[PATCH v2 2/4] media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit

Hans Verkuil hverkuil at xs4all.nl
Wed Nov 11 09:20:21 EST 2020


On 30/10/2020 15:37, Neil Armstrong wrote:
> The GE2D is a 2D accelerator with various features like configurable blitter
> with alpha blending, frame rotation, scaling, format conversion and colorspace
> conversion.
> 
> The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
> - 0, 90, 180, 270deg rotation
> - horizontal/vertical flipping
> - source cropping
> - destination compositing
> - 32bit/24bit/16bit format conversion
> 
> This adds the support for the GE2D version found in the AXG SoCs Family.
> 
> The missing features are:
> - Source scaling
> - Colorspace conversion
> - Advanced alpha blending & blitting options
> 
> Is passes v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t
> 
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
>  drivers/media/platform/Kconfig                |   13 +
>  drivers/media/platform/Makefile               |    2 +
>  drivers/media/platform/meson/ge2d/Makefile    |    3 +
>  drivers/media/platform/meson/ge2d/ge2d-regs.h |  360 ++++++
>  drivers/media/platform/meson/ge2d/ge2d.c      | 1105 +++++++++++++++++
>  5 files changed, 1483 insertions(+)
>  create mode 100644 drivers/media/platform/meson/ge2d/Makefile
>  create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h
>  create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c
> 
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index a3cb104956d5..0522a5a76b86 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -274,6 +274,19 @@ config VIDEO_MEM2MEM_DEINTERLACE
>  	help
>  	    Generic deinterlacing V4L2 driver.
>  
> +config VIDEO_MESON_GE2D
> +	tristate "Amlogic 2D Graphic Acceleration Unit"
> +	depends on VIDEO_DEV && VIDEO_V4L2
> +	depends on ARCH_MESON || COMPILE_TEST
> +	select VIDEOBUF2_DMA_CONTIG
> +	select V4L2_MEM2MEM_DEV
> +	help
> +	  This is a v4l2 driver for Amlogic GE2D 2D graphics accelerator.
> +	  GE2D is a standalone 2D graphic acceleration unit, with color converter,
> +	  image scaling, BitBLT & alpha blending operations.
> +
> +	  To compile this driver as a module choose m here.
> +
>  config VIDEO_SAMSUNG_S5P_G2D
>  	tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
>  	depends on VIDEO_DEV && VIDEO_V4L2
> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> index 62b6cdc8c730..d47e0dcc65d7 100644
> --- a/drivers/media/platform/Makefile
> +++ b/drivers/media/platform/Makefile
> @@ -80,3 +80,5 @@ obj-$(CONFIG_VIDEO_QCOM_CAMSS)		+= qcom/camss/
>  obj-$(CONFIG_VIDEO_QCOM_VENUS)		+= qcom/venus/
>  
>  obj-y					+= sunxi/
> +
> +obj-$(CONFIG_VIDEO_MESON_GE2D)		+= meson/ge2d/
> diff --git a/drivers/media/platform/meson/ge2d/Makefile b/drivers/media/platform/meson/ge2d/Makefile
> new file mode 100644
> index 000000000000..450586df27d7
> --- /dev/null
> +++ b/drivers/media/platform/meson/ge2d/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +obj-$(CONFIG_VIDEO_MESON_GE2D) += ge2d.o
> diff --git a/drivers/media/platform/meson/ge2d/ge2d-regs.h b/drivers/media/platform/meson/ge2d/ge2d-regs.h
> new file mode 100644
> index 000000000000..2a76dd4c0ccb
> --- /dev/null
> +++ b/drivers/media/platform/meson/ge2d/ge2d-regs.h
> @@ -0,0 +1,360 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright (C) 2020 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + * Copyright (C) 2017 Amlogic, Inc. All rights reserved.
> + */
> +
> +#ifndef __GE2D_REGS__
> +#define __GE2D_REGS__
> +
> +/* Registers starts at (GE2D_REG(0x8a0 * 4) */
> +#define GE2D_REG(x) ((0x8a0 + (x)) * 4)
> +
> +#define GE2D_GEN_CTRL0 GE2D_REG(0x00)
> +
> +#define GE2D_DST_BYTEMASK_ONLY		BIT(31)
> +#define GE2D_DST_BITMASK_EN		BIT(30)
> +#define GE2D_SRC2_KEY_EN		BIT(29)
> +#define GE2D_SRC2_KEY_MODE		BIT(28)
> +#define GE2D_SRC1_KEY_EN		BIT(27)
> +#define GE2D_SRC1_KEY_MODE		BIT(26)
> +#define GE2D_DST1_8B_MODE_SEL		GENMASK(25, 24)
> +#define GE2D_DST_CLIP_MODE		BIT(23)
> +#define GE2D_SRC2_8B_MODE_SEL		GENMASK(16, 15)
> +#define GE2D_SRC2_FILL_MODE		BIT(14)
> +#define GE2D_SRC2_PIC_STRUCT		GENMASK(13, 12)
> +#define GE2D_SRC2_X_YC_RATIO		BIT(11)
> +#define GE2D_SRC1_8B_MODE_SEL		GENMASK(6, 5)
> +#define GE2D_SRC1_FILL_MODE		BIT(4)
> +#define GE2D_SRC1_LUT_EN		BIT(3)
> +#define GE2D_SRC1_PIC_STRUCT		GENMASK(2, 1)
> +
> +#define GE2D_GEN_CTRL1 GE2D_REG(0x01)
> +
> +#define GE2D_SOFT_RST			BIT(31)
> +#define GE2D_DST_WRITE_RESP_CNT_RST	BIT(30)
> +#define GE2D_DST_WRITE_RESP_CNT_ADD_DIS	BIT(29)
> +#define GE2D_COLOR_CONVERSION_MODE1	BIT(26)
> +#define GE2D_INTERRUPT_CTRL		GENMASK(25, 24)
> +#define GE2D_SRC2_BURST_SIZE_CTRL	GENMASK(23, 22)
> +#define GE2D_SRC1_BURST_SIZE_CTRL	GENMASK(21, 16)
> +#define GE2D_DST1_PIC_STRUCT		GENMASK(15, 14)
> +#define GE2D_SRC_RD_CTRL		GENMASK(13, 12)
> +#define GE2D_DST2_URGENT_EN		BIT(11)
> +#define GE2D_SRC1_URGENT_EN		BIT(10)
> +#define GE2D_SRC2_URGENT_EN		BIT(9)
> +#define GE2D_DST1_URGENT_EN		BIT(8)
> +#define GE2D_SRC1_GB_ALPHA		GENMASK(7, 0)
> +
> +#define GE2D_GEN_CTRL2 GE2D_REG(0x02)
> +
> +#define GE2D_ALPHA_CONVERSION_MODE0	BIT(31)
> +#define GE2D_COLOR_CONVERSION_MODE0	BIT(30)
> +#define GE2D_SRC1_GB_ALPHA_EN		BIT(29)
> +#define GE2D_DST1_COLOR_ROUND_MODE	BIT(28)
> +#define GE2D_SRC2_COLOR_EXPAND_MODE	BIT(27)
> +#define GE2D_SRC2_ALPHA_EXPAND_MODE	BIT(26)
> +#define GE2D_SRC1_COLOR_EXPAND_MODE	BIT(25)
> +#define GE2D_SRC1_ALPHA_EXPAND_MODE	BIT(24)
> +#define GE2D_DST_LITTLE_ENDIAN		BIT(23)
> +#define GE2D_DST1_COLOR_MAP		GENMASK(22, 19)
> +#define GE2D_ALU_MULT_MODE		BIT(18)
> +#define GE2D_DST1_FORMAT		GENMASK(17, 16)
> +#define GE2D_SRC2_LITTLE_ENDIAN		BIT(15)
> +#define GE2D_SRC2_COLOR_MAP		GENMASK(14, 11)
> +#define GE2D_ALPHA_CONVERSION_MODE1	BIT(10)
> +#define GE2D_SRC2_FORMAT		GENMASK(9, 8)
> +#define GE2D_SRC1_LITTLE_ENDIAN		BIT(7)
> +#define GE2D_SRC1_COLOR_MAP		GENMASK(6, 3)
> +#define GE2D_SRC1_DEEPCOLOR		BIT(2)
> +#define GE2D_SRC1_FORMAT		GENMASK(1, 0)
> +
> +#define GE2D_FORMAT_8BIT	0
> +#define GE2D_FORMAT_16BIT	1
> +#define GE2D_FORMAT_24BIT	2
> +#define GE2D_FORMAT_32BIT	3
> +
> +/* 16 bit */
> +#define GE2D_COLOR_MAP_YUV422		0
> +#define GE2D_COLOR_MAP_RGB655		1
> +#define GE2D_COLOR_MAP_YUV655		1
> +#define GE2D_COLOR_MAP_RGB844		2
> +#define GE2D_COLOR_MAP_YUV844		2
> +#define GE2D_COLOR_MAP_RGBA6442		3
> +#define GE2D_COLOR_MAP_YUVA6442		3
> +#define GE2D_COLOR_MAP_RGBA4444		4
> +#define GE2D_COLOR_MAP_YUVA4444		4
> +#define GE2D_COLOR_MAP_RGB565		5
> +#define GE2D_COLOR_MAP_YUV565		5
> +#define GE2D_COLOR_MAP_ARGB4444		6
> +#define GE2D_COLOR_MAP_AYUV4444		6
> +#define GE2D_COLOR_MAP_ARGB1555		7
> +#define GE2D_COLOR_MAP_AYUV1555		7
> +#define GE2D_COLOR_MAP_RGBA4642		8
> +#define GE2D_COLOR_MAP_YUVA4642		8
> +
> +/* 24 bit */
> +#define GE2D_COLOR_MAP_RGB888		0
> +#define GE2D_COLOR_MAP_YUV444		0
> +#define GE2D_COLOR_MAP_RGBA5658		1
> +#define GE2D_COLOR_MAP_YUVA5658		1
> +#define GE2D_COLOR_MAP_ARGB8565		2
> +#define GE2D_COLOR_MAP_AYUV8565		2
> +#define GE2D_COLOR_MAP_RGBA6666		3
> +#define GE2D_COLOR_MAP_YUVA6666		3
> +#define GE2D_COLOR_MAP_ARGB6666		4
> +#define GE2D_COLOR_MAP_AYUV6666		4
> +#define GE2D_COLOR_MAP_BGR888		5
> +#define GE2D_COLOR_MAP_VUY888		5
> +
> +/* 32 bit */
> +#define GE2D_COLOR_MAP_RGBA8888		0
> +#define GE2D_COLOR_MAP_YUVA8888		0
> +#define GE2D_COLOR_MAP_ARGB8888		1
> +#define GE2D_COLOR_MAP_AYUV8888		1
> +#define GE2D_COLOR_MAP_ABGR8888		2
> +#define GE2D_COLOR_MAP_AVUY8888		2
> +#define GE2D_COLOR_MAP_BGRA8888		3
> +#define GE2D_COLOR_MAP_VUYA8888		3
> +
> +#define GE2D_CMD_CTRL GE2D_REG(0x03)
> +
> +#define GE2D_SRC2_FILL_COLOR_EN		BIT(9)
> +#define GE2D_SRC1_FILL_COLOR_EN		BIT(8)
> +#define GE2D_DST_XY_SWAP		BIT(7)
> +#define GE2D_DST_X_REV			BIT(6)
> +#define GE2D_DST_Y_REV			BIT(5)
> +#define GE2D_SRC2_X_REV			BIT(4)
> +#define GE2D_SRC2_Y_REV			BIT(3)
> +#define GE2D_SRC1_X_REV			BIT(2)
> +#define GE2D_SRC1_Y_REV			BIT(1)
> +#define GE2D_CBUS_CMD_WR		BIT(0)
> +
> +#define GE2D_STATUS0 GE2D_REG(0x04)
> +
> +#define GE2D_DST_WRITE_RSP_CNT		GENMASK(28, 17)
> +#define GE2D_DP_STATUS			GENMASK(16, 7)
> +#define GE2D_R1CMD_RDY			BIT(6)
> +#define GE2D_R2CMD_RDY			BIT(5)
> +#define GE2D_PDPCMD_VALID		BIT(4)
> +#define GE2D_DPCMD_RDY			BIT(3)
> +#define GE2D_BUF_CMD_VALID		BIT(2)
> +#define GE2D_CURR_CMD_VALID		BIT(1)
> +#define GE2D_GE2D_BUSY			BIT(0)
> +
> +#define GE2D_STATUS1 GE2D_REG(0x05)
> +
> +#define GE2D_WR_DST1_STATUS		GENMASK(29, 16)
> +#define GE2D_RD_SRC2_FIFO_EMPTY		BIT(15)
> +#define GE2D_RD_SRC2_FIFO_OVERFLOW	BIT(14)
> +#define GE2D_RD_SRC2_STATE_Y		GENMASK(13, 12)
> +#define GE2D_RD_SRC2_WIN_ERR		BIT(11)
> +#define GE2D_RD_SRC2_CMD_BUSY		BIT(10)
> +#define GE2D_RD_SRC1_FIFO_EMPTY		BIT(9)
> +#define GE2D_RD_SRC1_FIFO_OVERFLOW	BIT(8)
> +#define GE2D_RD_SRC1_STATE_CR		GENMASK(7, 6)
> +#define GE2D_RD_SRC1_STATE_CB		GENMASK(5, 4)
> +#define GE2D_RD_SRC1_STATE_Y		GENMASK(3, 2)
> +#define GE2D_RD_SRC1_WIN_ERR		BIT(1)
> +#define GE2D_RD_SRC1_CMD_BUSY		BIT(0)
> +
> +#define GE2D_SRC1_DEF_COLOR GE2D_REG(0x06)
> +
> +#define GE2D_COLOR_R_Y			GENMASK(31, 24)
> +#define GE2D_COLOR_B_CB			GENMASK(23, 16)
> +#define GE2D_COLOR_B_CR			GENMASK(15, 8)
> +#define GE2D_COLOR_ALPHA		GENMASK(7, 0)
> +
> +#define GE2D_SRC1_CLIPX_START_END GE2D_REG(0x07)
> +
> +#define GE2D_START_EXTRA	BIT(31) /* For GE2D_SRC1_CLIPX/Y_START_END */
> +#define GE2D_START_EXTRA0	BIT(30)	/* For GE2D_SRC1_X/Y_START_END */
> +#define GE2D_START		GENMASK(28, 16)
> +#define GE2D_END_EXTRA		BIT(15) /* For GE2D_SRC1_CLIPX/Y_START_END */
> +#define GE2D_END_EXTRA0		BIT(14)	/* For GE2D_SRC1_X/Y_START_END */
> +#define GE2D_END		GENMASK(12, 0)
> +
> +#define GE2D_SRC1_CLIPY_START_END GE2D_REG(0x08)
> +#define GE2D_SRC1_CANVAS GE2D_REG(0x09)
> +
> +#define GE2D_SRC1_CANVAS_ADDR	GENMASK(31, 24)
> +
> +#define GE2D_SRC1_X_START_END GE2D_REG(0x0a)
> +#define GE2D_SRC1_Y_START_END GE2D_REG(0x0b)
> +#define GE2D_SRC1_LUT_ADDR GE2D_REG(0x0c)
> +
> +#define GE2D_LUT_READ		BIT(8)
> +#define GE2D_LUT_ADDR		GENMASK(7, 0)
> +
> +#define GE2D_SRC1_LUT_DAT GE2D_REG(0x0d)
> +#define GE2D_SRC1_FMT_CTRL GE2D_REG(0x0e)
> +#define GE2D_SRC2_DEF_COLOR GE2D_REG(0x0f)
> +#define GE2D_SRC2_CLIPX_START_END GE2D_REG(0x10)
> +#define GE2D_SRC2_CLIPY_START_END GE2D_REG(0x11)
> +#define GE2D_SRC2_X_START_END GE2D_REG(0x12)
> +#define GE2D_SRC2_Y_START_END GE2D_REG(0x13)
> +#define GE2D_DST_CLIPX_START_END GE2D_REG(0x14)
> +#define GE2D_DST_CLIPY_START_END GE2D_REG(0x15)
> +#define GE2D_DST_X_START_END GE2D_REG(0x16)
> +#define GE2D_DST_Y_START_END GE2D_REG(0x17)
> +#define GE2D_SRC2_DST_CANVAS GE2D_REG(0x18)
> +
> +#define GE2D_DST2_CANVAS_ADDR	GENMASK(23, 16)
> +#define GE2D_SRC2_CANVAS_ADDR	GENMASK(15, 8)
> +#define GE2D_DST1_CANVAS_ADDR	GENMASK(7, 0)
> +
> +#define GE2D_VSC_START_PHASE_STEP GE2D_REG(0x19)
> +#define GE2D_VSC_PHASE_SLOPE GE2D_REG(0x1a)
> +#define GE2D_VSC_INI_CTRL GE2D_REG(0x1b)
> +#define GE2D_HSC_START_PHASE_STEP GE2D_REG(0x1c)
> +#define GE2D_HSC_PHASE_SLOPE GE2D_REG(0x1d)
> +#define GE2D_HSC_INI_CTRL GE2D_REG(0x1e)
> +#define GE2D_HSC_ADV_CTRL GE2D_REG(0x1f)
> +#define GE2D_SC_MISC_CTRL GE2D_REG(0x20)
> +#define GE2D_VSC_NRND_POINT GE2D_REG(0x21)
> +#define GE2D_VSC_NRND_PHASE GE2D_REG(0x22)
> +#define GE2D_HSC_NRND_POINT GE2D_REG(0x23)
> +#define GE2D_HSC_NRND_PHASE GE2D_REG(0x24)
> +#define GE2D_MATRIX_PRE_OFFSET GE2D_REG(0x25)
> +#define GE2D_MATRIX_COEF00_01 GE2D_REG(0x26)
> +#define GE2D_MATRIX_COEF02_10 GE2D_REG(0x27)
> +#define GE2D_MATRIX_COEF11_12 GE2D_REG(0x28)
> +#define GE2D_MATRIX_COEF20_21 GE2D_REG(0x29)
> +#define GE2D_MATRIX_COEF22_CTRL GE2D_REG(0x2a)
> +#define GE2D_MATRIX_OFFSET GE2D_REG(0x2b)
> +#define GE2D_ALU_OP_CTRL GE2D_REG(0x2c)
> +
> +#define GE2D_SRC1_COLOR_MULT_ALPHA_SEL	GENMASK(26, 25)
> +#define GE2D_SRC2_COLOR_MULT_ALPHA_SEL	BIT(24)
> +#define GE2D_ALU_BLEND_MODE		GENMASK(22, 20)
> +
> +#define OPERATION_ADD           0    /* Cd = Cs*Fs+Cd*Fd */
> +#define OPERATION_SUB           1    /* Cd = Cs*Fs-Cd*Fd */
> +#define OPERATION_REVERSE_SUB   2    /* Cd = Cd*Fd-Cs*Fs */
> +#define OPERATION_MIN           3    /* Cd = Min(Cd*Fd,Cs*Fs) */
> +#define OPERATION_MAX           4    /* Cd = Max(Cd*Fd,Cs*Fs) */
> +#define OPERATION_LOGIC         5
> +
> +#define GE2D_ALU_SRC_COLOR_BLEND_FACTOR	GENMASK(19, 16)
> +#define GE2D_ALU_DST_COLOR_BLEND_FACTOR	GENMASK(15, 12)
> +
> +#define COLOR_FACTOR_ZERO                     0
> +#define COLOR_FACTOR_ONE                      1
> +#define COLOR_FACTOR_SRC_COLOR                2
> +#define COLOR_FACTOR_ONE_MINUS_SRC_COLOR      3
> +#define COLOR_FACTOR_DST_COLOR                4
> +#define COLOR_FACTOR_ONE_MINUS_DST_COLOR      5
> +#define COLOR_FACTOR_SRC_ALPHA                6
> +#define COLOR_FACTOR_ONE_MINUS_SRC_ALPHA      7
> +#define COLOR_FACTOR_DST_ALPHA                8
> +#define COLOR_FACTOR_ONE_MINUS_DST_ALPHA      9
> +#define COLOR_FACTOR_CONST_COLOR              10
> +#define COLOR_FACTOR_ONE_MINUS_CONST_COLOR    11
> +#define COLOR_FACTOR_CONST_ALPHA              12
> +#define COLOR_FACTOR_ONE_MINUS_CONST_ALPHA    13
> +#define COLOR_FACTOR_SRC_ALPHA_SATURATE       14
> +
> +#define GE2D_ALU_OPERATION_LOGIC	GENMASK(15, 12)
> +
> +#define LOGIC_OPERATION_CLEAR       0
> +#define LOGIC_OPERATION_COPY        1
> +#define LOGIC_OPERATION_NOOP        2
> +#define LOGIC_OPERATION_SET         3
> +#define LOGIC_OPERATION_COPY_INVERT 4
> +#define LOGIC_OPERATION_INVERT      5
> +#define LOGIC_OPERATION_AND_REVERSE 6
> +#define LOGIC_OPERATION_OR_REVERSE  7
> +#define LOGIC_OPERATION_AND         8
> +#define LOGIC_OPERATION_OR          9
> +#define LOGIC_OPERATION_NAND        10
> +#define LOGIC_OPERATION_NOR         11
> +#define LOGIC_OPERATION_XOR         12
> +#define LOGIC_OPERATION_EQUIV       13
> +#define LOGIC_OPERATION_AND_INVERT  14
> +#define LOGIC_OPERATION_OR_INVERT   15
> +
> +#define GE2D_ALU_ALPHA_BLEND_MODE	GENMASK(10, 8)
> +#define GE2D_ALU_SRC_ALPHA_BLEND_FACTOR	GENMASK(7, 4)
> +#define GE2D_ALU_DST_ALPHA_BLEND_FACTOR	GENMASK(3, 0)
> +
> +#define ALPHA_FACTOR_ZERO                     0
> +#define ALPHA_FACTOR_ONE                      1
> +#define ALPHA_FACTOR_SRC_ALPHA                2
> +#define ALPHA_FACTOR_ONE_MINUS_SRC_ALPHA      3
> +#define ALPHA_FACTOR_DST_ALPHA                4
> +#define ALPHA_FACTOR_ONE_MINUS_DST_ALPHA      5
> +#define ALPHA_FACTOR_CONST_ALPHA              6
> +#define ALPHA_FACTOR_ONE_MINUS_CONST_ALPHA    7
> +
> +#define GE2D_ALU_ALPHA_OPERATION_LOGIC	GENMASK(3, 0)
> +
> +#define GE2D_ALU_COLOR_OP(__op, __src_factor, __dst_factor) \
> +	(FIELD_PREP(GE2D_ALU_BLEND_MODE, __op) | \
> +	 FIELD_PREP(GE2D_ALU_SRC_COLOR_BLEND_FACTOR, __src_factor) | \
> +	 FIELD_PREP(GE2D_ALU_DST_COLOR_BLEND_FACTOR, __dst_factor))
> +
> +#define GE2D_ALU_DO_COLOR_OPERATION_LOGIC(__op, __src_factor) \
> +	GE2D_ALU_COLOR_OP(OPERATION_LOGIC, __src_factor, __op)
> +
> +#define GE2D_ALU_ALPHA_OP(__op, __src_factor, __dst_factor) \
> +	(FIELD_PREP(GE2D_ALU_ALPHA_BLEND_MODE, __op) | \
> +	 FIELD_PREP(GE2D_ALU_SRC_ALPHA_BLEND_FACTOR, __src_factor) | \
> +	 FIELD_PREP(GE2D_ALU_DST_ALPHA_BLEND_FACTOR, __dst_factor))
> +
> +#define GE2D_ALU_DO_ALPHA_OPERATION_LOGIC(__op, __src_factor) \
> +	GE2D_ALU_ALPHA_OP(OPERATION_LOGIC, __src_factor, __op)
> +
> +#define GE2D_ALU_CONST_COLOR GE2D_REG(0x2d)
> +#define GE2D_SRC1_KEY GE2D_REG(0x2e)
> +#define GE2D_SRC1_KEY_MASK GE2D_REG(0x2f)
> +#define GE2D_SRC2_KEY GE2D_REG(0x30)
> +#define GE2D_SRC2_KEY_MASK GE2D_REG(0x31)
> +#define GE2D_DST_BITMASK GE2D_REG(0x32)
> +#define GE2D_DP_ONOFF_CTRL GE2D_REG(0x33)
> +#define GE2D_SCALE_COEF_IDX GE2D_REG(0x34)
> +#define GE2D_SCALE_COEF GE2D_REG(0x35)
> +#define GE2D_SRC_OUTSIDE_ALPHA GE2D_REG(0x36)
> +#define GE2D_ANTIFLICK_CTRL0 GE2D_REG(0x38)
> +#define GE2D_ANTIFLICK_CTRL1 GE2D_REG(0x39)
> +#define GE2D_ANTIFLICK_COLOR_FILT0 GE2D_REG(0x3a)
> +#define GE2D_ANTIFLICK_COLOR_FILT1 GE2D_REG(0x3b)
> +#define GE2D_ANTIFLICK_COLOR_FILT2 GE2D_REG(0x3c)
> +#define GE2D_ANTIFLICK_COLOR_FILT3 GE2D_REG(0x3d)
> +#define GE2D_ANTIFLICK_ALPHA_FILT0 GE2D_REG(0x3e)
> +#define GE2D_ANTIFLICK_ALPHA_FILT1 GE2D_REG(0x3f)
> +#define GE2D_ANTIFLICK_ALPHA_FILT2 GE2D_REG(0x40)
> +#define GE2D_ANTIFLICK_ALPHA_FILT3 GE2D_REG(0x41)
> +#define GE2D_SRC1_RANGE_MAP_Y_CTRL GE2D_REG(0x43)
> +#define GE2D_SRC1_RANGE_MAP_CB_CTRL GE2D_REG(0x44)
> +#define GE2D_SRC1_RANGE_MAP_CR_CTRL GE2D_REG(0x45)
> +#define GE2D_ARB_BURST_NUM GE2D_REG(0x46)
> +#define GE2D_TID_TOKEN GE2D_REG(0x47)
> +#define GE2D_GEN_CTRL3 GE2D_REG(0x48)
> +
> +#define GE2D_DST2_BYTEMASK_VAL		GENMASK(31, 28)
> +#define GE2D_DST2_PIC_STRUCT		GENMASK(27, 26)
> +#define GE2D_DST2_8B_MODE_SEL		GENMASK(25, 24)
> +#define GE2D_DST2_COLOR_MAP		GENMASK(22, 19)
> +#define GE2D_DST2_FORMAT		GENMASK(17, 16)
> +#define GE2D_DST2_COLOR_ROUND_MODE	BIT(14)
> +#define GE2D_DST2_X_DISCARD_MODE	GENMASK(13, 12)
> +#define GE2D_DST2_Y_DISCARD_MODE	GENMASK(11, 10)
> +#define GE2D_DST2_ENABLE		BIT(8)
> +#define GE2D_DST1_X_DISCARD_MODE	GENMASK(5, 4)
> +#define GE2D_DST1_Y_DISCARD_MODE	GENMASK(3, 2)
> +#define GE2D_DST1_ENABLE		BIT(0)
> +
> +#define GE2D_STATUS2 GE2D_REG(0x49)
> +#define GE2D_GEN_CTRL4 GE2D_REG(0x4a)
> +#define GE2D_DST1_BADDR_CTRL  GE2D_REG(0x51)
> +#define GE2D_DST1_STRIDE_CTRL GE2D_REG(0x52)
> +
> +#define GE2D_STRIDE_SIZE	GENMASK(19, 0)
> +
> +#define GE2D_SRC1_BADDR_CTRL  GE2D_REG(0x53)
> +#define GE2D_SRC1_STRIDE_CTRL GE2D_REG(0x54)
> +#define GE2D_SRC2_BADDR_CTRL  GE2D_REG(0x55)
> +#define GE2D_SRC2_STRIDE_CTRL GE2D_REG(0x56)
> +
> +#endif /* __GE2D_REGS__ */
> diff --git a/drivers/media/platform/meson/ge2d/ge2d.c b/drivers/media/platform/meson/ge2d/ge2d.c
> new file mode 100644
> index 000000000000..439bdc5151fa
> --- /dev/null
> +++ b/drivers/media/platform/meson/ge2d/ge2d.c
> @@ -0,0 +1,1105 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2020 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/reset.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/timer.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/platform_device.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/v4l2-mem2mem.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/videobuf2-v4l2.h>
> +#include <media/videobuf2-dma-contig.h>
> +
> +#include "ge2d-regs.h"
> +
> +#define GE2D_NAME	"meson-ge2d"
> +
> +#define DEFAULT_WIDTH	100
> +#define DEFAULT_HEIGHT	100
> +
> +#define MAX_WIDTH	8191
> +#define MAX_HEIGHT	8191
> +
> +/*
> + * Missing features:
> + * - Scaling
> + * - Simple 1/2 vertical scaling
> + * - YUV input support
> + * - Source global alpha
> + * - Colorspace conversion
> + */
> +
> +struct ge2d_fmt {
> +	u32 fourcc;
> +	bool alpha;
> +	bool le;
> +	unsigned int depth;
> +	unsigned int hw_fmt;
> +	unsigned int hw_map;
> +};
> +
> +struct ge2d_frame {
> +	struct vb2_v4l2_buffer *buf;
> +
> +	/* Image Format */
> +	struct v4l2_pix_format pix_fmt;
> +
> +	/* Crop */
> +	struct v4l2_rect crop;
> +
> +	/* Image format */
> +	const struct ge2d_fmt *fmt;
> +};
> +
> +struct ge2d_ctx {
> +	struct v4l2_fh fh;
> +	struct meson_ge2d *ge2d;
> +	struct ge2d_frame in;
> +	struct ge2d_frame out;
> +	struct v4l2_ctrl_handler ctrl_handler;
> +
> +	bool streamon_out, streamon_cap;
> +	unsigned long sequence_out, sequence_cap;
> +
> +	/* Control values */
> +	u32 hflip;
> +	u32 vflip;
> +	u32 xy_swap;
> +};
> +
> +struct meson_ge2d {
> +	struct v4l2_device v4l2_dev;
> +	struct v4l2_m2m_dev *m2m_dev;
> +	struct video_device *vfd;
> +
> +	struct device *dev;
> +	struct regmap *map;
> +	struct clk *clk;
> +
> +	/* vb2 queue lock */
> +	struct mutex mutex;
> +	/* device access spinlock */
> +	spinlock_t ctrl_lock;
> +
> +	struct ge2d_ctx *curr;
> +};
> +
> +static void vidioc_setup_cap_fmt(struct ge2d_ctx *ctx, struct v4l2_pix_format *f);
> +
> +#define FMT(_fourcc, _alpha, _depth, _map)		\
> +{							\
> +	.fourcc = _fourcc,				\
> +	.alpha = (_alpha),				\
> +	.depth = (_depth),				\
> +	.hw_fmt = GE2D_FORMAT_ ## _depth ## BIT,	\
> +	.hw_map = GE2D_COLOR_MAP_ ## _map,		\
> +}
> +
> +/* TOFIX Handle the YUV input formats */
> +static const struct ge2d_fmt formats[] = {
> +	/*  FOURCC Alpha  HW FMT  HW MAP */
> +	FMT(V4L2_PIX_FMT_XRGB32, false, 32, BGRA8888),
> +	FMT(V4L2_PIX_FMT_RGB32, true, 32, BGRA8888),
> +	FMT(V4L2_PIX_FMT_ARGB32, true, 32, BGRA8888),
> +	FMT(V4L2_PIX_FMT_RGBX32, false, 32, ABGR8888),
> +	FMT(V4L2_PIX_FMT_RGBA32, true, 32, ABGR8888),
> +	FMT(V4L2_PIX_FMT_BGRX32, false, 32, RGBA8888),
> +	FMT(V4L2_PIX_FMT_BGRA32, true, 32, RGBA8888),
> +	FMT(V4L2_PIX_FMT_BGR32, true, 32, ARGB8888),
> +	FMT(V4L2_PIX_FMT_ABGR32, true, 32, ARGB8888),
> +	FMT(V4L2_PIX_FMT_XBGR32, false, 32, ARGB8888),
> +
> +	FMT(V4L2_PIX_FMT_RGB24, false, 24, BGR888),
> +	FMT(V4L2_PIX_FMT_BGR24, false, 24, RGB888),
> +
> +	FMT(V4L2_PIX_FMT_XRGB555X, false, 16, ARGB1555),
> +	FMT(V4L2_PIX_FMT_ARGB555X, true, 16, ARGB1555),
> +	FMT(V4L2_PIX_FMT_RGB565, false, 16, RGB565),
> +	FMT(V4L2_PIX_FMT_RGBX444, false, 16, RGBA4444),
> +	FMT(V4L2_PIX_FMT_RGBA444, true, 16, RGBA4444),
> +	FMT(V4L2_PIX_FMT_XRGB444, false, 16, ARGB4444),
> +	FMT(V4L2_PIX_FMT_ARGB444, true, 16, ARGB4444),
> +};
> +
> +#define NUM_FORMATS ARRAY_SIZE(formats)
> +
> +static const struct ge2d_fmt *find_fmt(struct v4l2_format *f)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < NUM_FORMATS; i++) {
> +		if (formats[i].fourcc == f->fmt.pix.pixelformat)
> +			return &formats[i];
> +	}
> +
> +	/*
> +	 * TRY_FMT/S_FMT should never return an error when the requested format
> +	 * is not supported. Drivers should always return a valid format,
> +	 * preferably a format that is as widely supported by applications as
> +	 * possible.
> +	 */
> +	return &formats[0];
> +}
> +
> +static struct ge2d_frame *get_frame(struct ge2d_ctx *ctx,
> +				    enum v4l2_buf_type type)
> +{
> +	switch (type) {
> +	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
> +		return &ctx->in;
> +	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
> +		return &ctx->out;
> +	default:
> +		return ERR_PTR(-EINVAL);

I wouldn't mess with returning an error pointer here. For the default
case just add a WARN_ON and return &ctx->in or ->out.

It's really a driver bug if you end up there.

> +	}
> +}
> +
> +static void ge2d_hw_start(struct meson_ge2d *ge2d)
> +{
> +	struct ge2d_ctx *ctx = ge2d->curr;
> +	u32 reg;
> +
> +	/* Reset */
> +	regmap_update_bits(ge2d->map, GE2D_GEN_CTRL1,
> +			   GE2D_SOFT_RST, GE2D_SOFT_RST);
> +	regmap_update_bits(ge2d->map, GE2D_GEN_CTRL1,
> +			   GE2D_SOFT_RST, 0);
> +
> +	usleep_range(100, 200);
> +
> +	/* Implement CANVAS for non-AXG */
> +	regmap_write(ge2d->map, GE2D_SRC1_BADDR_CTRL,
> +		     (vb2_dma_contig_plane_dma_addr(&ctx->in.buf->vb2_buf, 0) + 7) >> 3);
> +	regmap_write(ge2d->map, GE2D_SRC1_STRIDE_CTRL,
> +		     (ctx->in.pix_fmt.bytesperline + 7) >> 3);
> +	regmap_write(ge2d->map, GE2D_SRC2_BADDR_CTRL,
> +		     (vb2_dma_contig_plane_dma_addr(&ctx->out.buf->vb2_buf, 0) + 7) >> 3);
> +	regmap_write(ge2d->map, GE2D_SRC2_STRIDE_CTRL,
> +		     (ctx->out.pix_fmt.bytesperline + 7) >> 3);
> +	regmap_write(ge2d->map, GE2D_DST1_BADDR_CTRL,
> +		     (vb2_dma_contig_plane_dma_addr(&ctx->out.buf->vb2_buf, 0) + 7) >> 3);
> +	regmap_write(ge2d->map, GE2D_DST1_STRIDE_CTRL,
> +		     (ctx->out.pix_fmt.bytesperline + 7) >> 3);
> +
> +	regmap_write(ge2d->map, GE2D_GEN_CTRL0, 0);
> +	regmap_write(ge2d->map, GE2D_GEN_CTRL1,
> +		     FIELD_PREP(GE2D_INTERRUPT_CTRL, 2) |
> +		     FIELD_PREP(GE2D_SRC2_BURST_SIZE_CTRL, 3) |
> +		     FIELD_PREP(GE2D_SRC1_BURST_SIZE_CTRL, 0x3f));
> +
> +	regmap_write(ge2d->map, GE2D_GEN_CTRL2,
> +		     GE2D_SRC1_LITTLE_ENDIAN |
> +		     GE2D_SRC2_LITTLE_ENDIAN |
> +		     GE2D_DST_LITTLE_ENDIAN |
> +		     FIELD_PREP(GE2D_DST1_COLOR_MAP, ctx->out.fmt->hw_map) |
> +		     FIELD_PREP(GE2D_DST1_FORMAT, ctx->out.fmt->hw_fmt) |
> +		     FIELD_PREP(GE2D_SRC2_COLOR_MAP, ctx->out.fmt->hw_map) |
> +		     FIELD_PREP(GE2D_SRC2_FORMAT, ctx->out.fmt->hw_fmt) |
> +		     FIELD_PREP(GE2D_SRC1_COLOR_MAP, ctx->in.fmt->hw_map) |
> +		     FIELD_PREP(GE2D_SRC1_FORMAT, ctx->in.fmt->hw_fmt));
> +	regmap_write(ge2d->map, GE2D_GEN_CTRL3,
> +		     GE2D_DST1_ENABLE);
> +
> +	regmap_write(ge2d->map, GE2D_SRC1_CLIPY_START_END,
> +		     FIELD_PREP(GE2D_START, ctx->in.crop.top) |
> +		     FIELD_PREP(GE2D_END, ctx->in.crop.top + ctx->in.crop.height));
> +	regmap_write(ge2d->map, GE2D_SRC1_CLIPX_START_END,
> +		     FIELD_PREP(GE2D_START, ctx->in.crop.left) |
> +		     FIELD_PREP(GE2D_END, ctx->in.crop.left + ctx->in.crop.width));
> +	regmap_write(ge2d->map, GE2D_SRC2_CLIPY_START_END,
> +		     FIELD_PREP(GE2D_START, ctx->out.crop.top) |
> +		     FIELD_PREP(GE2D_END, ctx->out.crop.top + ctx->out.crop.height));
> +	regmap_write(ge2d->map, GE2D_SRC2_CLIPX_START_END,
> +		     FIELD_PREP(GE2D_START, ctx->out.crop.left) |
> +		     FIELD_PREP(GE2D_END, ctx->out.crop.left + ctx->out.crop.width));
> +	regmap_write(ge2d->map, GE2D_DST_CLIPY_START_END,
> +		     FIELD_PREP(GE2D_START, ctx->out.crop.top) |
> +		     FIELD_PREP(GE2D_END, ctx->out.crop.top + ctx->out.crop.height));
> +	regmap_write(ge2d->map, GE2D_DST_CLIPX_START_END,
> +		     FIELD_PREP(GE2D_START, ctx->out.crop.left) |
> +		     FIELD_PREP(GE2D_END, ctx->out.crop.left + ctx->out.crop.width));
> +
> +	regmap_write(ge2d->map, GE2D_SRC1_Y_START_END,
> +		     FIELD_PREP(GE2D_END, ctx->in.pix_fmt.height));
> +	regmap_write(ge2d->map, GE2D_SRC1_X_START_END,
> +		     FIELD_PREP(GE2D_END, ctx->in.pix_fmt.width));
> +	regmap_write(ge2d->map, GE2D_SRC2_Y_START_END,
> +		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.height));
> +	regmap_write(ge2d->map, GE2D_SRC2_X_START_END,
> +		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.width));
> +	regmap_write(ge2d->map, GE2D_DST_Y_START_END,
> +		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.height));
> +	regmap_write(ge2d->map, GE2D_DST_X_START_END,
> +		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.width));
> +
> +	/* Color, no blend, use source color */
> +	reg = GE2D_ALU_DO_COLOR_OPERATION_LOGIC(LOGIC_OPERATION_COPY,
> +						COLOR_FACTOR_SRC_COLOR);
> +
> +	if (ctx->in.fmt->alpha && ctx->out.fmt->alpha)
> +		/* Take source alpha */
> +		reg |= GE2D_ALU_DO_ALPHA_OPERATION_LOGIC(LOGIC_OPERATION_COPY,
> +							 COLOR_FACTOR_SRC_ALPHA);
> +	else if (!ctx->out.fmt->alpha)
> +		/* Set alpha to 0 */
> +		reg |= GE2D_ALU_DO_ALPHA_OPERATION_LOGIC(LOGIC_OPERATION_SET,
> +							 COLOR_FACTOR_ZERO);
> +	else
> +		/* Keep original alpha */
> +		reg |= GE2D_ALU_DO_ALPHA_OPERATION_LOGIC(LOGIC_OPERATION_COPY,
> +							 COLOR_FACTOR_DST_ALPHA);
> +
> +	regmap_write(ge2d->map, GE2D_ALU_OP_CTRL, reg);
> +
> +	/* Start */
> +	regmap_write(ge2d->map, GE2D_CMD_CTRL,
> +		     (ctx->xy_swap ? GE2D_DST_XY_SWAP : 0) |
> +		     (ctx->hflip ? GE2D_SRC1_Y_REV : 0) |
> +		     (ctx->vflip ? GE2D_SRC1_X_REV : 0) |
> +		     GE2D_CBUS_CMD_WR);
> +}
> +
> +static void device_run(void *priv)
> +{
> +	struct ge2d_ctx *ctx = priv;
> +	struct meson_ge2d *ge2d = ctx->ge2d;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&ge2d->ctrl_lock, flags);
> +
> +	ge2d->curr = ctx;
> +
> +	ctx->in.buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
> +	ctx->out.buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
> +
> +	ge2d_hw_start(ge2d);
> +
> +	spin_unlock_irqrestore(&ge2d->ctrl_lock, flags);
> +}
> +
> +static irqreturn_t ge2d_isr(int irq, void *priv)
> +{
> +	struct meson_ge2d *ge2d = priv;
> +	u32 intr;
> +
> +	regmap_read(ge2d->map, GE2D_STATUS0, &intr);
> +
> +	if (!(intr & GE2D_GE2D_BUSY)) {
> +		struct vb2_v4l2_buffer *src, *dst;
> +		struct ge2d_ctx *ctx = ge2d->curr;
> +
> +		ge2d->curr = NULL;
> +
> +		src = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> +		dst = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> +
> +		src->sequence = ctx->sequence_out++;
> +		dst->sequence = ctx->sequence_cap++;
> +
> +		dst->timecode = src->timecode;
> +		dst->vb2_buf.timestamp = src->vb2_buf.timestamp;
> +		dst->flags = src->flags;
> +
> +		v4l2_m2m_buf_done(src, VB2_BUF_STATE_DONE);
> +		v4l2_m2m_buf_done(dst, VB2_BUF_STATE_DONE);
> +		v4l2_m2m_job_finish(ge2d->m2m_dev, ctx->fh.m2m_ctx);
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static const struct v4l2_m2m_ops ge2d_m2m_ops = {
> +	.device_run = device_run,
> +};
> +
> +static int ge2d_queue_setup(struct vb2_queue *vq,
> +			    unsigned int *nbuffers, unsigned int *nplanes,
> +			    unsigned int sizes[], struct device *alloc_devs[])
> +{
> +	struct ge2d_ctx *ctx = vb2_get_drv_priv(vq);
> +	struct ge2d_frame *f = get_frame(ctx, vq->type);
> +
> +	if (IS_ERR(f))
> +		return PTR_ERR(f);
> +
> +	if (*nplanes)
> +		return sizes[0] < f->pix_fmt.sizeimage ? -EINVAL : 0;
> +
> +	sizes[0] = f->pix_fmt.sizeimage;
> +	*nplanes = 1;
> +
> +	return 0;
> +}
> +
> +static int ge2d_buf_prepare(struct vb2_buffer *vb)
> +{
> +	struct ge2d_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> +	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> +	struct ge2d_frame *f = get_frame(ctx, vb->vb2_queue->type);
> +
> +	if (IS_ERR(f))
> +		return PTR_ERR(f);
> +
> +	vbuf->field = V4L2_FIELD_NONE;
> +
> +	vb2_set_plane_payload(vb, 0, f->pix_fmt.sizeimage);
> +
> +	return 0;
> +}
> +
> +static void ge2d_buf_queue(struct vb2_buffer *vb)
> +{
> +	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> +	struct ge2d_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> +
> +	v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
> +}
> +
> +static int ge2d_start_streaming(struct vb2_queue *vq, unsigned int count)
> +{
> +	struct ge2d_ctx *ctx = vb2_get_drv_priv(vq);
> +
> +	if (V4L2_TYPE_IS_OUTPUT(vq->type))
> +		ctx->streamon_out = true;
> +	else
> +		ctx->streamon_cap = true;
> +
> +	if (!ctx->streamon_out)
> +		return 0;
> +
> +	ctx->sequence_out = 0;
> +	ctx->sequence_cap = 0;

This is wrong, which sequence counter you zero depends on vq->type.
It would only be an issue if userspace stops and restarts just one of the
queues.

This function can just be:

static int ge2d_start_streaming(struct vb2_queue *vq, unsigned int count)
{
	struct ge2d_ctx *ctx = vb2_get_drv_priv(vq);

	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
		ctx->streamon_out = true;
		ctx->sequence_out = 0;
	} else {
		ctx->streamon_cap = true;
		ctx->sequence_cap = 0;
	}
	return 0;
}



> +
> +	return 0;
> +}
> +
> +static void ge2d_stop_streaming(struct vb2_queue *vq)
> +{
> +	struct ge2d_ctx *ctx = vb2_get_drv_priv(vq);
> +	struct vb2_v4l2_buffer *vbuf;
> +
> +	if (V4L2_TYPE_IS_OUTPUT(vq->type))
> +		ctx->streamon_out = false;
> +	else
> +		ctx->streamon_cap = false;
> +
> +	for (;;) {
> +		if (V4L2_TYPE_IS_OUTPUT(vq->type))
> +			vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> +		else
> +			vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> +		if (!vbuf)
> +			break;
> +		v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
> +	}
> +}
> +
> +static const struct vb2_ops ge2d_qops = {
> +	.queue_setup = ge2d_queue_setup,
> +	.buf_prepare = ge2d_buf_prepare,
> +	.buf_queue = ge2d_buf_queue,
> +	.start_streaming = ge2d_start_streaming,
> +	.stop_streaming = ge2d_stop_streaming,
> +	.wait_prepare = vb2_ops_wait_prepare,
> +	.wait_finish = vb2_ops_wait_finish,
> +};
> +
> +static int
> +queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq)
> +{
> +	struct ge2d_ctx *ctx = priv;
> +	int ret;
> +
> +	src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
> +	src_vq->io_modes = VB2_MMAP | VB2_DMABUF;
> +	src_vq->drv_priv = ctx;
> +	src_vq->ops = &ge2d_qops;
> +	src_vq->mem_ops = &vb2_dma_contig_memops;
> +	src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> +	src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> +	src_vq->lock = &ctx->ge2d->mutex;
> +	src_vq->dev = ctx->ge2d->v4l2_dev.dev;
> +
> +	ret = vb2_queue_init(src_vq);
> +	if (ret)
> +		return ret;
> +
> +	dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> +	dst_vq->io_modes = VB2_MMAP | VB2_DMABUF;
> +	dst_vq->drv_priv = ctx;
> +	dst_vq->ops = &ge2d_qops;
> +	dst_vq->mem_ops = &vb2_dma_contig_memops;
> +	dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> +	dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> +	dst_vq->lock = &ctx->ge2d->mutex;
> +	dst_vq->dev = ctx->ge2d->v4l2_dev.dev;
> +
> +	return vb2_queue_init(dst_vq);
> +}
> +
> +static int ge2d_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct ge2d_ctx *ctx = container_of(ctrl->handler, struct ge2d_ctx,
> +					   ctrl_handler);
> +	struct v4l2_pix_format fmt;

Shouldn't this be zeroed? I.e.: fmt = {};
Unless vidioc_setup_cap_fmt() does that already?

> +	struct vb2_queue *vq;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&ctx->ge2d->ctrl_lock, flags);
> +	switch (ctrl->id) {
> +	case V4L2_CID_HFLIP:
> +		ctx->hflip = ctrl->val;
> +		break;
> +	case V4L2_CID_VFLIP:
> +		ctx->vflip = ctrl->val;
> +		break;
> +	case V4L2_CID_ROTATE:
> +		vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
> +		if (vb2_is_busy(vq))
> +			return -EBUSY;
> +
> +		if (ctrl->val == 90) {
> +			ctx->hflip = 0;
> +			ctx->vflip = 0;
> +			ctx->xy_swap = 1;
> +		} else if (ctrl->val == 180) {
> +			ctx->hflip = 1;
> +			ctx->vflip = 1;
> +			ctx->xy_swap = 0;
> +		} else if (ctrl->val == 270) {
> +			ctx->hflip = 1;
> +			ctx->vflip = 1;
> +			ctx->xy_swap = 1;
> +		} else {
> +			ctx->hflip = 0;
> +			ctx->vflip = 0;
> +			ctx->xy_swap = 0;
> +		}
> +
> +		vidioc_setup_cap_fmt(ctx, &fmt);

Ah, this is why you needed the forward reference to this function.

Why not just move the ctrl-related functions further down in the
source so you don't need that forward reference?

> +
> +		if (fmt.width != ctx->out.pix_fmt.width ||
> +		    fmt.height != ctx->out.pix_fmt.width ||
> +		    fmt.bytesperline > ctx->out.pix_fmt.bytesperline ||
> +		    fmt.sizeimage > ctx->out.pix_fmt.sizeimage)
> +			memcpy(&ctx->out.pix_fmt, &fmt, sizeof(struct v4l2_pix_format));

This can be replaced by 'ctx->out.pix_fmt = pix;'

This 'if' needs a comment, it's not clear what is happening here.

> +
> +		break;
> +	}
> +	spin_unlock_irqrestore(&ctx->ge2d->ctrl_lock, flags);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_ctrl_ops ge2d_ctrl_ops = {
> +	.s_ctrl = ge2d_s_ctrl,
> +};
> +
> +static int ge2d_setup_ctrls(struct ge2d_ctx *ctx)
> +{
> +	struct meson_ge2d *ge2d = ctx->ge2d;
> +
> +	v4l2_ctrl_handler_init(&ctx->ctrl_handler, 4);
> +
> +	v4l2_ctrl_new_std(&ctx->ctrl_handler, &ge2d_ctrl_ops,
> +			  V4L2_CID_HFLIP, 0, 1, 1, 0);
> +
> +	v4l2_ctrl_new_std(&ctx->ctrl_handler, &ge2d_ctrl_ops,
> +			  V4L2_CID_VFLIP, 0, 1, 1, 0);
> +
> +	v4l2_ctrl_new_std(&ctx->ctrl_handler, &ge2d_ctrl_ops,
> +			  V4L2_CID_ROTATE, 0, 270, 90, 0);
> +
> +	if (ctx->ctrl_handler.error) {
> +		int err = ctx->ctrl_handler.error;
> +
> +		v4l2_err(&ge2d->v4l2_dev, "%s failed\n", __func__);
> +		v4l2_ctrl_handler_free(&ctx->ctrl_handler);
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct ge2d_frame def_frame = {
> +	.pix_fmt = {
> +		.width = DEFAULT_WIDTH,
> +		.height = DEFAULT_HEIGHT,
> +		.field = V4L2_FIELD_NONE,
> +	},
> +	.crop.left = 0,
> +	.crop.top = 0,

No need for these two fields.

> +	.crop.width = DEFAULT_WIDTH,
> +	.crop.height = DEFAULT_HEIGHT,
> +	.fmt = &formats[0],
> +};
> +
> +static int ge2d_open(struct file *file)
> +{
> +	struct meson_ge2d *ge2d = video_drvdata(file);
> +	struct ge2d_ctx *ctx = NULL;
> +	int ret = 0;
> +
> +	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
> +	if (!ctx)
> +		return -ENOMEM;
> +	ctx->ge2d = ge2d;
> +
> +	/* Set default formats */
> +	ctx->in = def_frame;
> +	ctx->out = def_frame;
> +
> +	/* Initialize default frames */
> +	ctx->in.pix_fmt.bytesperline = ALIGN((ctx->in.pix_fmt.width * ctx->in.fmt->depth) / 8, 8);
> +	ctx->in.pix_fmt.sizeimage = ctx->in.pix_fmt.height * ctx->in.pix_fmt.bytesperline;
> +	memcpy(&ctx->out.pix_fmt, &ctx->in.pix_fmt, sizeof(struct v4l2_pix_format));

ctx->out.pix_fmt = ctx->in.pix_fmt;

Actually, why not just set these two fields (bytesperline and sizeimage) in def_frame?
Then you can delete these four lines and def_frame is always correct.

> +
> +	if (mutex_lock_interruptible(&ge2d->mutex)) {
> +		kfree(ctx);
> +		return -ERESTARTSYS;
> +	}
> +	ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(ge2d->m2m_dev, ctx, &queue_init);
> +	if (IS_ERR(ctx->fh.m2m_ctx)) {
> +		ret = PTR_ERR(ctx->fh.m2m_ctx);
> +		mutex_unlock(&ge2d->mutex);
> +		kfree(ctx);
> +		return ret;
> +	}
> +	v4l2_fh_init(&ctx->fh, video_devdata(file));
> +	file->private_data = &ctx->fh;
> +	v4l2_fh_add(&ctx->fh);
> +
> +	ge2d_setup_ctrls(ctx);
> +
> +	/* Write the default values to the ctx struct */
> +	v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
> +
> +	ctx->fh.ctrl_handler = &ctx->ctrl_handler;
> +	mutex_unlock(&ge2d->mutex);
> +
> +	return 0;
> +}
> +
> +static int ge2d_release(struct file *file)
> +{
> +	struct ge2d_ctx *ctx =
> +		container_of(file->private_data, struct ge2d_ctx, fh);
> +	struct meson_ge2d *ge2d = ctx->ge2d;
> +
> +	mutex_lock(&ge2d->mutex);
> +
> +	v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
> +
> +	v4l2_ctrl_handler_free(&ctx->ctrl_handler);
> +	v4l2_fh_del(&ctx->fh);
> +	v4l2_fh_exit(&ctx->fh);
> +	kfree(ctx);
> +
> +	mutex_unlock(&ge2d->mutex);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_file_operations ge2d_fops = {
> +	.owner = THIS_MODULE,
> +	.open = ge2d_open,
> +	.release = ge2d_release,
> +	.poll = v4l2_m2m_fop_poll,
> +	.unlocked_ioctl = video_ioctl2,
> +	.mmap = v4l2_m2m_fop_mmap,
> +};
> +
> +static int
> +vidioc_querycap(struct file *file, void *priv, struct v4l2_capability *cap)
> +{
> +	strscpy(cap->driver, GE2D_NAME, sizeof(cap->driver));
> +	strscpy(cap->card, GE2D_NAME, sizeof(cap->card));
> +	strscpy(cap->bus_info, "platform:" GE2D_NAME, sizeof(cap->bus_info));
> +
> +	return 0;
> +}
> +
> +static int vidioc_enum_fmt(struct file *file, void *priv, struct v4l2_fmtdesc *f)
> +{
> +	const struct ge2d_fmt *fmt;
> +
> +	if (f->index >= NUM_FORMATS)
> +		return -EINVAL;
> +
> +	fmt = &formats[f->index];
> +	f->pixelformat = fmt->fourcc;
> +
> +	return 0;
> +}
> +
> +static int vidioc_g_selection(struct file *file, void *priv,
> +			      struct v4l2_selection *s)
> +{
> +	struct ge2d_ctx *ctx = priv;
> +	struct ge2d_frame *f;
> +	bool use_frame = false;
> +
> +	f = get_frame(ctx, s->type);
> +	if (IS_ERR(f))
> +		return PTR_ERR(f);

Rather than relying on get_frame errors, just add a check for s->type
here. Ditto for s_selection.

> +
> +	switch (s->target) {
> +	case V4L2_SEL_TGT_COMPOSE_DEFAULT:
> +	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> +		if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> +			return -EINVAL;
> +		break;
> +	case V4L2_SEL_TGT_CROP_DEFAULT:
> +	case V4L2_SEL_TGT_CROP_BOUNDS:
> +		if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
> +			return -EINVAL;
> +		break;
> +	case V4L2_SEL_TGT_COMPOSE:
> +		if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> +			return -EINVAL;
> +		use_frame = true;
> +		break;
> +	case V4L2_SEL_TGT_CROP:
> +		if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
> +			return -EINVAL;
> +		use_frame = true;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	if (use_frame) {
> +		s->r = f->crop;
> +	} else {
> +		s->r.left = 0;
> +		s->r.top = 0;
> +		s->r.width = f->pix_fmt.width;
> +		s->r.height = f->pix_fmt.height;
> +	}
> +
> +	return 0;
> +}
> +
> +static int vidioc_s_selection(struct file *file, void *priv,
> +			      struct v4l2_selection *s)
> +{
> +	struct ge2d_ctx *ctx = priv;
> +	struct meson_ge2d *ge2d = ctx->ge2d;
> +	struct ge2d_frame *f;
> +	int ret = 0;
> +
> +	f = get_frame(ctx, s->type);
> +	if (IS_ERR(f))
> +		return PTR_ERR(f);
> +
> +	switch (s->target) {
> +	case V4L2_SEL_TGT_COMPOSE:
> +		/*
> +		 * COMPOSE target is only valid for capture buffer type, return
> +		 * error for output buffer type
> +		 */
> +		if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> +			return -EINVAL;
> +		break;
> +	case V4L2_SEL_TGT_CROP:
> +		/*
> +		 * CROP target is only valid for output buffer type, return
> +		 * error for capture buffer type
> +		 */
> +		if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
> +			return -EINVAL;
> +		break;
> +	/*
> +	 * bound and default crop/compose targets are invalid targets to
> +	 * try/set
> +	 */
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	if (s->r.top < 0 || s->r.left < 0) {
> +		v4l2_err(&ge2d->v4l2_dev,
> +			 "doesn't support negative values for top & left.\n");
> +		return -EINVAL;
> +	}
> +
> +	if (s->r.left + s->r.width > f->pix_fmt.width ||
> +	    s->r.top + s->r.height > f->pix_fmt.height ||
> +	    s->r.width < 0 || s->r.height < 0) {

width & height in v4l2_rect are unsigned, so can't be negative.

> +		v4l2_err(&ge2d->v4l2_dev, "unsupported crop value.\n");

crop -> rectangle

> +		return -EINVAL;
> +	}
> +
> +	f->crop = s->r;
> +
> +	return ret;
> +}
> +
> +static void vidioc_setup_cap_fmt(struct ge2d_ctx *ctx, struct v4l2_pix_format *f)
> +{
> +	struct ge2d_frame *frm_out = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
> +
> +	memcpy(f, &frm_out->pix_fmt, sizeof(struct v4l2_pix_format));

*f = frm_out->pix_fmt;

> +
> +	if (ctx->xy_swap) {
> +		f->width = frm_out->pix_fmt.height;
> +		f->height = frm_out->pix_fmt.width;
> +	}
> +}
> +
> +static int vidioc_try_fmt_cap(struct file *file, void *priv, struct v4l2_format *f)
> +{
> +	const struct ge2d_fmt *fmt = find_fmt(f);
> +	struct ge2d_ctx *ctx = priv;
> +	struct v4l2_pix_format fmt_cap;
> +
> +	vidioc_setup_cap_fmt(ctx, &fmt_cap);
> +
> +	fmt_cap.pixelformat = fmt->fourcc;
> +
> +	fmt_cap.bytesperline = max(f->fmt.pix.bytesperline,
> +				   ALIGN((fmt_cap.width * fmt->depth) >> 3, 8));
> +
> +	fmt_cap.sizeimage = max(f->fmt.pix.sizeimage,
> +				fmt_cap.height * fmt_cap.bytesperline);
> +
> +	memcpy(&f->fmt.pix, &fmt_cap, sizeof(struct v4l2_pix_format));

f->fmt.pix = fmt_cap;

> +
> +	return 0;
> +}
> +
> +static int vidioc_s_fmt_cap(struct file *file, void *priv, struct v4l2_format *f)
> +{
> +	struct ge2d_ctx *ctx = priv;
> +	struct meson_ge2d *ge2d = ctx->ge2d;
> +	struct vb2_queue *vq;
> +	struct ge2d_frame *frm;
> +	int ret = 0;
> +
> +	/* Adjust all values accordingly to the hardware capabilities
> +	 * and chosen format.
> +	 */
> +	ret = vidioc_try_fmt_cap(file, priv, f);
> +	if (ret)
> +		return ret;
> +
> +	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> +	if (vb2_is_busy(vq)) {
> +		v4l2_err(&ge2d->v4l2_dev, "queue (%d) bust\n", f->type);
> +		return -EBUSY;
> +	}
> +
> +	frm = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
> +	if (IS_ERR(frm))
> +		return PTR_ERR(frm);

Can't happen.

> +
> +	memcpy(&frm->pix_fmt, &f->fmt.pix, sizeof(struct v4l2_pix_format));
> +	frm->fmt = find_fmt(f);
> +	f->fmt.pix.pixelformat = frm->fmt->fourcc;
> +
> +	/* Reset crop settings */
> +	frm->crop.left = 0;
> +	frm->crop.top = 0;
> +	frm->crop.width = frm->pix_fmt.width;
> +	frm->crop.height = frm->pix_fmt.height;
> +
> +	return 0;
> +}
> +
> +static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
> +{
> +	struct ge2d_ctx *ctx = priv;
> +	struct vb2_queue *vq;
> +	struct ge2d_frame *frm;
> +
> +	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> +	if (!vq)
> +		return -EINVAL;
> +
> +	frm = get_frame(ctx, f->type);
> +	if (IS_ERR(frm))
> +		return PTR_ERR(frm);

Ditto.

I won't repeat myself, the same thing happens several times below.

> +
> +	memcpy(&f->fmt.pix, &frm->pix_fmt, sizeof(struct v4l2_pix_format));

Use assignment. Same several times below.

> +	f->fmt.pix.pixelformat = frm->fmt->fourcc;
> +
> +	return 0;
> +}
> +
> +static int vidioc_try_fmt_out(struct file *file, void *priv, struct v4l2_format *f)
> +{
> +	const struct ge2d_fmt *fmt = find_fmt(f);
> +
> +	f->fmt.pix.field = V4L2_FIELD_NONE;
> +	f->fmt.pix.pixelformat = fmt->fourcc;
> +
> +	if (f->fmt.pix.width > MAX_WIDTH)
> +		f->fmt.pix.width = MAX_WIDTH;
> +	if (f->fmt.pix.height > MAX_HEIGHT)
> +		f->fmt.pix.height = MAX_HEIGHT;
> +
> +	if (f->fmt.pix.width < 0)
> +		f->fmt.pix.width = 0;
> +	if (f->fmt.pix.height < 0)
> +		f->fmt.pix.height = 0;
> +
> +	f->fmt.pix.bytesperline = max(f->fmt.pix.bytesperline,
> +				      ALIGN((f->fmt.pix.width * fmt->depth) >> 3, 8));
> +
> +	f->fmt.pix.sizeimage = max(f->fmt.pix.sizeimage,
> +				   f->fmt.pix.height * f->fmt.pix.bytesperline);
> +
> +	return 0;
> +}
> +
> +static int vidioc_s_fmt_out(struct file *file, void *priv, struct v4l2_format *f)
> +{
> +	struct ge2d_ctx *ctx = priv;
> +	struct meson_ge2d *ge2d = ctx->ge2d;
> +	struct vb2_queue *vq;
> +	struct ge2d_frame *frm, *frm_cap;
> +	int ret = 0;
> +
> +	/* Adjust all values accordingly to the hardware capabilities
> +	 * and chosen format.
> +	 */
> +	ret = vidioc_try_fmt_out(file, priv, f);
> +	if (ret)
> +		return ret;
> +
> +	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> +	if (vb2_is_busy(vq)) {
> +		v4l2_err(&ge2d->v4l2_dev, "queue (%d) bust\n", f->type);
> +		return -EBUSY;
> +	}
> +
> +	frm = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
> +	if (IS_ERR(frm))
> +		return PTR_ERR(frm);
> +	frm_cap = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
> +	if (IS_ERR(frm_cap))
> +		return PTR_ERR(frm_cap);
> +
> +	memcpy(&frm->pix_fmt, &f->fmt.pix, sizeof(struct v4l2_pix_format));
> +	frm->fmt = find_fmt(f);
> +	f->fmt.pix.pixelformat = frm->fmt->fourcc;
> +
> +	/* Reset crop settings */
> +	frm->crop.left = 0;
> +	frm->crop.top = 0;
> +	frm->crop.width = frm->pix_fmt.width;
> +	frm->crop.height = frm->pix_fmt.height;
> +
> +	/* Propagate settings to capture */
> +	vidioc_setup_cap_fmt(ctx, &frm_cap->pix_fmt);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_ioctl_ops ge2d_ioctl_ops = {
> +	.vidioc_querycap = vidioc_querycap,
> +
> +	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt,
> +	.vidioc_g_fmt_vid_cap = vidioc_g_fmt,
> +	.vidioc_try_fmt_vid_cap = vidioc_try_fmt_cap,
> +	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_cap,
> +
> +	.vidioc_enum_fmt_vid_out = vidioc_enum_fmt,
> +	.vidioc_g_fmt_vid_out = vidioc_g_fmt,
> +	.vidioc_try_fmt_vid_out = vidioc_try_fmt_out,
> +	.vidioc_s_fmt_vid_out = vidioc_s_fmt_out,
> +
> +	.vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs,
> +	.vidioc_querybuf = v4l2_m2m_ioctl_querybuf,
> +	.vidioc_qbuf = v4l2_m2m_ioctl_qbuf,
> +	.vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf,
> +	.vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf,
> +	.vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs,
> +	.vidioc_expbuf = v4l2_m2m_ioctl_expbuf,
> +
> +	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
> +	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> +
> +	.vidioc_streamon = v4l2_m2m_ioctl_streamon,
> +	.vidioc_streamoff = v4l2_m2m_ioctl_streamoff,
> +
> +	.vidioc_g_selection = vidioc_g_selection,
> +	.vidioc_s_selection = vidioc_s_selection,
> +};
> +
> +static const struct video_device ge2d_videodev = {
> +	.name = "meson-ge2d",
> +	.fops = &ge2d_fops,
> +	.ioctl_ops = &ge2d_ioctl_ops,
> +	.minor = -1,
> +	.release = video_device_release,
> +	.vfl_dir = VFL_DIR_M2M,
> +	.device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING,
> +};
> +
> +static const struct regmap_config meson_ge2d_regmap_conf = {
> +	.reg_bits = 8,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +	.max_register = GE2D_SRC2_STRIDE_CTRL,
> +};
> +
> +static int ge2d_probe(struct platform_device *pdev)
> +{
> +	struct reset_control *rst;
> +	struct video_device *vfd;
> +	struct meson_ge2d *ge2d;
> +	struct resource *res;
> +	void __iomem *regs;
> +	int ret = 0;
> +	int irq;
> +
> +	if (!pdev->dev.of_node)
> +		return -ENODEV;
> +
> +	ge2d = devm_kzalloc(&pdev->dev, sizeof(*ge2d), GFP_KERNEL);
> +	if (!ge2d)
> +		return -ENOMEM;
> +
> +	ge2d->dev = &pdev->dev;
> +	spin_lock_init(&ge2d->ctrl_lock);
> +	mutex_init(&ge2d->mutex);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	regs = devm_ioremap_resource(ge2d->dev, res);
> +	if (IS_ERR(regs))
> +		return PTR_ERR(regs);
> +
> +	ge2d->map = devm_regmap_init_mmio(ge2d->dev, regs,
> +					  &meson_ge2d_regmap_conf);
> +	if (IS_ERR(ge2d->map))
> +		return PTR_ERR(ge2d->map);
> +
> +	irq = platform_get_irq(pdev, 0);
> +	ret = devm_request_irq(ge2d->dev, irq, ge2d_isr, 0,
> +			       dev_name(ge2d->dev), ge2d);
> +	if (ret < 0) {
> +		dev_err(ge2d->dev, "failed to request irq\n");
> +		return ret;
> +	}
> +
> +	rst = devm_reset_control_get(ge2d->dev, NULL);
> +	if (IS_ERR(rst)) {
> +		dev_err(ge2d->dev, "failed to get core reset controller\n");
> +		return PTR_ERR(rst);
> +	}
> +
> +	ge2d->clk = devm_clk_get(ge2d->dev, NULL);
> +	if (IS_ERR(ge2d->clk)) {
> +		dev_err(ge2d->dev, "failed to get clock\n");
> +		return PTR_ERR(ge2d->clk);
> +	}
> +
> +	reset_control_assert(rst);
> +	udelay(1);
> +	reset_control_deassert(rst);
> +
> +	ret = clk_prepare_enable(ge2d->clk);
> +	if (ret) {
> +		dev_err(ge2d->dev, "Cannot enable ge2d sclk: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = v4l2_device_register(&pdev->dev, &ge2d->v4l2_dev);
> +	if (ret)
> +		goto disable_clks;
> +
> +	vfd = video_device_alloc();
> +	if (!vfd) {
> +		v4l2_err(&ge2d->v4l2_dev, "Failed to allocate video device\n");
> +		goto unreg_v4l2_dev;
> +	}
> +
> +	*vfd = ge2d_videodev;
> +	vfd->lock = &ge2d->mutex;
> +	vfd->v4l2_dev = &ge2d->v4l2_dev;
> +
> +	video_set_drvdata(vfd, ge2d);
> +	ge2d->vfd = vfd;
> +
> +	platform_set_drvdata(pdev, ge2d);
> +	ge2d->m2m_dev = v4l2_m2m_init(&ge2d_m2m_ops);
> +	if (IS_ERR(ge2d->m2m_dev)) {
> +		v4l2_err(&ge2d->v4l2_dev, "Failed to init mem2mem device\n");
> +		ret = PTR_ERR(ge2d->m2m_dev);
> +		goto unreg_video_dev;
> +	}
> +
> +	ret = video_register_device(vfd, VFL_TYPE_VIDEO, -1);
> +	if (ret) {
> +		v4l2_err(&ge2d->v4l2_dev, "Failed to register video device\n");
> +		goto rel_vdev;
> +	}
> +
> +	v4l2_info(&ge2d->v4l2_dev, "Registered %s as /dev/%s\n",
> +		  vfd->name, video_device_node_name(vfd));
> +
> +	return 0;
> +
> +rel_vdev:
> +	video_device_release(vfd);
> +unreg_video_dev:
> +	video_unregister_device(ge2d->vfd);
> +unreg_v4l2_dev:
> +	v4l2_device_unregister(&ge2d->v4l2_dev);
> +disable_clks:
> +	clk_disable_unprepare(ge2d->clk);
> +
> +	return ret;
> +}
> +
> +static int ge2d_remove(struct platform_device *pdev)
> +{
> +	struct meson_ge2d *ge2d = platform_get_drvdata(pdev);
> +
> +	v4l2_m2m_release(ge2d->m2m_dev);
> +	video_unregister_device(ge2d->vfd);
> +	v4l2_device_unregister(&ge2d->v4l2_dev);
> +
> +	clk_disable_unprepare(ge2d->clk);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id meson_ge2d_match[] = {
> +	{
> +		.compatible = "amlogic,axg-ge2d",
> +	},
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(of, meson_ge2d_match);
> +
> +static struct platform_driver ge2d_drv = {
> +	.probe = ge2d_probe,
> +	.remove = ge2d_remove,
> +	.driver = {
> +		.name = "meson-ge2d",
> +		.of_match_table = meson_ge2d_match,
> +	},
> +};
> +
> +module_platform_driver(ge2d_drv);
> +
> +MODULE_AUTHOR("Neil Armstrong <narmstrong at baylibre.com>");
> +MODULE_DESCRIPTION("Amlogic 2D Graphic Acceleration Unit");
> +MODULE_LICENSE("GPL");
> 

Regards,

	Hans



More information about the linux-amlogic mailing list