[PATCH 2/2] arm64: dts: meson: add support for the WeTek Core 2

Christian Hewitt christianshewitt at gmail.com
Sat Jul 18 05:07:02 EDT 2020


> On 18 Jul 2020, at 12:52 pm, Neil Armstrong <narmstrong at baylibre.com> wrote:
> 
> Le 18/07/2020 à 07:00, Christian Hewitt a écrit :
>> The WeTek Core2 is a commercial device based on the Amlogic Q200 reference
>> design but with the following differences:
>> 
>> - 3GB RAM, 32GB eMMC
>> - Blue and Red LEDs used to signal on/off status
>> - uart_AO can be accessed after opening the case; soldering required
>> - USB OTG is not accessible (inside the case)
>> - Realtek RTL8152 Ethernet (internal USB connection)
>> 
>> Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
>> ---
>> arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>> .../dts/amlogic/meson-gxm-wetek-core2.dts     | 90 +++++++++++++++++++
>> 2 files changed, 91 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
>> 
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index 5cac4d1d487d..4e2239ffcaa5 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
>> new file mode 100644
>> index 000000000000..44fc5ea38dc0
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
>> @@ -0,0 +1,90 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2020 Christian Hewitt <christianshewitt at gmail.com>
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "meson-gxm.dtsi"
>> +#include "meson-gx-p23x-q20x.dtsi"
>> +#include <dt-bindings/input/input.h>
>> +#include <dt-bindings/leds/common.h>
>> +
>> +/ {
>> +	compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm";
>> +	model = "WeTek Core 2";
>> +
>> +	memory at 0 {
>> +		device_type = "memory";
>> +		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
>> +	};
>> +
>> +	leds {
>> +		compatible = "gpio-leds";
>> +
>> +		blue {
>> +			color = <LED_COLOR_ID_BLUE>;
>> +			function = LED_FUNCTION_STATUS;
>> +			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
>> +			default-state = "on";
>> +		};
>> +	};
>> +
>> +	adc-keys {
>> +		compatible = "adc-keys";
>> +		io-channels = <&saradc 0>;
>> +		io-channel-names = "buttons";
>> +		keyup-threshold-microvolt = <1710000>;
>> +
>> +		button-update {
>> +			label = "update";
>> +			linux,code = <KEY_VENDOR>;
>> +			press-threshold-microvolt = <10000>;
>> +		};
>> +	};
>> +
>> +	gpio-keys-polled {
>> +		compatible = "gpio-keys-polled";
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		poll-interval = <100>;
>> +
>> +		button-power {
>> +			label = "power";
>> +			linux,code = <KEY_POWER>;
>> +			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
>> +		};
>> +	};
>> +};
>> +
>> +/* This is disabled as Realtek RTL8152 USB provides Ethernet */
>> +&ethmac {
>> +	status = "disabled";
>> +	phy-mode = "rmii";
>> +	phy-handle = <&internal_phy>;
> 
> I think you can remove these 2 lines
> 
>> +};
>> +
>> +&internal_phy {
>> +	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
>> +	pinctrl-names = "default";
> 
> Simply add :
> status = "disabled";
> 
>> +};
>> +
>> +&ir {
>> +	linux,rc-map-name = "rc-wetek-play2";
>> +};
>> +
>> +/* This is connected to the Bluetooth module: */
>> +&uart_A {
>> +	status = "okay";
>> +	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
>> +	pinctrl-names = "default";
>> +	uart-has-rtscts;
>> +
>> +	bluetooth {
>> +		compatible = "brcm,bcm43438-bt";
>> +		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
>> +		max-speed = <2000000>;
>> +		clocks = <&wifi32k>;
>> +		clock-names = "lpo";
>> +	};
>> +};
>> 
> 
> 
> Otherwise looks good
> 
> Neil

I’ve tested both changes, both are fine so will send v2.

Thanks for the quick review.

Christian




More information about the linux-amlogic mailing list