[PATCH] arm64: dts: meson-gx: Switch to the meson-ee-pwrc bindings
Neil Armstrong
narmstrong at baylibre.com
Mon Jun 22 03:55:35 EDT 2020
On 20/06/2020 18:12, Martin Blumenstingl wrote:
> The "amlogic,meson-gx-pwrc-vpu" binding only supports the VPU power
> domain, while actually there are more power domains behind that set of
> registers. Switch to the new bindings so we can add more power domains
> as needed.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 18 ++++++++++--------
> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +++++--
> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 7 +++++--
> 3 files changed, 20 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index ba63c36b22e0..0edd137151f8 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -12,6 +12,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/meson-gxbb-power.h>
> #include <dt-bindings/thermal/thermal.h>
>
> / {
> @@ -60,7 +61,7 @@ simplefb_cvbs: framebuffer-cvbs {
> compatible = "amlogic,simple-framebuffer",
> "simple-framebuffer";
> amlogic,pipeline = "vpu-cvbs";
> - power-domains = <&pwrc_vpu>;
> + power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
> status = "disabled";
> };
>
> @@ -68,7 +69,7 @@ simplefb_hdmi: framebuffer-hdmi {
> compatible = "amlogic,simple-framebuffer",
> "simple-framebuffer";
> amlogic,pipeline = "vpu-hdmi";
> - power-domains = <&pwrc_vpu>;
> + power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
> status = "disabled";
> };
> };
> @@ -438,12 +439,6 @@ sysctrl_AO: sys-ctrl at 0 {
> compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
> reg = <0x0 0x0 0x0 0x100>;
>
> - pwrc_vpu: power-controller-vpu {
> - compatible = "amlogic,meson-gx-pwrc-vpu";
> - #power-domain-cells = <0>;
> - amlogic,hhi-sysctrl = <&sysctrl>;
> - };
> -
> clkc_AO: clock-controller {
> compatible = "amlogic,meson-gx-aoclkc";
> #clock-cells = <1>;
> @@ -552,6 +547,12 @@ hiubus: bus at c883c000 {
> sysctrl: system-controller at 0 {
> compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
> reg = <0 0 0 0x400>;
> +
> + pwrc: power-controller {
> + compatible = "amlogic,meson-gxbb-pwrc";
> + #power-domain-cells = <1>;
> + amlogic,ao-sysctrl = <&sysctrl_AO>;
> + };
> };
>
> mailbox: mailbox at 404 {
> @@ -574,6 +575,7 @@ ethmac: ethernet at c9410000 {
> interrupt-names = "macirq";
> rx-fifo-depth = <4096>;
> tx-fifo-depth = <2048>;
> + power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
> status = "disabled";
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> index 03c25b9facff..ea50dd434887 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> @@ -748,7 +748,7 @@ mux {
> };
> };
>
> -&pwrc_vpu {
> +&pwrc {
> resets = <&reset RESET_VIU>,
> <&reset RESET_VENC>,
> <&reset RESET_VCBUS>,
> @@ -761,6 +761,9 @@ &pwrc_vpu {
> <&reset RESET_VDI6>,
> <&reset RESET_VENCL>,
> <&reset RESET_VID_LOCK>;
> + reset-names = "viu", "venc", "vcbus", "bt656",
> + "dvin", "rdma", "venci", "vencp",
> + "vdac", "vdi6", "vencl", "vid_lock";
> clocks = <&clkc CLKID_VPU>,
> <&clkc CLKID_VAPB>;
> clock-names = "vpu", "vapb";
> @@ -867,7 +870,7 @@ &uart_C {
>
> &vpu {
> compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
> - power-domains = <&pwrc_vpu>;
> + power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
> };
>
> &vdec {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index 60484bbc7272..beb5fc79d186 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -783,7 +783,7 @@ external_mdio: mdio at 2009087f {
> };
> };
>
> -&pwrc_vpu {
> +&pwrc {
> resets = <&reset RESET_VIU>,
> <&reset RESET_VENC>,
> <&reset RESET_VCBUS>,
> @@ -796,6 +796,9 @@ &pwrc_vpu {
> <&reset RESET_VDI6>,
> <&reset RESET_VENCL>,
> <&reset RESET_VID_LOCK>;
> + reset-names = "viu", "venc", "vcbus", "bt656",
> + "dvin", "rdma", "venci", "vencp",
> + "vdac", "vdi6", "vencl", "vid_lock";
> clocks = <&clkc CLKID_VPU>,
> <&clkc CLKID_VAPB>;
> clock-names = "vpu", "vapb";
> @@ -902,7 +905,7 @@ &uart_C {
>
> &vpu {
> compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
> - power-domains = <&pwrc_vpu>;
> + power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
> };
>
> &vdec {
>
Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>
More information about the linux-amlogic
mailing list