[PATCH] mailbox: avoid timer start from callback

Jerome Brunet jbrunet at baylibre.com
Fri Oct 16 14:38:45 EDT 2020


On Fri 16 Oct 2020 at 19:30, jassisinghbrar at gmail.com wrote:

> From: Jassi Brar <jaswinder.singh at linaro.org>
>
> If the txdone is done by polling, it is possible for msg_submit() to start
> the timer while txdone_hrtimer() callback is running. If the timer needs
> recheduling, it could already be enqueued by the time hrtimer_forward_now()
> is called, leading hrtimer to loudly complain.
>
> WARNING: CPU: 3 PID: 74 at kernel/time/hrtimer.c:932 hrtimer_forward+0xc4/0x110
> CPU: 3 PID: 74 Comm: kworker/u8:1 Not tainted 5.9.0-rc2-00236-gd3520067d01c-dirty #5
> Hardware name: Libre Computer AML-S805X-AC (DT)
> Workqueue: events_freezable_power_ thermal_zone_device_check
> pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
> pc : hrtimer_forward+0xc4/0x110
> lr : txdone_hrtimer+0xf8/0x118
> [...]
>
> This can be fixed by not starting the timer from the callback path. Which
> requires the timer reloading as long as any message is queued on the
> channel, and not just when current tx is not done yet.
>
> Signed-off-by: Jassi Brar <jaswinder.singh at linaro.org>
> ---
>  drivers/mailbox/mailbox.c | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mailbox/mailbox.c b/drivers/mailbox/mailbox.c
> index 0b821a5b2db8..a093a6ecaa66 100644
> --- a/drivers/mailbox/mailbox.c
> +++ b/drivers/mailbox/mailbox.c
> @@ -82,9 +82,12 @@ static void msg_submit(struct mbox_chan *chan)
>  exit:
>  	spin_unlock_irqrestore(&chan->lock, flags);
>  
> -	if (!err && (chan->txdone_method & TXDONE_BY_POLL))
> -		/* kick start the timer immediately to avoid delays */
> -		hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
> +	/* kick start the timer immediately to avoid delays */
> +	if (!err && (chan->txdone_method & TXDONE_BY_POLL)) {
> +		/* but only if not already active */

It would solve the problem I reported as well but instead of running the
check immediately (timer with value 0), we will have to wait for the
next of the timer, it is already started. IOW, there might be a delay
now. I don't know if this important for the mailbox - the existing
comments in the code suggested it was.

> +		if (!hrtimer_active(&chan->mbox->poll_hrt))
> +			hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
> +	}
>  }
>  
>  static void tx_tick(struct mbox_chan *chan, int r)
> @@ -122,11 +125,10 @@ static enum hrtimer_restart txdone_hrtimer(struct hrtimer *hrtimer)
>  		struct mbox_chan *chan = &mbox->chans[i];
>  
>  		if (chan->active_req && chan->cl) {
> +			resched = true;
>  			txdone = chan->mbox->ops->last_tx_done(chan);
>  			if (txdone)
>  				tx_tick(chan, 0);
> -			else
> -				resched = true;
>  		}
>  	}




More information about the linux-amlogic mailing list