk2_div6_en = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VIID_CLK_CNTL,
>> + .bit_idx = 3,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk2_div6_en",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk2.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vclk2_div12_en = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VIID_CLK_CNTL,
>> + .bit_idx = 4,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vclk2_div12_en",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &axg_vclk2.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor axg_vclk_div2 = {
>> + .mult = 1,
>> + .div = 2,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vclk_div2",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vclk_div2_en.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor axg_vclk_div4 = {
>> + .mult = 1,
>> + .div = 4,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vclk_div4",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vclk_div4_en.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor axg_vclk_div6 = {
>> + .mult = 1,
>> + .div = 6,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vclk_div6",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vclk_div6_en.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor axg_vclk_div12 = {
>> + .mult = 1,
>> + .div = 12,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vclk_div12",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vclk_div12_en.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor axg_vclk2_div2 = {
>> + .mult = 1,
>> + .div = 2,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vclk2_div2",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vclk2_div2_en.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor axg_vclk2_div4 = {
>> + .mult = 1,
>> + .div = 4,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vclk2_div4",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vclk2_div4_en.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor axg_vclk2_div6 = {
>> + .mult = 1,
>> + .div = 6,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vclk2_div6",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vclk2_div6_en.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor axg_vclk2_div12 = {
>> + .mult = 1,
>> + .div = 12,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vclk2_div12",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vclk2_div12_en.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static u32 mux_table_cts_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 };
>> +static const struct clk_hw *axg_cts_parent_hws[] = {
>> + &axg_vclk_div1.hw,
>> + &axg_vclk_div2.hw,
>> + &axg_vclk_div4.hw,
>> + &axg_vclk_div6.hw,
>> + &axg_vclk_div12.hw,
>> + &axg_vclk2_div1.hw,
>> + &axg_vclk2_div2.hw,
>> + &axg_vclk2_div4.hw,
>> + &axg_vclk2_div6.hw,
>> + &axg_vclk2_div12.hw,
>> +};
>> +
>> +static struct clk_regmap axg_cts_encl_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_VIID_CLK_DIV,
>> + .mask = 0xf,
>> + .shift = 12,
>> + .table = mux_table_cts_sel,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "cts_encl_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_hws = axg_cts_parent_hws,
>> + .num_parents = ARRAY_SIZE(axg_cts_parent_hws),
>> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_cts_encl = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VID_CLK_CNTL2,
>> + .bit_idx = 3,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "cts_encl",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_cts_encl_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> + },
>> +};
>> +
>> static u32 mux_table_gen_clk[] = { 0, 4, 5, 6, 7, 8,
>> 9, 10, 11, 13, 14, };
>> static const struct clk_parent_data gen_clk_parent_data[] = {
>> @@ -1246,6 +1944,49 @@ static struct clk_hw_onecell_data axg_hw_onecell_data = {
>> [CLKID_HIFI_PLL_DCO] = &axg_hifi_pll_dco.hw,
>> [CLKID_PCIE_PLL_DCO] = &axg_pcie_pll_dco.hw,
>> [CLKID_PCIE_PLL_OD] = &axg_pcie_pll_od.hw,
>> + [CLKID_VPU_0_DIV] = &axg_vpu_0_div.hw,
>> + [CLKID_VPU_0_SEL] = &axg_vpu_0_sel.hw,
>> + [CLKID_VPU_0] = &axg_vpu_0.hw,
>> + [CLKID_VPU_1_DIV] = &axg_vpu_1_div.hw,
>> + [CLKID_VPU_1_SEL] = &axg_vpu_1_sel.hw,
>> + [CLKID_VPU_1] = &axg_vpu_1.hw,
>> + [CLKID_VPU] = &axg_vpu.hw,
>> + [CLKID_VAPB_0_DIV] = &axg_vapb_0_div.hw,
>> + [CLKID_VAPB_0_SEL] = &axg_vapb_0_sel.hw,
>> + [CLKID_VAPB_0] = &axg_vapb_0.hw,
>> + [CLKID_VAPB_1_DIV] = &axg_vapb_1_div.hw,
>> + [CLKID_VAPB_1_SEL] = &axg_vapb_1_sel.hw,
>> + [CLKID_VAPB_1] = &axg_vapb_1.hw,
>> + [CLKID_VAPB_SEL] = &axg_vapb_sel.hw,
>> + [CLKID_VAPB] = &axg_vapb.hw,
>> + [CLKID_VCLK] = &axg_vclk.hw,
>> + [CLKID_VCLK2] = &axg_vclk2.hw,
>> + [CLKID_VCLK_SEL] = &axg_vclk_sel.hw,
>> + [CLKID_VCLK2_SEL] = &axg_vclk2_sel.hw,
>> + [CLKID_VCLK_INPUT] = &axg_vclk_input.hw,
>> + [CLKID_VCLK2_INPUT] = &axg_vclk2_input.hw,
>> + [CLKID_VCLK_DIV] = &axg_vclk_div.hw,
>> + [CLKID_VCLK2_DIV] = &axg_vclk2_div.hw,
>> + [CLKID_VCLK_DIV2_EN] = &axg_vclk_div2_en.hw,
>> + [CLKID_VCLK_DIV4_EN] = &axg_vclk_div4_en.hw,
>> + [CLKID_VCLK_DIV6_EN] = &axg_vclk_div6_en.hw,
>> + [CLKID_VCLK_DIV12_EN] = &axg_vclk_div12_en.hw,
>> + [CLKID_VCLK2_DIV2_EN] = &axg_vclk2_div2_en.hw,
>> + [CLKID_VCLK2_DIV4_EN] = &axg_vclk2_div4_en.hw,
>> + [CLKID_VCLK2_DIV6_EN] = &axg_vclk2_div6_en.hw,
>> + [CLKID_VCLK2_DIV12_EN] = &axg_vclk2_div12_en.hw,
>> + [CLKID_VCLK_DIV1] = &axg_vclk_div1.hw,
>> + [CLKID_VCLK_DIV2] = &axg_vclk_div2.hw,
>> + [CLKID_VCLK_DIV4] = &axg_vclk_div4.hw,
>> + [CLKID_VCLK_DIV6] = &axg_vclk_div6.hw,
>> + [CLKID_VCLK_DIV12] = &axg_vclk_div12.hw,
>> + [CLKID_VCLK2_DIV1] = &axg_vclk2_div1.hw,
>> + [CLKID_VCLK2_DIV2] = &axg_vclk2_div2.hw,
>> + [CLKID_VCLK2_DIV4] = &axg_vclk2_div4.hw,
>> + [CLKID_VCLK2_DIV6] = &axg_vclk2_div6.hw,
>> + [CLKID_VCLK2_DIV12] = &axg_vclk2_div12.hw,
>> + [CLKID_CTS_ENCL_SEL] = &axg_cts_encl_sel.hw,
>> + [CLKID_CTS_ENCL] = &axg_cts_encl.hw,
>> [NR_CLKS] = NULL,
>> },
>> .num = NR_CLKS,
>> @@ -1341,6 +2082,39 @@ static struct clk_regmap *const axg_clk_regmaps[] = {
>> &axg_hifi_pll_dco,
>> &axg_pcie_pll_dco,
>> &axg_pcie_pll_od,
>> + &axg_vpu_0_div,
>> + &axg_vpu_0_sel,
>> + &axg_vpu_0,
>> + &axg_vpu_1_div,
>> + &axg_vpu_1_sel,
>> + &axg_vpu_1,
>> + &axg_vpu,
>> + &axg_vapb_0_div,
>> + &axg_vapb_0_sel,
>> + &axg_vapb_0,
>> + &axg_vapb_1_div,
>> + &axg_vapb_1_sel,
>> + &axg_vapb_1,
>> + &axg_vapb_sel,
>> + &axg_vapb,
>> + &axg_vclk,
>> + &axg_vclk2,
>> + &axg_vclk_sel,
>> + &axg_vclk2_sel,
>> + &axg_vclk_input,
>> + &axg_vclk2_input,
>> + &axg_vclk_div,
>> + &axg_vclk2_div,
>> + &axg_vclk_div2_en,
>> + &axg_vclk_div4_en,
>> + &axg_vclk_div6_en,
>> + &axg_vclk_div12_en,
>> + &axg_vclk2_div2_en,
>> + &axg_vclk2_div4_en,
>> + &axg_vclk2_div6_en,
>> + &axg_vclk2_div12_en,
>> + &axg_cts_encl_sel,
>> + &axg_cts_encl,
>> };
>>
>> static const struct meson_eeclkc_data axg_clkc_data = {
>> diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h
>> index 0431dabac629..a8787b394a47 100644
>> --- a/drivers/clk/meson/axg.h
>> +++ b/drivers/clk/meson/axg.h
>> @@ -139,8 +139,27 @@
>> #define CLKID_HIFI_PLL_DCO 88
>> #define CLKID_PCIE_PLL_DCO 89
>> #define CLKID_PCIE_PLL_OD 90
>> +#define CLKID_VPU_0_DIV 91
>> +#define CLKID_VPU_1_DIV 94
>> +#define CLKID_VAPB_0_DIV 98
>> +#define CLKID_VAPB_1_DIV 101
>> +#define CLKID_VCLK_SEL 108
>> +#define CLKID_VCLK2_SEL 109
>> +#define CLKID_VCLK_INPUT 110
>> +#define CLKID_VCLK2_INPUT 111
>> +#define CLKID_VCLK_DIV 112
>> +#define CLKID_VCLK2_DIV 113
>> +#define CLKID_VCLK_DIV2_EN 114
>> +#define CLKID_VCLK_DIV4_EN 115
>> +#define CLKID_VCLK_DIV6_EN 116
>> +#define CLKID_VCLK_DIV12_EN 117
>> +#define CLKID_VCLK2_DIV2_EN 118
>> +#define CLKID_VCLK2_DIV4_EN 119
>> +#define CLKID_VCLK2_DIV6_EN 120
>> +#define CLKID_VCLK2_DIV12_EN 121
>> +#define CLKID_CTS_ENCL_SEL 132
>>
>> -#define NR_CLKS 91
>> +#define NR_CLKS 134
>>
>> /* include the CLKIDs that have been made part of the DT binding */
>> #include <dt-bindings/clock/axg-clkc.h>
>
> Overall, there is quite an heavy use of CLK_IGNORE_USED and
> CLK_GET_RATE_NOCACHE which seems to indicate that something else is
> poking around in the clocks registers
>
> Details about why it should be done this way, and not through CCF API,
> should be provided.
>
Thanks,
Neil
More information about the linux-amlogic
mailing list