[PATCH 15/18] dt-bindings: usb: meson-g12a-usb: Discard FL-adj property

[Serge Semin]

On Mon, Oct 12, 2020 at 05:01:43PM +0200, Neil Armstrong wrote:
> Hi,
> 
> On 12/10/2020 16:22, Serge Semin wrote:
> > On Mon, Oct 12, 2020 at 09:54:25AM +0200, Neil Armstrong wrote:
> >> Hi,
> >>
> >> On 11/10/2020 00:41, Serge Semin wrote:
> >>> An empty snps,quirk-frame-length-adjustment won't cause any change
> >>> performed by the driver. Moreover the DT schema validation will fail,
> >>> since it expects the property being assigned with some value. So just
> >>> discard the property declaration then from the example.
> >>>
> >>> Signed-off-by: Serge Semin <Sergey.Semin at baikalelectronics.ru>
> >>>
> >>> ---
> >>>
> >>> Note the same problem is in the DT source file
> >>> arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi .
> >>> ---
> >>>  .../devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml     | 1 -
> >>>  1 file changed, 1 deletion(-)
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
> >>> index 5b04a7dfa018..88184d7e26cc 100644
> >>> --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
> >>> +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
> >>> @@ -209,6 +209,5 @@ examples:
> >>>                interrupts = <30>;
> >>>                dr_mode = "host";
> >>>                snps,dis_u2_susphy_quirk;
> >>> -              snps,quirk-frame-length-adjustment;
> >>>            };
> >>>      };
> >>>
> >>
> > 
> >> Thanks for reporting this, actually the fladj must be 0x20 on this hw,
> >> but we do set this on the PHY side, so we can let the dwc3 side 0 here.
> > 
> > I can convert this patch to initializing the "snps,quirk-frame-length-adjustment"
> > property with 0x20 value instead. Since most likely I'll have to send a v2/v3/etc
> > of this patchset, that modification won't be too much work to do. What do you think?
> 

> Yes, do this please,

Ok. Shall I preserve your Acked-by tag in the new patch or you'd prefer to
review it first?

> anyway it's only an example so it's ok.

Actually examples are also validated by "make dt_binding_check". That's why I
had to fix the amlogic,meson-g12a-usb-ctrl example for at least so the new
snps,dwc3.yaml DT schema wouldn't break that full DT bindings
validation procedure.)

-Sergey

> 
> > 
> > Anyway please note, that I've fixed the improper property usage in the DT schema
> > example only. "snps,quirk-frame-length-adjustment" defined as boolean still
> > persists in the DTS file: arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi .
> > So if you ever try to validate that dts file with "make dtbs_check" scenario, it
> > will fail.
> 
> Yes, I'll push a fix to pass the dtbs_check when this is merged.
> 
> Thanks,
> Neil
> 
> > 
> > -Sergey
> > 
> >>
> >> Acked-by: Neil Armstrong <narmstrong at baylibre.com>
> >>
> >> Neil
> >>
>