[PATCH RESEND v1] drm/meson: viu: fix setting the OSD burst length in VIU_OSD1_FIFO_CTRL_STAT
Neil Armstrong
narmstrong at baylibre.com
Mon Jun 22 03:58:16 EDT 2020
Hi Martin,
On 20/06/2020 17:57, Martin Blumenstingl wrote:
> The burst length is configured in VIU_OSD1_FIFO_CTRL_STAT[31] and
> VIU_OSD1_FIFO_CTRL_STAT[11:10]. The public S905D3 datasheet describes
> this as:
> - 0x0 = up to 24 per burst
> - 0x1 = up to 32 per burst
> - 0x2 = up to 48 per burst
> - 0x3 = up to 64 per burst
> - 0x4 = up to 96 per burst
> - 0x5 = up to 128 per burst
>
> The lower two bits map to VIU_OSD1_FIFO_CTRL_STAT[11:10] while the upper
> bit maps to VIU_OSD1_FIFO_CTRL_STAT[31].
>
> Replace meson_viu_osd_burst_length_reg() with pre-defined macros which
> set these values. meson_viu_osd_burst_length_reg() always returned 0
> (for the two used values: 32 and 64 at least) and thus incorrectly set
> the burst size to 24.
>
> Fixes: 147ae1cbaa1842 ("drm: meson: viu: use proper macros instead of magic constants")
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
> re-send of v1 [0] with no changes as I still noticed that this is
> sitting in my tree and I wasn't asked to change anything in v1.
>
>
> [0] https://patchwork.kernel.org/patch/11510045/
>
>
> drivers/gpu/drm/meson/meson_registers.h | 6 ++++++
> drivers/gpu/drm/meson/meson_viu.c | 11 ++---------
> 2 files changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
> index 8ea00546cd4e..049c4bfe2a3a 100644
> --- a/drivers/gpu/drm/meson/meson_registers.h
> +++ b/drivers/gpu/drm/meson/meson_registers.h
> @@ -261,6 +261,12 @@
> #define VIU_OSD_FIFO_DEPTH_VAL(val) ((val & 0x7f) << 12)
> #define VIU_OSD_WORDS_PER_BURST(words) (((words & 0x4) >> 1) << 22)
> #define VIU_OSD_FIFO_LIMITS(size) ((size & 0xf) << 24)
> +#define VIU_OSD_BURST_LENGTH_24 (0x0 << 31 | 0x0 << 10)
> +#define VIU_OSD_BURST_LENGTH_32 (0x0 << 31 | 0x1 << 10)
> +#define VIU_OSD_BURST_LENGTH_48 (0x0 << 31 | 0x2 << 10)
> +#define VIU_OSD_BURST_LENGTH_64 (0x0 << 31 | 0x3 << 10)
> +#define VIU_OSD_BURST_LENGTH_96 (0x1 << 31 | 0x0 << 10)
> +#define VIU_OSD_BURST_LENGTH_128 (0x1 << 31 | 0x1 << 10)
>
> #define VD1_IF0_GEN_REG 0x1a50
> #define VD1_IF0_CANVAS0 0x1a51
> diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c
> index 304f8ff1339c..aede0c67a57f 100644
> --- a/drivers/gpu/drm/meson/meson_viu.c
> +++ b/drivers/gpu/drm/meson/meson_viu.c
> @@ -411,13 +411,6 @@ void meson_viu_gxm_disable_osd1_afbc(struct meson_drm *priv)
> priv->io_base + _REG(VIU_MISC_CTRL1));
> }
>
> -static inline uint32_t meson_viu_osd_burst_length_reg(uint32_t length)
> -{
> - uint32_t val = (((length & 0x80) % 24) / 12);
> -
> - return (((val & 0x3) << 10) | (((val & 0x4) >> 2) << 31));
> -}
> -
> void meson_viu_init(struct meson_drm *priv)
> {
> uint32_t reg;
> @@ -444,9 +437,9 @@ void meson_viu_init(struct meson_drm *priv)
> VIU_OSD_FIFO_LIMITS(2); /* fifo_lim: 2*16=32 */
>
> if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
> - reg |= meson_viu_osd_burst_length_reg(32);
> + reg |= VIU_OSD_BURST_LENGTH_32;
> else
> - reg |= meson_viu_osd_burst_length_reg(64);
> + reg |= VIU_OSD_BURST_LENGTH_64;
>
> writel_relaxed(reg, priv->io_base + _REG(VIU_OSD1_FIFO_CTRL_STAT));
> writel_relaxed(reg, priv->io_base + _REG(VIU_OSD2_FIFO_CTRL_STAT));
>
Completely forgot this one, will test asap.
Neil
More information about the linux-amlogic
mailing list