[PATCH] mmc: meson-gx: remove IRQF_ONESHOT

Jerome Brunet jbrunet at baylibre.com
Fri Oct 2 12:49:15 EDT 2020


IRQF_ONESHOT was added to this driver to make sure the irq was not enabled
again until the thread part of the irq had finished doing its job.

Doing so upsets RT because, under RT, the hardirq part of the irq handler
is not migrated to a thread if the irq is claimed with IRQF_ONESHOT.
In this case, it has been reported to eventually trigger a deadlock with
the led subsystem.

Preventing RT from doing this migration was certainly not the intent, the
description of IRQF_ONESHOT does not really reflect this constraint:

 > IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
 >              Used by threaded interrupts which need to keep the
 >              irq line disabled until the threaded handler has been run.

This is exactly what this driver was trying to acheive so I'm still a bit
confused whether this is a driver or an RT issue.

Anyway, this can be solved driver side by manually disabling the IRQs
instead of the relying on the IRQF_ONESHOT. IRQF_ONESHOT may then be removed
while still making sure the irq won't trigger until the threaded part of
the handler is done.

Fixes: eb4d81127746 ("mmc: meson-gx: correct irq flag")
Reported-by: Brad Harper <bjharper at gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
 drivers/mmc/host/meson-gx-mmc.c | 47 ++++++++++++++++++++-------------
 1 file changed, 29 insertions(+), 18 deletions(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 08a3b1c05acb..effc356db904 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -101,8 +101,7 @@
 #define   IRQ_RESP_STATUS BIT(14)
 #define   IRQ_SDIO BIT(15)
 #define   IRQ_EN_MASK \
-	(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN | IRQ_RESP_STATUS |\
-	 IRQ_SDIO)
+	(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN)
 
 #define SD_EMMC_CMD_CFG 0x50
 #define SD_EMMC_CMD_ARG 0x54
@@ -170,6 +169,7 @@ struct meson_host {
 	dma_addr_t descs_dma_addr;
 
 	int irq;
+	u32 irq_en;
 
 	bool vqmmc_enabled;
 };
@@ -842,22 +842,24 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
 	struct meson_host *host = dev_id;
 	struct mmc_command *cmd;
 	struct mmc_data *data;
-	u32 irq_en, status, raw_status;
+	u32  status, raw_status;
 	irqreturn_t ret = IRQ_NONE;
 
-	irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
+	/* Disable irqs */
+	writel(0, host->regs + SD_EMMC_IRQ_EN);
+
 	raw_status = readl(host->regs + SD_EMMC_STATUS);
-	status = raw_status & irq_en;
+	status = raw_status & host->irq_en;
 
 	if (!status) {
 		dev_dbg(host->dev,
 			"Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
-			 irq_en, raw_status);
-		return IRQ_NONE;
+			 host->irq_en, raw_status);
+		goto none;
 	}
 
 	if (WARN_ON(!host) || WARN_ON(!host->cmd))
-		return IRQ_NONE;
+		goto none;
 
 	/* ack all raised interrupts */
 	writel(status, host->regs + SD_EMMC_STATUS);
@@ -908,6 +910,11 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
 	if (ret == IRQ_HANDLED)
 		meson_mmc_request_done(host->mmc, cmd->mrq);
 
+none:
+	/* Enable the irq again if the thread will not run */
+	if (ret != IRQ_WAKE_THREAD)
+		writel(host->irq_en, host->regs + SD_EMMC_IRQ_EN);
+
 	return ret;
 }
 
@@ -934,15 +941,17 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
 	struct mmc_command *next_cmd, *cmd = host->cmd;
 	struct mmc_data *data;
 	unsigned int xfer_bytes;
+	int ret = IRQ_HANDLED;
 
-	if (WARN_ON(!cmd))
-		return IRQ_NONE;
+	if (WARN_ON(!cmd)) {
+		ret = IRQ_NONE;
+		goto out;
+	}
 
 	if (cmd->error) {
 		meson_mmc_wait_desc_stop(host);
 		meson_mmc_request_done(host->mmc, cmd->mrq);
-
-		return IRQ_HANDLED;
+		goto out;
 	}
 
 	data = cmd->data;
@@ -959,7 +968,10 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
 	else
 		meson_mmc_request_done(host->mmc, cmd->mrq);
 
-	return IRQ_HANDLED;
+out:
+	/* Re-enable the irqs */
+	writel(host->irq_en, host->regs + SD_EMMC_IRQ_EN);
+	return ret;
 }
 
 /*
@@ -1133,13 +1145,12 @@ static int meson_mmc_probe(struct platform_device *pdev)
 
 	/* clear, ack and enable interrupts */
 	writel(0, host->regs + SD_EMMC_IRQ_EN);
-	writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN,
-	       host->regs + SD_EMMC_STATUS);
-	writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN,
-	       host->regs + SD_EMMC_IRQ_EN);
+	host->irq_en = IRQ_EN_MASK;
+	writel(host->irq_en, host->regs + SD_EMMC_STATUS);
+	writel(host->irq_en, host->regs + SD_EMMC_IRQ_EN);
 
 	ret = request_threaded_irq(host->irq, meson_mmc_irq,
-				   meson_mmc_irq_thread, IRQF_ONESHOT,
+				   meson_mmc_irq_thread, 0,
 				   dev_name(&pdev->dev), host);
 	if (ret)
 		goto err_init_clk;
-- 
2.25.4




More information about the linux-amlogic mailing list