[PATCH RFC v2 2/5] net: stmmac: dwmac-meson8b: fix enabling the timing-adjustment clock

Florian Fainelli f.fainelli at gmail.com
Tue Nov 17 13:34:04 EST 2020

On 11/15/20 10:52 AM, Martin Blumenstingl wrote:
> The timing-adjustment clock only has to be enabled when a) there is a
> 2ns RX delay configured using device-tree and b) the phy-mode indicates
> that the RX delay should be enabled.
> Only enable the RX delay if both are true, instead of (by accident) also
> enabling it when there's the 2ns RX delay configured but the phy-mode
> incicates that the RX delay is not used.
> Fixes: 9308c47640d515 ("net: stmmac: dwmac-meson8b: add support for the RX delay configuration")
> Reported-by: Andrew Lunn <andrew at lunn.ch>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>

Reviewed-by: Florian Fainelli <f.fainelli at gmail.com>

More information about the linux-amlogic mailing list