[PATCH 05/13] PCI: dwc: Ensure all outbound ATU windows are reset
Rob Herring
robh at kernel.org
Wed Oct 28 16:46:38 EDT 2020
The Layerscape driver clears the ATU registers which may have been
configured by the bootloader. Any driver could have the same issue
and doing it for all drivers doesn't hurt, so let's move it into the
common DWC code.
Cc: Minghuan Lian <minghuan.Lian at nxp.com>
Cc: Mingkai Hu <mingkai.hu at nxp.com>
Cc: Roy Zang <roy.zang at nxp.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
Cc: Bjorn Helgaas <bhelgaas at google.com>
Cc: Jingoo Han <jingoohan1 at gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel at synopsys.com>
Cc: linuxppc-dev at lists.ozlabs.org
Signed-off-by: Rob Herring <robh at kernel.org>
---
drivers/pci/controller/dwc/pci-layerscape.c | 14 --------------
drivers/pci/controller/dwc/pcie-designware-host.c | 5 +++++
2 files changed, 5 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index f24f79a70d9a..53e56d54c482 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -83,14 +83,6 @@ static void ls_pcie_drop_msg_tlp(struct ls_pcie *pcie)
iowrite32(val, pci->dbi_base + PCIE_STRFMR1);
}
-static void ls_pcie_disable_outbound_atus(struct ls_pcie *pcie)
-{
- int i;
-
- for (i = 0; i < PCIE_IATU_NUM; i++)
- dw_pcie_disable_atu(pcie->pci, i, DW_PCIE_REGION_OUTBOUND);
-}
-
static int ls1021_pcie_link_up(struct dw_pcie *pci)
{
u32 state;
@@ -136,12 +128,6 @@ static int ls_pcie_host_init(struct pcie_port *pp)
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct ls_pcie *pcie = to_ls_pcie(pci);
- /*
- * Disable outbound windows configured by the bootloader to avoid
- * one transaction hitting multiple outbound windows.
- * dw_pcie_setup_rc() will reconfigure the outbound windows.
- */
- ls_pcie_disable_outbound_atus(pcie);
ls_pcie_fix_error_response(pcie);
dw_pcie_dbi_ro_wr_en(pci);
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index cde45b2076ee..265a48f1a0ae 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -534,6 +534,7 @@ static struct pci_ops dw_pcie_ops = {
void dw_pcie_setup_rc(struct pcie_port *pp)
{
+ int i;
u32 val, ctrl, num_ctrls;
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -583,6 +584,10 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
dw_pcie_writel_dbi(pci, PCI_COMMAND, val);
+ /* Ensure all outbound windows are disabled so there are multiple matches */
+ for (i = 0; i < pci->num_viewport; i++)
+ dw_pcie_disable_atu(pci, i, DW_PCIE_REGION_OUTBOUND);
+
/*
* If the platform provides its own child bus config accesses, it means
* the platform uses its own address translation component rather than
--
2.25.1
More information about the linux-amlogic
mailing list