[PATCH v2 3/3] phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog
Kevin Hilman
khilman at baylibre.com
Tue Oct 20 19:10:24 EDT 2020
Hi Kishon,
It's been another few weeks, so another slightly less gentle ping. :)
Kevin
Neil Armstrong <narmstrong at baylibre.com> writes:
> Hi Kishon,
>
> Gentle ping.
>
> Thanks,
> Neil
>
> On 15/09/2020 15:03, Neil Armstrong wrote:
>> The AXG Analog MIPI-DSI PHY also provides functions to the PCIe PHY,
>> thus we need to have inclusive support for both interfaces at runtime.
>>
>> This fixes the regmap get from parent node, removes cell param
>> to select a mode and implement runtime configuration & power on/off
>> for both functions since they are not exclusive.
>>
>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>> Reviewed-by: Remi Pommarel <repk at triplefau.lt>
>> ---
>> drivers/phy/amlogic/Kconfig | 1 +
>> .../amlogic/phy-meson-axg-mipi-pcie-analog.c | 204 ++++++++++++------
>> 2 files changed, 136 insertions(+), 69 deletions(-)
>>
>> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
>> index 99e8a4c7f1f3..db5d0cd757e3 100644
>> --- a/drivers/phy/amlogic/Kconfig
>> +++ b/drivers/phy/amlogic/Kconfig
>> @@ -66,6 +66,7 @@ config PHY_MESON_AXG_MIPI_PCIE_ANALOG
>> depends on OF && (ARCH_MESON || COMPILE_TEST)
>> select GENERIC_PHY
>> select REGMAP_MMIO
>> + select GENERIC_PHY_MIPI_DPHY
>> help
>> Enable this to support the Meson MIPI + PCIE analog PHY
>> found in Meson AXG SoCs.
>> diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
>> index 1431cbf885e1..6eb21551bdd9 100644
>> --- a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
>> +++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
>> @@ -4,9 +4,13 @@
>> *
>> * Copyright (C) 2019 Remi Pommarel <repk at triplefau.lt>
>> */
>> +#include <linux/bitfield.h>
>> +#include <linux/bitops.h>
>> #include <linux/module.h>
>> #include <linux/phy/phy.h>
>> #include <linux/regmap.h>
>> +#include <linux/delay.h>
>> +#include <linux/mfd/syscon.h>
>> #include <linux/platform_device.h>
>> #include <dt-bindings/phy/phy.h>
>>
>> @@ -14,10 +18,10 @@
>> #define HHI_MIPI_CNTL0_COMMON_BLOCK GENMASK(31, 28)
>> #define HHI_MIPI_CNTL0_ENABLE BIT(29)
>> #define HHI_MIPI_CNTL0_BANDGAP BIT(26)
>> -#define HHI_MIPI_CNTL0_DECODE_TO_RTERM GENMASK(15, 12)
>> -#define HHI_MIPI_CNTL0_OUTPUT_EN BIT(3)
>> +#define HHI_MIPI_CNTL0_DIF_REF_CTL1 GENMASK(25, 16)
>> +#define HHI_MIPI_CNTL0_DIF_REF_CTL0 GENMASK(15, 0)
>>
>> -#define HHI_MIPI_CNTL1 0x01
>> +#define HHI_MIPI_CNTL1 0x04
>> #define HHI_MIPI_CNTL1_CH0_CML_PDR_EN BIT(12)
>> #define HHI_MIPI_CNTL1_LP_ABILITY GENMASK(5, 4)
>> #define HHI_MIPI_CNTL1_LP_RESISTER BIT(3)
>> @@ -25,100 +29,170 @@
>> #define HHI_MIPI_CNTL1_INPUT_SEL BIT(1)
>> #define HHI_MIPI_CNTL1_PRBS7_EN BIT(0)
>>
>> -#define HHI_MIPI_CNTL2 0x02
>> +#define HHI_MIPI_CNTL2 0x08
>> #define HHI_MIPI_CNTL2_CH_PU GENMASK(31, 25)
>> #define HHI_MIPI_CNTL2_CH_CTL GENMASK(24, 19)
>> #define HHI_MIPI_CNTL2_CH0_DIGDR_EN BIT(18)
>> #define HHI_MIPI_CNTL2_CH_DIGDR_EN BIT(17)
>> #define HHI_MIPI_CNTL2_LPULPS_EN BIT(16)
>> -#define HHI_MIPI_CNTL2_CH_EN(n) BIT(15 - (n))
>> +#define HHI_MIPI_CNTL2_CH_EN GENMASK(15, 11)
>> #define HHI_MIPI_CNTL2_CH0_LP_CTL GENMASK(10, 1)
>>
>> +#define DSI_LANE_0 (1 << 4)
>> +#define DSI_LANE_1 (1 << 3)
>> +#define DSI_LANE_CLK (1 << 2)
>> +#define DSI_LANE_2 (1 << 1)
>> +#define DSI_LANE_3 (1 << 0)
>> +#define DSI_LANE_MASK (0x1F)
>> +
>> struct phy_axg_mipi_pcie_analog_priv {
>> struct phy *phy;
>> - unsigned int mode;
>> struct regmap *regmap;
>> + bool dsi_configured;
>> + bool dsi_enabled;
>> + bool powered;
>> + struct phy_configure_opts_mipi_dphy config;
>> };
>>
>> -static const struct regmap_config phy_axg_mipi_pcie_analog_regmap_conf = {
>> - .reg_bits = 8,
>> - .val_bits = 32,
>> - .reg_stride = 4,
>> - .max_register = HHI_MIPI_CNTL2,
>> -};
>> +static void phy_bandgap_enable(struct phy_axg_mipi_pcie_analog_priv *priv)
>> +{
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> + HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP);
>>
>> -static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy)
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> + HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE);
>> +}
>> +
>> +static void phy_bandgap_disable(struct phy_axg_mipi_pcie_analog_priv *priv)
>> {
>> - struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> + HHI_MIPI_CNTL0_BANDGAP, 0);
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> + HHI_MIPI_CNTL0_ENABLE, 0);
>> +}
>>
>> - /* MIPI not supported yet */
>> - if (priv->mode != PHY_TYPE_PCIE)
>> - return -EINVAL;
>> +static void phy_dsi_analog_enable(struct phy_axg_mipi_pcie_analog_priv *priv)
>> +{
>> + u32 reg;
>>
>> regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> - HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP);
>> + HHI_MIPI_CNTL0_DIF_REF_CTL1,
>> + FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0x1b8));
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> + BIT(31), BIT(31));
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> + HHI_MIPI_CNTL0_DIF_REF_CTL0,
>> + FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL0, 0x8));
>> +
>> + regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0x001e);
>> +
>> + regmap_write(priv->regmap, HHI_MIPI_CNTL2,
>> + (0x26e0 << 16) | (0x459 << 0));
>> +
>> + reg = DSI_LANE_CLK;
>> + switch (priv->config.lanes) {
>> + case 4:
>> + reg |= DSI_LANE_3;
>> + fallthrough;
>> + case 3:
>> + reg |= DSI_LANE_2;
>> + fallthrough;
>> + case 2:
>> + reg |= DSI_LANE_1;
>> + fallthrough;
>> + case 1:
>> + reg |= DSI_LANE_0;
>> + break;
>> + default:
>> + reg = 0;
>> + }
>> +
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL2,
>> + HHI_MIPI_CNTL2_CH_EN,
>> + FIELD_PREP(HHI_MIPI_CNTL2_CH_EN, reg));
>> +
>> + priv->dsi_enabled = true;
>> +}
>>
>> +static void phy_dsi_analog_disable(struct phy_axg_mipi_pcie_analog_priv *priv)
>> +{
>> regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> - HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE);
>> - return 0;
>> + HHI_MIPI_CNTL0_DIF_REF_CTL1,
>> + FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0));
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, BIT(31), 0);
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> + HHI_MIPI_CNTL0_DIF_REF_CTL1, 0);
>> +
>> + regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0x6);
>> +
>> + regmap_write(priv->regmap, HHI_MIPI_CNTL2, 0x00200000);
>> +
>> + priv->dsi_enabled = false;
>> }
>>
>> -static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy)
>> +static int phy_axg_mipi_pcie_analog_configure(struct phy *phy,
>> + union phy_configure_opts *opts)
>> {
>> struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
>> + int ret;
>>
>> - /* MIPI not supported yet */
>> - if (priv->mode != PHY_TYPE_PCIE)
>> - return -EINVAL;
>> + ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
>> + if (ret)
>> + return ret;
>> +
>> + memcpy(&priv->config, opts, sizeof(priv->config));
>> +
>> + priv->dsi_configured = true;
>> +
>> + /* If PHY was already powered on, setup the DSI analog part */
>> + if (priv->powered) {
>> + /* If reconfiguring, disable & reconfigure */
>> + if (priv->dsi_enabled)
>> + phy_dsi_analog_disable(priv);
>> +
>> + usleep_range(100, 200);
>> +
>> + phy_dsi_analog_enable(priv);
>> + }
>>
>> - regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> - HHI_MIPI_CNTL0_BANDGAP, 0);
>> - regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> - HHI_MIPI_CNTL0_ENABLE, 0);
>> return 0;
>> }
>>
>> -static int phy_axg_mipi_pcie_analog_init(struct phy *phy)
>> +static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy)
>> {
>> + struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
>> +
>> + phy_bandgap_enable(priv);
>> +
>> + if (priv->dsi_configured)
>> + phy_dsi_analog_enable(priv);
>> +
>> + priv->powered = true;
>> +
>> return 0;
>> }
>>
>> -static int phy_axg_mipi_pcie_analog_exit(struct phy *phy)
>> +static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy)
>> {
>> + struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
>> +
>> + phy_bandgap_disable(priv);
>> +
>> + if (priv->dsi_enabled)
>> + phy_dsi_analog_disable(priv);
>> +
>> + priv->powered = false;
>> +
>> return 0;
>> }
>>
>> static const struct phy_ops phy_axg_mipi_pcie_analog_ops = {
>> - .init = phy_axg_mipi_pcie_analog_init,
>> - .exit = phy_axg_mipi_pcie_analog_exit,
>> + .configure = phy_axg_mipi_pcie_analog_configure,
>> .power_on = phy_axg_mipi_pcie_analog_power_on,
>> .power_off = phy_axg_mipi_pcie_analog_power_off,
>> .owner = THIS_MODULE,
>> };
>>
>> -static struct phy *phy_axg_mipi_pcie_analog_xlate(struct device *dev,
>> - struct of_phandle_args *args)
>> -{
>> - struct phy_axg_mipi_pcie_analog_priv *priv = dev_get_drvdata(dev);
>> - unsigned int mode;
>> -
>> - if (args->args_count != 1) {
>> - dev_err(dev, "invalid number of arguments\n");
>> - return ERR_PTR(-EINVAL);
>> - }
>> -
>> - mode = args->args[0];
>> -
>> - /* MIPI mode is not supported yet */
>> - if (mode != PHY_TYPE_PCIE) {
>> - dev_err(dev, "invalid phy mode select argument\n");
>> - return ERR_PTR(-EINVAL);
>> - }
>> -
>> - priv->mode = mode;
>> - return priv->phy;
>> -}
>> -
>> static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
>> {
>> struct phy_provider *phy;
>> @@ -126,27 +200,20 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
>> struct phy_axg_mipi_pcie_analog_priv *priv;
>> struct device_node *np = dev->of_node;
>> struct regmap *map;
>> - struct resource *res;
>> - void __iomem *base;
>> int ret;
>>
>> priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
>> if (!priv)
>> return -ENOMEM;
>>
>> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> - base = devm_ioremap_resource(dev, res);
>> - if (IS_ERR(base)) {
>> - dev_err(dev, "failed to get regmap base\n");
>> - return PTR_ERR(base);
>> - }
>> -
>> - map = devm_regmap_init_mmio(dev, base,
>> - &phy_axg_mipi_pcie_analog_regmap_conf);
>> + /* Get the hhi system controller node */
>> + map = syscon_node_to_regmap(of_get_parent(dev->of_node));
>> if (IS_ERR(map)) {
>> - dev_err(dev, "failed to get HHI regmap\n");
>> + dev_err(dev,
>> + "failed to get HHI regmap\n");
>> return PTR_ERR(map);
>> }
>> +
>> priv->regmap = map;
>>
>> priv->phy = devm_phy_create(dev, np, &phy_axg_mipi_pcie_analog_ops);
>> @@ -160,8 +227,7 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
>> phy_set_drvdata(priv->phy, priv);
>> dev_set_drvdata(dev, priv);
>>
>> - phy = devm_of_phy_provider_register(dev,
>> - phy_axg_mipi_pcie_analog_xlate);
>> + phy = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>>
>> return PTR_ERR_OR_ZERO(phy);
>> }
>>
More information about the linux-amlogic
mailing list